No spark when cranking with CBR coils, it sparks in test mode
4 Attachment(s)
So ive got some CBR coils wired up and now cant get it to start.
I tested all spark plugs in test mode and they all work. But when cranking it doesn't do anything Im using MS3x (i think 3.57) and CBR coils with and Bosch 211 igniter Spark A - cil1 Spark B - cil3 Spark C - cil4 Spark D - cil2 Ignition output - Falling edge Spark output - Going high Number of coils - Coil on plug Spark hardware in use - MS3X spark Cam input(if used) - MS3x Cam in Ive added my tune and my datalog when cranking. |
Got it,
This site said it needed to on falling edge Bosch 0 227 100 211 Ignition Control with MegaSquirt-II but it i didnt change the CAS so it would still be rising edge. |
CBR coils are designed to be fired with a CDI.
|
What would be the disadvantage in using the Bosch 211, they are working now.
|
All times are GMT -4. The time now is 08:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands