Sorting out DIY install
 

Starting to sort out the DIY install on the NB I picked up a few weeks ago. It hasn't worked since I bought it.

Debating if it is worth it to buy something like the vc-30 controller for $150 and installing it to get rid of the current wiring/relay/boost sensor that are shit, and then just reusing the reservoir, pump, and possibly the solenoid( if it works). Or to replace all the wiring and begin diagnosing the issues further. I am leaning towards the vc-30 for the added control and ease of wiring myself but not sure if it's worth it for the price compared to just replacing the other parts for probably less than $50. So is the controller worth it or not needed for low boost setup? I plan on using the system on future turbo or engine as well.

Also looking at getting a new nozzle as not sure what size it currently has. I only make 7psi on the m45 so I'm thinking the 60ml nozzle would be the best fit, however I'm not sure what size I should use pre blower if I decide to run one there maybe a 31ml? or would it then be better to use the 31 pre blower and then a 31 at the dummy throttle body? Will be using a 50/50 mix.

Thanks for the input.