Weird IAT issue after reflash (MSPNP)
 

so... cops are in and working!
now, here is a problem... i flashed my mspnp for no-afm BUT it wont run on ait... i mean, it shows temps properly but it wont run! works perfectly with afm plugged in...

oh, afr is in low 10s again. wtf?!

Are the AFRs in the 10's with the AFM plugged in and the no-AFM map loaded? If so, it's normal for the AFRs to be off because you have the wrong IAT correction.

What MSQ did you load when you reflashed it for the no-AFM settings?

Looks like it way to rich to run with AIT. make sure you dont crank to much or you may wind up fouling your plugs.

thing is... afm and ait show same temps! and i re-flashed it twice. also, it wont idle leaner then low 10s afr.

Have you checked the configurator?

yeap... all is good :/

im thinking that i have wrong firmware...

:noob::bang:

hey... it was on cd that came with my mspnp!

so i re-flashed again now with hi-res firmware and still wont fucking work with ait!!! wtf?!

Please email me your MSQ file and I'll take a look. Also, do you have a data log of it cranking / idling, however poorly?

sure matt. will do that tonight.

so... i tried 2 more sensors and no luck. shows 43* when nothing is connected. 10* difference between iat and maf. i still need to grab that laptop and send those logs to matt...