Problem with mega log viewer
 

Hey guys this might be a dumb question but I can’t find anything else on this current problem. I run a data log run the car around the block. Get back home to look at it and load it up and it bring up an entire different tune didn’t realize at first till I looked at the scaling on the fueltable in mega log compared to my scaling there’s went to 240 mine was still stock settings at 100. If I run be analyze it brings up a completely different tune. Completely different settings. Not sure if this is a problem with megalogviewer. Thought maybe I loaded something wrong but I did it again and the same thing happens.

You tell MLV what tune to load. Look for the words on a click button: "Open Tune File". If that is what you are doing, then you must be opening the wrong tune. Saving your latest tune with a unique name might be helpful.

Thats exactly what I do haha I even just did a log at idle. And it brings up a completely different map up. I name all my logs something so I can remember what and where they are in my computer.

There are “tunes” and there are “logs”.

Yes I know that I’m saying if I open a log of the tune I just took. The two tables that come up in mlv are not my tables. Both fuel and timing completely different. Just for shits and giggles I used ve analyze to see what would happen with this it sent a completely different tune over to tunerstudio. Different engine settings and all. This is the free version of mlv I don’t know if that has something to with it Or not

You're not getting it.

MLV also reads a tune. Make sure the tune it is reading matches the log you are viewing. Clearly right now it isn't. Go through the menus find the option to load the tune, select and load your current tune.