Notices
MEGAsquirt A place to collectively sort out this megasquirt gizmo

Proper timing and EGT at cruise

Thread Tools
 
Search this Thread
 
Old Jul 13, 2012 | 09:36 AM
  #21  
Techsalvager's Avatar
I'm Miserable!
 
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Default

1300f EGT cylinder 4 at cruise
38 degrees of timing, around stoich 14.7~

1200f you say around 40-45?
hmm

how close is your egt to the port?
mine is about 1.5inches from the port
Reply
Leave a poscat -1 Leave a negcat
Old Jul 13, 2012 | 09:53 AM
  #22  
hustler's Avatar
Tour de Franzia
iTrader: (6)
 
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Default

I'd like to instal the EGT gauge I've had for 5-years, but Manual and I don't get along.
Old Jul 13, 2012 | 09:59 AM
  #23  
Techsalvager's Avatar
I'm Miserable!
 
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Default

forgot to mention 36-38mpg highway cruising
5 speed, 4.30 rear 1.6l
460 pisser rx7 460 injectors
38 degrees of timing and usually tad leaner then stoich if not at stoich.
I haven't tried for a lean then 15.4 test in a while.
Reply
Leave a poscat -1 Leave a negcat
Old Jul 13, 2012 | 10:26 AM
  #24  
hustler's Avatar
Tour de Franzia
iTrader: (6)
 
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Default

What is your cruise speed?
Old Jul 13, 2012 | 10:34 AM
  #25  
Reverant's Avatar
Elite Member
iTrader: (10)
 
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
Default

I'm there as well (36-38mpg).

Cruising speed is 75mph. 6-speed, 3.636 gears.
Old Jul 13, 2012 | 10:41 AM
  #26  
hustler's Avatar
Tour de Franzia
iTrader: (6)
 
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Default

Originally Posted by Reverant
I'm there as well (36-38mpg).

Cruising speed is 75mph. 6-speed, 3.636 gears.
WTF am I doing wrong aside from gears?

BTW, this is 79mph with a GPS, the speedo says ~84mph; the tach says about 4100rpm.
Old Jul 13, 2012 | 11:12 AM
  #27  
Techsalvager's Avatar
I'm Miserable!
 
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Default

depends on area, 65mph to 75mph
around 80mph on the interstates
Reply
Leave a poscat -1 Leave a negcat
Old Jul 13, 2012 | 11:25 AM
  #28  
hustler's Avatar
Tour de Franzia
iTrader: (6)
 
Joined: Jun 2006
Posts: 29,085
Total Cats: 375
From: Republic of Dallas
Default

Originally Posted by Techsalvager
depends on area, 65mph to 75mph
around 80mph on the interstates
Methinks my engine is hurt. I hope that's it, or I know nothing about tuning.
Old Jul 13, 2012 | 11:47 AM
  #29  
Techsalvager's Avatar
I'm Miserable!
 
Joined: Jun 2009
Posts: 1,866
Total Cats: 0
From: albany, ga
Default

why not create a new thread seperate of this asking peoples gas mileage and settings
Reply
Leave a poscat -1 Leave a negcat
Old Jul 13, 2012 | 11:35 PM
  #30  
Faeflora's Avatar
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Default

Originally Posted by Techsalvager
why not create a new thread seperate of this asking peoples gas mileage and settings
Why not create a new thread of ur wrecktum?
Old Jul 14, 2012 | 04:09 AM
  #31  
Reverant's Avatar
Elite Member
iTrader: (10)
 
Joined: Jun 2006
Posts: 6,020
Total Cats: 369
From: Athens, Greece
Default

Originally Posted by hustler
WTF am I doing wrong aside from gears?

BTW, this is 79mph with a GPS, the speedo says ~84mph; the tach says about 4100rpm.
With these 3.636 gears, 75mph is at 3200rpm. If PW is the same at both crusing RPMs, then you are spending 4100/3200 = 28% more fuel.

Of course the PWs won't be exactly the same (should be higher at 3200rpm) but fuel consumption would still be higher at 4100rpm.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
Apr 12, 2021 04:21 PM
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM
Rick02R
WTB
3
Jan 3, 2016 07:18 PM
tazswing
Race Prep
20
Oct 3, 2015 11:04 AM
The Gleas
MEGAsquirt
3
Oct 1, 2015 09:30 AM




All times are GMT -4. The time now is 12:57 PM.