|
Originally Posted by ZX-Tex
(Post 445295)
Standing by to see how it works for you. Fingers crossed.
Funny that Labonte does not advertise it as a PWM solenoid though the evo thread (?) indicates that it is. I think Labonte just uses it as an on-off only, in place of a check valve, to reduce back pressure. Their high-end 3D map controller still uses PWM on the pump motor judging by their diagram. |
Got the mouse valve hooked up. It's so small. It's about the size of a 20 oz bottle cap. Seems to be stopping the flow.
|
so it is impeding your flow and not working?
|
Sorry, seems to be stopping the flow when not powered up. AKA seems to b working fine. Just realize that the flow rating may not be the best for someone wiht power.
|
nah the flow rate is pretty decent and this seems like a nice solution by all means take your time and get some real answers for us. As i might try this myself if it shows merit.
|
My real answer will come when I get the chance to boost - brake. I had my last setup with about 2 feet of hose after the check valve. It would cause a stumble if I had to get into boost to merge, then have the obligatory grandma in the white kei truck slam on the brakes because the road got a little smaller, or whatever random reason there was.
|
No stumbling so far. Been trying to make it happen, but it won't. So far I have nothing bad to say about it. It's SS, so it should last a while.
|
what kinda sealing method does it use?
|
magna, what do you mean sealing? Connectors?
|
i mean how does it stop the flow is it designed with a viton seal does the stainless just fit that tightlly together etc. Or is it set up with an internal coil like a fuel injector.
|
Aquamist (Water injection) questions and answers here... - Page 93 - NASIOC
I honestly don't know what it is made of. I kind just went for the cheap purchase. You can read about it some on that page. |
|
| All times are GMT -4. The time now is 05:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands