~ Turbo Miata part out in so.FL ~
 

ALL local buyers welcome - i prefer local sale of parts before shipping parts around the country, of course if there aren't any local buyers for said parts, i will ship any/all parts.

All parts have less than 2000 miles on them (if otherwise specified)

this motor makes 340 whp and is tuned very conservatively, it was built to hold upwards of 550whp
you can check out videos of how it runs on youtube: robinorobino

http://robinorobino.smugmug.com/Othe...9_eUZKV-X2.jpg

2.0L Long Block (1.8 bored/stroked)
- ARP studs
- JE 9:1 forged pistons
- H beam forged rods
- Billet oil pump gears - High volume oil pump
- Relocated oil filter setup
- Mazdaspeed motor mounts
-----------------------------
'99 Head (ported/polished)
- high revving valve springs
- new valves
- stock cams
- Adjustable cam gears

$4450


http://robinorobino.smugmug.com/Othe...73_vYttm-O.jpg




Mazdaspeed 6 speed transmission (had 4000 miles when i bought it - now has less than 6000 miles on it)
- shifter w/Voodoo knob
- ACT heaviest duty clutch/pressure plate assembly
- Mazdaspeed tranny mounts

$1050 or $850 for just the tranny alone



Garrett GT3071 Turbo
-ceramic coated

$900


Stainless steel exhaust manifold
- heat wrapped
- 2 support beams welded from flange to flange
- milled head flange for straightness

$350


Turbo back custom exhaust
-3" mandrel bent/pie cut
-flex piece at turbo
-Borla straight through muffler

$500


http://i3.photobucket.com/albums/y87/zremy/059.jpg





Modified Intake Manifold
- Honda Edelbrock Jr. intake cut/welded/finished onto Mazda flange

$325


Tial wastegate

$175

Tial blowoff valve

$175


RC750 injectors

$200



Vishnu fuel rail

$100



UPRIGHT intercooler (painted flat black)
'Over the Top' design allows airflow to the radiator & shortest piping routing for fastest boost
comes with piping, silicone hoses/reducers/T-clamps

$250


http://robinorobino.smugmug.com/Othe...0_bahMS-X2.jpg



Koyo aluminum radiator
-with twin slim fans

$200


Oil dump can with hose/ends

$50


Mustang 60mm throttle body

$75



Air conditioning - JUST Rebuilt
-Compressor
-Condenser

$200


http://robinorobino.smugmug.com/Othe...6_dWMTV-XL.jpg

Stock rear axle (all rebuilt)
- .363 gears
- Mazdaspeed mounts

$450


Tanabe Gold Sustec Pro coilovers
-with helper springs

$700

http://robinorobino.smugmug.com/Othe...18_epaMy-O.jpg


Wilwood Big Brake Kit
-front & rear Two piece rotors
-front 4 piston Wilwood Calipers
-rear stock calipers
-front & rear stainless brake lines
-semi metalic brake pads
-mounting brackets

$900 (this is the $1789 bbk at 949racing)


http://robinorobino.smugmug.com/Othe...03_v5Yxw-O.jpg


Tubular Racing beat front sway bar
-with adj. endlinks
-bushings
-stock rear sway bar w/links

$100


http://robinorobino.smugmug.com/Othe...25_zLpwU-O.jpg

949 6UL 2nd Generation 15x9" silver/polished lip wheels
-forged alloy lugs - centering rings
-225/45/15 Hankook RS3 tires
-balanced to less than 8 lbs road force each

$1000


http://robinorobino.smugmug.com/Othe...00_cPe3y-O.jpg


Hard Dog roll bar

$275

http://robinorobino.smugmug.com/Othe...25_G8Wws-O.jpg



Pioneer system with Navigation

$250


http://robinorobino.smugmug.com/Othe...6_8CQpu-X2.jpg


Sparco Ring steering wheel/with hub

$100



AEM digi boost gauge

$150


AEM digi Wideband gauge

$150



Apexi AVC-R digi boost controller

$350


http://i3.photobucket.com/albums/y87/zremy/055.jpg


Electromotive Tec3R management system
-Electromotive 3R coils
(need to find someone who can remove it properly first)

$1300


http://robinorobino.smugmug.com/Othe...96_Kw57m-O.jpg

Full factory black interior in exc. condition
-door panels
-carpeting
-mats
-seats
-complete dash/gauges/heat controlls
-console
-kick panels

$500


http://robinorobino.smugmug.com/Othe...61_k25Cv-O.jpg


Rolling 1996 chassis with clean FL title in exc. condition

$1500


http://robinorobino.smugmug.com/Othe...86_cKuRe-O.jpg


*** This is a preliminary list
I will have photos of all items and other things will be added to the list soon.

I prefer local buyers who can pick up parts, but will ship if there aren't any.
Shipping is extra.

I won't be able to start parting out until the first or second week of Nov. so you have plenty of time to come see what you need.
I'm in north palm beach FL and available most anytime.

Damn..

Would you sell me the front bumper. With front lip and intakes? Up in Gainesville.

i would sell anything to anyone who can drive down to get it

pickup parts takes priority over everything else.
if i can save the time wrapping/boxing/shipping, i will.

both turn signal air duct?and the heat shield, i pay shipping+fees+a beer

Interested in the diff if you don't get a local buyer.

I wish I was local....

In for the intercooler setup when your ready to ship. Do you have any pics of the intercooler itself.

the car is still in one piece.
as mentioned in the last part of the post, i will get around to dismantling towards the middle of the month, until then i have no pics of parts taken off, the car is still being driven daily.

Um pass on the motor. If I can get that roll bar to fit my MSM somehow ill be all over it

Are NA radiators universal (ie, not year specific)? If so, I'd be interested in the Koyo rad with fans, shipped to Ridgeland MS.

Very interested in the steering wheel, LMK if you will ship to 98059.

interested in the tial EWG. Which model is it?

If the intercooler setup isn't sold yet I can buy it right now, along with that rollbar if it fits newer glass back tops.Money waiting. Thanks

I am local.

Interested in the motor mounts and the gauge cluster hood. Possibly also the radiator/fans.

I will drive down from Tampa for the rollbar when you get to that point. I am very sorry to see you couldn't sell it complete. It is a beautiful car.

Damn, I kept hoping that this day wouldn't come. Many times I wished that I would have bought this car over building my own, for a hell of a lot more cash than Rob was selling this one for.

mmmmhhhh that intake mani + TB + vishnu would be nice I'll keep in touch!!!!!

I will take the radiator and the wheel/hub assembly. I am local and have cash ready to go.

Question about your plug wires! where did you get them? and is there a part number on it?

i would be interested in the coils and plugwires when you get to the point of shipping.

Will you sell the Mazdaspeed 6 speed transmission on it's own? I don't need a clutch/pp. How much for just that?

Also, how much work was required to get your IM to fit? Would an ABS module get in the way you think?