UrbanSoot

iTrader: (24)

so... cops are in and working!
now, here is a problem... i flashed my mspnp for no-afm BUT it wont run on ait... i mean, it shows temps properly but it wont run! works perfectly with afm plugged in...

oh, afr is in low 10s again. wtf?!

Matt Cramer

Are the AFRs in the 10's with the AFM plugged in and the no-AFM map loaded? If so, it's normal for the AFRs to be off because you have the wrong IAT correction.

What MSQ did you load when you reflashed it for the no-AFM settings?

Saml01

iTrader: (9)

Looks like it way to rich to run with AIT. make sure you dont crank to much or you may wind up fouling your plugs.

UrbanSoot

iTrader: (24)

thing is... afm and ait show same temps! and i re-flashed it twice. also, it wont idle leaner then low 10s afr.

Saml01

iTrader: (9)

Have you checked the configurator?

UrbanSoot

iTrader: (24)

yeap... all is good :/

UrbanSoot

iTrader: (24)

im thinking that i have wrong firmware...

Braineack

iTrader: (62)

UrbanSoot

iTrader: (24)

hey... it was on cd that came with my mspnp!

UrbanSoot

iTrader: (24)

so i re-flashed again now with hi-res firmware and still wont ******* work with ait!!! wtf?!

Matt Cramer

Please email me your MSQ file and I'll take a look. Also, do you have a data log of it cranking / idling, however poorly?

UrbanSoot

iTrader: (24)

sure matt. will do that tonight.

UrbanSoot

iTrader: (24)

so... i tried 2 more sensors and no luck. shows 43* when nothing is connected. 10* difference between iat and maf. i still need to grab that laptop and send those logs to matt...