someone check my spark map ;)
 

How retarded or conservitive am i right now....

Two options:

1. Take a screencap, because nobody is going to want to save your vex file, import the spark map, and then look at it

2. Get on a dyno with det cans and build your own good spark map

Are you driving on it? Full throttle? If so, give us logs. That's the best way to see what's happening.

good point sav ^
I have a mac keyboard I can't use the print screen feature don't have that button :facepalm: also can't dyno yet until I get the new clutch, det cans have been used and seems great no marble/rattling sounds, what have you....
been on it for a while and have found that it's ok.. then I see some other peoples and there pushing a little harder I was mainly just wondering if it's conservative enough to feel safer than I do now ...

I have a mac running bootcamp. For windows xp, I downloaded ScreenPrint 32 - v3.5 and configured it to capture when I press F12. Works great for me.

looks like a fuel map....

VE Table [ 12][ 12]
[ 0] [ 1] [ 2] [ 3] [ 4] [ 5] [ 6] [ 7] [ 8] [ 9] [ 10] [ 11]
[ 0] = 77 77 97 114 125 134 134 134 134 134 134 134
[ 1] = 77 77 97 111 122 131 131 131 131 131 131 131
[ 2] = 77 82 97 108 122 128 128 128 128 128 128 128
[ 3] = 77 85 99 105 114 116 119 122 122 122 122 122
[ 4] = 80 88 105 108 111 114 119 119 119 116 116 116
[ 5] = 80 91 105 108 111 111 114 114 114 114 114 114
[ 6] = 82 94 108 108 111 111 111 114 114 114 114 114
[ 7] = 77 77 80 88 88 88 88 88 91 91 91 91
[ 8] = 68 68 74 80 80 80 80 80 82 82 82 82
[ 9] = 68 68 65 68 68 68 68 68 71 71 71 71
[ 10] = 65 65 54 60 60 60 60 60 62 62 62 62
[ 11] = 62 62 45 48 54 54 54 54 57 57 57 57


;)

Just an FYI, you can capture a specific area by pressing command/apple-shift-4, then highlighting whatever you want to capture... I know this works on a mac, cause that's what I'm using right now :laugh: I guess it would work on yours too?

awesome!! thanks will do when im home