Hello,

So i just started to do a couple of logs and run them through mlv to be analyzed. im having trouble selecting my wideband. when i open the log file, i then open the .msq file that i logged on. then i hit ve analyzer button. It then shows me on the bottom that narrowband o2 is selected. it shows wideband o2 above it but it wont let me select it. any help as to why this might be would be greatly appreciated. i also set the sensor in the settings.ini file in megatune configurator. here is my most recent log. this is after it has been corrected 2 times. it is running really rich at idle even and i think it is because i had narrowband set as the o2 sensor when analyzing log file.

 

anyone have any idea how to select wideband as the default sensor. i have an innovate lc1.

 

If you haven't already, read this section.

MegaSquirtPNP by DIYAutoTune.com

Has info on wideband selection. For MLV, there is an option to select the LC1 from the dropdown menu, do that.

 

i already have it selected through megatune. i cannot seem to figure out how to select it in mlv to properly tune my map. anyone have any idea?