Problem with mega log viewer
#1
Problem with mega log viewer
Hey guys this might be a dumb question but I can’t find anything else on this current problem. I run a data log run the car around the block. Get back home to look at it and load it up and it bring up an entire different tune didn’t realize at first till I looked at the scaling on the fueltable in mega log compared to my scaling there’s went to 240 mine was still stock settings at 100. If I run be analyze it brings up a completely different tune. Completely different settings. Not sure if this is a problem with megalogviewer. Thought maybe I loaded something wrong but I did it again and the same thing happens.
#2
Retired Mech Design Engr
iTrader: (3)
Join Date: Jan 2013
Location: Seneca, SC
Posts: 5,009
Total Cats: 857
You tell MLV what tune to load. Look for the words on a click button: "Open Tune File". If that is what you are doing, then you must be opening the wrong tune. Saving your latest tune with a unique name might be helpful.
#5
Yes I know that I’m saying if I open a log of the tune I just took. The two tables that come up in mlv are not my tables. Both fuel and timing completely different. Just for ***** and giggles I used ve analyze to see what would happen with this it sent a completely different tune over to tunerstudio. Different engine settings and all. This is the free version of mlv I don’t know if that has something to with it Or not
Thread
Thread Starter
Forum
Replies
Last Post