Please help with Tuning!
I was able to finally get my MS working last week and been driving around town since, but some problems do arise. First of all, i recently upgraded to hi-res which fixed a few problems but induced other problems. My AE and DE are completely untuned. At times my car idles at a nearly perfect 850 rpm at 13.80-14.7 afr. But sometimes at a traffic light it would just go super lean and attempt to die. When this happens i press on the gas to keep it alive, right when i do this, i hear pinging!
Another problem is when im cruising and let go off the throttle. The car goes completely lean and i feel it surge.
Third problem is AC. At idle when i press on the AC the car goes super lean (19-22).
I will include a msq and a few log files.
BTW this is a 1994 running hi res MS with 480cc injectors. Also, the MSQ is untuned because each time i run it though MLV the car wont even attempt to idle.
Another problem is when im cruising and let go off the throttle. The car goes completely lean and i feel it surge.
Third problem is AC. At idle when i press on the AC the car goes super lean (19-22).
I will include a msq and a few log files.
BTW this is a 1994 running hi res MS with 480cc injectors. Also, the MSQ is untuned because each time i run it though MLV the car wont even attempt to idle.
Uh, it shouldn't be. I changed the req fuel and ve table, and maybe one other thing. If it skewed the AFR table, then just export the ve table I put in and import it into your msq. And change your req fuel to what I put in that msq
i get 2 errors when i load it up.
WARNING(04): Constant "afrBins1" units mismatch, "Volts" in msq, expected "AFR" from ini.
WARNING(04): Constant "afrBins2" units mismatch, "Volts" in msq, expected "AFR" from ini.
maybe thats why, i just imported my 14.7 table in. So far, at idle its VERY rich. stable at 10.
Pat, do you have aim or something?
WARNING(04): Constant "afrBins1" units mismatch, "Volts" in msq, expected "AFR" from ini.
WARNING(04): Constant "afrBins2" units mismatch, "Volts" in msq, expected "AFR" from ini.
maybe thats why, i just imported my 14.7 table in. So far, at idle its VERY rich. stable at 10.
Pat, do you have aim or something?
Ok, here is your MSQ with VE scaled to about 45% of what it was originally. Also included is a log file doing some WOTs down my street. Also, notice the lean spikes in the middle. That is me letting go off throttle while still in gear.
First map is a stretch of highway. Ignore the Idle AFR, i fixed it on the next map.
The other map is a quick and not a good log from the street leading to my home. Idle fixed this time.
The other map is a quick and not a good log from the street leading to my home. Idle fixed this time.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM





