Toyota Cop - retune? which settings?
Hello fellow Megasquirters, I recently had a friend make me a toyota cop harness. Now I have a few questions before I start installing it on my car.
" Aftermarket ECU owners: dwell these at 3.5ms cranking, 2.5ms at 12v " 1. Is the 3.5ms cranking on "Crank Settings"? 2. Where (I have tunerstudio & Megalowviewer) and what setting do I put the "2.5ms at 12v"? 3. Any other settings must be changed before starting the vehicle? :vash: |
Stating the semi-obvious, but look under "Spark->Dwell Settings." Those are the only changes you need to make.
|
Originally Posted by hornetball
(Post 1020004)
Stating the semi-obvious, but look under "Spark->Dwell Settings." Those are the only changes you need to make.
|
Also the Dwell battery correction (this thread is to be found in the DIY turbo section imho)
Greets |
Originally Posted by AdoboMiata
(Post 1020013)
This would be for the 3.5ms or 2.5ms?
Dwell battery correction is hard-coded if you have an MS-1 based MSPNP. |
Okay so on tunerstudio,
Dwell control Cranking dwell(ms): 3.5 Running dwell(ms): 2.5? Minimum discharge period(ms): .5 Correct? I only touched cranking and running dwell. Although I haven't saved it yet. |
Delete
|
All times are GMT -4. The time now is 11:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands