Hello fellow Megasquirters, I recently had a friend make me a toyota cop harness. Now I have a few questions before I start installing it on my car.

" Aftermarket ECU owners:

dwell these at 3.5ms cranking, 2.5ms at 12v "

1. Is the 3.5ms cranking on "Crank Settings"?
2. Where (I have tunerstudio & Megalowviewer) and what setting do I put the "2.5ms at 12v"?
3. Any other settings must be changed before starting the vehicle?

 

Stating the semi-obvious, but look under "Spark->Dwell Settings." Those are the only changes you need to make.

 

This would be for the 3.5ms or 2.5ms?

 

Also the Dwell battery correction (this thread is to be found in the DIY turbo section imho)

Greets

 

Both.

Dwell battery correction is hard-coded if you have an MS-1 based MSPNP.

 

Okay so on tunerstudio,

Dwell control
Cranking dwell(ms): 3.5
Running dwell(ms): 2.5?
Minimum discharge period(ms): .5

Correct? I only touched cranking and running dwell. Although I haven't saved it yet.

 

Delete