please look at my .msq and tell me what's wrong with cold start
#1
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
please look at my .msq and tell me what's wrong with cold start
It cranks fine, then 5 seconds later it wants to idle at like 400rpm. I've tried everything I know.
9093mspnp, stock injectors, GM IAT, easytherm'd. Runs great hot.
I've tried other .msq's, back to the DIY base map, and still have this problem.
9093mspnp, stock injectors, GM IAT, easytherm'd. Runs great hot.
I've tried other .msq's, back to the DIY base map, and still have this problem.
Last edited by hustler; 12-30-2007 at 12:40 PM.
#4
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
On the afterstart page, try setting the 'fixed ase/map time period' to 10 seconds. It's going to run rich for 10 seconds instead of 5 after startup, (and don't everyone start doing this for no reason, please) but it may help you learn something. If it helps, then you probable just have too little afterstart enrichment at the temperature range that you're cranking the car at-- look at that same page, at the CLT range that you have the problem at, and add some ASE there....
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#5
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
I dl'd another .msq from DIY and it works now. I have a few copies of teh DIY msq, and maybe the file was corrupted somewhere along the way because the .msq that works matches the .msq's that don't. Every setting is exactly the same, and one works, the other doesn't.
thanks for the help as usual.
thanks for the help as usual.
Thread
Thread Starter
Forum
Replies
Last Post