The last time i tried installing MSII i ended up replacing my coil packs and my igniter, about $250 that could have gone to parts... anyhow im ready to try it again, both of those will be disconnected but i still have no idea as far as ignition tuning to turn on my car...

Its a 93 with headers, 2.5 exhaust, and stage two clutch... its been waiting patiently to get boosted but MSII has to be in there first...

can anyone share a file that i can just load and turn on the car after the MSII is installed?

 

I can't help with MSII but it sounds like you had your coil setting inverted incorrectly. What ECU mods are you using for tach input and spark output?
You can use DIYautotunes ignition timeing map, it is pretty conservative and will be just fine with 91 octane.

 

i still havent tuned anything...
the coils didn't fry in actuality but i was sure thats what it was so i bought a new one and car didn't start... so i replaced the igniter and that did it... i was wiring my MS2 and my uncle tried turning on the car without understanding there was no ecu at all... he left the key in the on position and when i connected the stock ecu i heard a click, the it only ran for 2 seconds and died...