What value bias resistor to use with a GM oil temp sensor?
Thread Starter
Junior Member
Joined: Jul 2016
Posts: 99
Total Cats: 17
What value bias resistor to use with a GM oil temp sensor?
Hi folks,
I have the GM oil temp sensor (from diyautotune) with a 3K bias resistor going in to analogue input 1 of my MS3Pro PnP in a 99 NB. I have been trying to calibrate it using hot 86 C and cold 12C water and a mercury thermometer. And am using the "GM" curve in Tuner Studio.
Trouble is, I can line up the cold end to within 1 degree, but then the hot end will be anywhere between 6 to 15 degrees out - or - I line up the hot end, but the cold end is out by 6-10 degrees.
The only thing I can think of is my bias resistor is wrong. Does anyone happen to know what the bias resistor value should be for a GM oil temp sensor?
I have the GM oil temp sensor (from diyautotune) with a 3K bias resistor going in to analogue input 1 of my MS3Pro PnP in a 99 NB. I have been trying to calibrate it using hot 86 C and cold 12C water and a mercury thermometer. And am using the "GM" curve in Tuner Studio.
Trouble is, I can line up the cold end to within 1 degree, but then the hot end will be anywhere between 6 to 15 degrees out - or - I line up the hot end, but the cold end is out by 6-10 degrees.
The only thing I can think of is my bias resistor is wrong. Does anyone happen to know what the bias resistor value should be for a GM oil temp sensor?
Reply
0
0
Junior Member
Joined: Mar 2018
Posts: 476
Total Cats: 28
From: MS Gulf Coast
My phone is being screwy and won't let me paste to into MT.net
On diyautotune page for the sensor it mentions in the FAQS about a three point calibration and list resistance values... not sure if that's what you need or not. Looks like a setting you have to input via TS.
On diyautotune page for the sensor it mentions in the FAQS about a three point calibration and list resistance values... not sure if that's what you need or not. Looks like a setting you have to input via TS.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
