|
Where can I find the center connector for the MSPNP?
I have a busted-ass '92 to swipe parts from, but I can't find the center connector. I want to hook up the KnocksenseMS and the LC-1 before I start the car next week.
|
i've never got to post an rtfm post before but...
Pin Number Connection 1 through 8 Breakout header 9 Electronic boost control 10 Alternate O2 Sensor Input (for wideband o2) 11 Input for KnockSenseMS knock box 12 Launch Control Input 13 Clutch Switch connection for launch control 14 through 16 Not Used Section four provides information on wiring up pins 1 through 8. Note that this middle connector is unfortunately not yet available to us to include in the initial MSPNP shipments—we’ll be knocking $20 off the retail price to accommodate for this until we can stock them which we are working on. Until then, you should be able to grab this from MANY junkyard Mazda’s from around the same era (90-2002ish). You’re looking for the 18pin wiring harness connector, and you want to cut it off with some wire attached that you can tap onto. We have these on order and will have them as soon as possible—it’s all about the lead-times… |
I know what the pins do, but I can't find the actual connector on my parts car. The manual says you can get one off any 90-02 Mazda, but I can't find one in any obvious place on my wrecked '92.
|
not miata... mazda
it would have been nice if he gave more information the the right cars to source this part from but try a 323/protege or 626. |
Well shit. How much would the connector cost bare from a dealer?
|
You can buy it from boomslang too. Or that onlinecomponents store. Do a search for '99 PNP harness on here, there was a thread with a couple stores that sell them.
DIY might carry them? |
I read something somewhere that said the connector did not go out with the first batch of kits, but its going to be / is available...I need one too. I'd rather just fucking buy on for $10, rather than go trolling though a junk yard or buying one online that may be the right one.
found it: Note that this middle connector is unfortunately not yet available to us to include in the initial MSPNP shipments—we’ll be knocking $20 off the retail price to accommodate for this until we can stock them which we are working on. Until then, you should be able to grab this from MANY junkyard Mazda’s from around the same era (90-2002ish). You’re looking for the 18pin wiring harness connector, and you want to cut it off with some wire attached that you can tap onto. We have these on order and will have them as soon as possible—it’s all about the lead-times… I need to hook my shit up soon, maybe this weekend. This shit is hard to do in a hotel parking lot though. Where are you hooking up the knock sensor? |
I remember seeing a tutorial about a bolt under the intake manifold that's good to use.
|
I have a complete 2000 wiring harness I use for spare wires and stuff... If you can post pics of what the connector looks like I can see if it's on my harness.
-Mike |
I have a couple extra ECU connectors both male and female, post a pic of what you need.
|
Originally Posted by iWeasel410
(Post 125856)
I have a couple extra ECU connectors both male and female, post a pic of what you need.
|
Originally Posted by Savington
(Post 125612)
I remember seeing a tutorial about a bolt under the intake manifold that's good to use.
|
Originally Posted by reddroptop
(Post 125895)
Do you have the ECU side connector(s) (female) from a 94-95?
|
Originally Posted by hustler
(Post 125935)
Thanks. I've seen many people weld a bolt to the engine mount...but I don't have a mig in the hotel.
... but i bet it gets kinda old too |
96+ Miata's have them-- it's the 16pin connector (used in the middle). We've got them on order but we're still waiting. The pins have come in but the connectors aren't here yet...
|
Originally Posted by akaryrye
(Post 126145)
you live in a hotel? thats awesome!
... but i bet it gets kinda old too I've been home 9 days ince October 6th, 2006. I left for Katrina on 9/4/05 and I've been home what I estimate to be 36 days since then. I'm so fucking ready to order a 60" hdtv and sit on my ass to use tivo with my dog for a couple weeks. |
FYI, my 2000 wiring harness appears to only have 2 connectors, the same 2 as the 94.
-Mike |
| All times are GMT -4. The time now is 05:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands