Progressive WI w/ MSPNP?
#22
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
fuel injectors aren't generally stainless and as a result will rust.
it's a moot point anyway you still need a spare injector driver to ...errr... drive it, the aquamist HSV is basically a stainless injector minus the atomizing nozzle.
it's a moot point anyway you still need a spare injector driver to ...errr... drive it, the aquamist HSV is basically a stainless injector minus the atomizing nozzle.
#26
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
everything I've researched about DIY WI has told me not to use fuel injectors cos they rust.
so I'm not going to use a fuel injector.
plus if I were to use a fuel injector i'd need to find one that's rated at 150cc, make a rail for it etc etc. CBA
so I'm not going to use a fuel injector.
plus if I were to use a fuel injector i'd need to find one that's rated at 150cc, make a rail for it etc etc. CBA
#27
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
You're right that common injectors will rust--
Here's a page on DIY WI systems that recommends the Aquamist nozzles even at the extra expense-- http://users.frii.com/maphill/wi.html
Or what about these: http://www.alcohol-injection.com/alc...nozzles-7.html
Here's a page on DIY WI systems that recommends the Aquamist nozzles even at the extra expense-- http://users.frii.com/maphill/wi.html
Or what about these: http://www.alcohol-injection.com/alc...nozzles-7.html
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#28
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
You're right that common injectors will rust--
Here's a page on DIY WI systems that recommends the Aquamist nozzles even at the extra expense-- http://users.frii.com/maphill/wi.html
Here's a page on DIY WI systems that recommends the Aquamist nozzles even at the extra expense-- http://users.frii.com/maphill/wi.html
Or what about these: http://www.alcohol-injection.com/alc...nozzles-7.html
Thread
Thread Starter
Forum
Replies
Last Post
Fireindc
Build Threads
1129
Yesterday 05:42 PM
Sclippy96
MEGAsquirt
6
12-25-2014 05:49 AM