No tach in 94 1.8 MX-5 with MS3X
Hello my dearest Megasquirt-Heros,
a friend of mine has a 94 1.8 MX-5 with a MS3X (build with an adapter harness, but according to Franks How-to) up and running. Only problem is - he doesn't get a tach reading with the MS3X. The input is wired from tach-out on the MS3X to 2I and activated in TS. Any jumper, pullup or other thing to do? I thought it should be working with just a connection between the output and the pin 2I. Thanks for your suggestions! |
sounds like he has an early ODB1 94?
|
My fault - it's not a 94 it's a 95. 2 connector ECU - as it is a German car - I guess it's non OBD
|
only the 95.5 had the tachout iirc.
try the 1k resistor to b+ and ig-. |
Thanks, he's gonna try this.
|
All times are GMT -4. The time now is 01:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands