setting tps in mt config
 

as title says, i am struggling to get my car started on the hybrid alpha n settings, if i go into megatune and calibrate tps i get a value of 24 closed and 231 WOT, now where do i set the tps settings for the ms????
i have gone into configurator and set alpha n instead of speed density.

plz help i am really struggling now.
thanks

can anyone have a look at my msq for me make sure i have not missed something simple. its just annoying the hell outta me now, lol i keep going over the same pages, the same settings and i cannot for the life of me figure out what is wrong. i have done everything that the megamanual says to do and it doesn't work.
if i can email the msq to someone to have a look at i would be very grateful.
thanks

Sorry but I guess I don't understand exactly what the problem is. I assume you went under calibrate TPS and, with your foot off the throttle, you selected "Select this value" for 0%, then with the throttle wide open you select 100%. Now is the gauge in Megatune working? If not, what's it doing?

Ok as arga said, when you calibrate the TPS it just needs to know what value equals 0 throttle and 100% throttle so that it has a reference point to work with. So if you set yours, 0 Throttle will be 24 and wide open will be 231 and it is ok because the megasquirt will see the 24 as 0% and 231 as 100%. Beyond that I dunno if i can help

i cant find a gauge in megatune for tps, or anything else except the calibrate tps in megatune. i cannot find anywhere that asks me to set the tps values.

If you right-click the gauge, you'll see a "Swap to" option that will let you change it to a TPS gauge.

any of the gauges? where is the option to set the tps valuse for 0% and 100%??

Yes you can right-click on any one of the gauges in megatune and pick from a list of like 30 different options of others to "replace" them with.

thanks, got it. but now my battery is dead and car wont start! arrrggghhhh