~ Turbo Miata part out in so.FL ~
ALL local buyers welcome - i prefer local sale of parts before shipping parts around the country, of course if there aren't any local buyers for said parts, i will ship any/all parts.
All parts have less than 2000 miles on them (if otherwise specified) this motor makes 340 whp and is tuned very conservatively, it was built to hold upwards of 550whp you can check out videos of how it runs on youtube: robinorobino http://robinorobino.smugmug.com/Othe...9_eUZKV-X2.jpg 2.0L Long Block (1.8 bored/stroked) - ARP studs - JE 9:1 forged pistons - H beam forged rods - Billet oil pump gears - High volume oil pump - Relocated oil filter setup - Mazdaspeed motor mounts ----------------------------- '99 Head (ported/polished) - high revving valve springs - new valves - stock cams - Adjustable cam gears $4450 http://robinorobino.smugmug.com/Othe...73_vYttm-O.jpg Mazdaspeed 6 speed transmission (had 4000 miles when i bought it - now has less than 6000 miles on it) - shifter w/Voodoo knob - ACT heaviest duty clutch/pressure plate assembly - Mazdaspeed tranny mounts $1050 or $850 for just the tranny alone Garrett GT3071 Turbo -ceramic coated $900 Stainless steel exhaust manifold - heat wrapped - 2 support beams welded from flange to flange - milled head flange for straightness $350 Turbo back custom exhaust -3" mandrel bent/pie cut -flex piece at turbo -Borla straight through muffler $500 http://i3.photobucket.com/albums/y87/zremy/059.jpg Modified Intake Manifold - Honda Edelbrock Jr. intake cut/welded/finished onto Mazda flange $325 Tial wastegate $175 Tial blowoff valve $175 RC750 injectors $200 Vishnu fuel rail $100 UPRIGHT intercooler (painted flat black) 'Over the Top' design allows airflow to the radiator & shortest piping routing for fastest boost comes with piping, silicone hoses/reducers/T-clamps $250 http://robinorobino.smugmug.com/Othe...0_bahMS-X2.jpg Koyo aluminum radiator -with twin slim fans $200 Oil dump can with hose/ends $50 Mustang 60mm throttle body $75 Air conditioning - JUST Rebuilt -Compressor -Condenser $200 http://robinorobino.smugmug.com/Othe...6_dWMTV-XL.jpg Stock rear axle (all rebuilt) - .363 gears - Mazdaspeed mounts $450 Tanabe Gold Sustec Pro coilovers -with helper springs $700 http://robinorobino.smugmug.com/Othe...18_epaMy-O.jpg Wilwood Big Brake Kit -front & rear Two piece rotors -front 4 piston Wilwood Calipers -rear stock calipers -front & rear stainless brake lines -semi metalic brake pads -mounting brackets $900 (this is the $1789 bbk at 949racing) http://robinorobino.smugmug.com/Othe...03_v5Yxw-O.jpg Tubular Racing beat front sway bar -with adj. endlinks -bushings -stock rear sway bar w/links $100 http://robinorobino.smugmug.com/Othe...25_zLpwU-O.jpg 949 6UL 2nd Generation 15x9" silver/polished lip wheels -forged alloy lugs - centering rings -225/45/15 Hankook RS3 tires -balanced to less than 8 lbs road force each $1000 http://robinorobino.smugmug.com/Othe...00_cPe3y-O.jpg Hard Dog roll bar $275 http://robinorobino.smugmug.com/Othe...25_G8Wws-O.jpg Pioneer system with Navigation $250 http://robinorobino.smugmug.com/Othe...6_8CQpu-X2.jpg Sparco Ring steering wheel/with hub $100 AEM digi boost gauge $150 AEM digi Wideband gauge $150 Apexi AVC-R digi boost controller $350 http://i3.photobucket.com/albums/y87/zremy/055.jpg Electromotive Tec3R management system -Electromotive 3R coils (need to find someone who can remove it properly first) $1300 http://robinorobino.smugmug.com/Othe...96_Kw57m-O.jpg Full factory black interior in exc. condition -door panels -carpeting -mats -seats -complete dash/gauges/heat controlls -console -kick panels $500 http://robinorobino.smugmug.com/Othe...61_k25Cv-O.jpg Rolling 1996 chassis with clean FL title in exc. condition $1500 http://robinorobino.smugmug.com/Othe...86_cKuRe-O.jpg *** This is a preliminary list I will have photos of all items and other things will be added to the list soon. I prefer local buyers who can pick up parts, but will ship if there aren't any. Shipping is extra. I won't be able to start parting out until the first or second week of Nov. so you have plenty of time to come see what you need. I'm in north palm beach FL and available most anytime. |
Damn..
Would you sell me the front bumper. With front lip and intakes? Up in Gainesville. |
i would sell anything to anyone who can drive down to get it
pickup parts takes priority over everything else. if i can save the time wrapping/boxing/shipping, i will. |
both turn signal air duct?and the heat shield, i pay shipping+fees+a beer
|
Interested in the diff if you don't get a local buyer.
|
I wish I was local....
|
In for the intercooler setup when your ready to ship. Do you have any pics of the intercooler itself.
|
the car is still in one piece.
as mentioned in the last part of the post, i will get around to dismantling towards the middle of the month, until then i have no pics of parts taken off, the car is still being driven daily. |
Um pass on the motor. If I can get that roll bar to fit my MSM somehow ill be all over it
|
Are NA radiators universal (ie, not year specific)? If so, I'd be interested in the Koyo rad with fans, shipped to Ridgeland MS.
|
Very interested in the steering wheel, LMK if you will ship to 98059.
|
interested in the tial EWG. Which model is it?
|
If the intercooler setup isn't sold yet I can buy it right now, along with that rollbar if it fits newer glass back tops.Money waiting. Thanks
|
I am local.
Interested in the motor mounts and the gauge cluster hood. Possibly also the radiator/fans. |
I will drive down from Tampa for the rollbar when you get to that point. I am very sorry to see you couldn't sell it complete. It is a beautiful car.
|
Damn, I kept hoping that this day wouldn't come. Many times I wished that I would have bought this car over building my own, for a hell of a lot more cash than Rob was selling this one for.
|
mmmmhhhh that intake mani + TB + vishnu would be nice I'll keep in touch!!!!!
|
I will take the radiator and the wheel/hub assembly. I am local and have cash ready to go.
|
Question about your plug wires! where did you get them? and is there a part number on it?
i would be interested in the coils and plugwires when you get to the point of shipping. |
Will you sell the Mazdaspeed 6 speed transmission on it's own? I don't need a clutch/pp. How much for just that?
Also, how much work was required to get your IM to fit? Would an ABS module get in the way you think? |
$900 tranny alone
coils are Electromotive and will go with the management system together/not separate. wires, i forget, i know they were custom ordered for length and cost me about $100 for the 4 of them. don't understand the IM fitment question |
pm sent
|
Interested in the wheels/tires shipped to 14305. Email me if your willing to ship: jahoo5 at hotmail
|
I want the coilovers please. I'm not local but please give me first crack if no one local takes them. I really appreciate it.
|
I am seriously interested for the intake manifold and the throttle body
If you decide to ship them please pm me |
also interested in the intake manifold and throttle body.
Thanks! |
interested in the wheels and tires. How much life left on the rs3s? shipping to 94080?
|
tires are 90%...
they only spin when you step on the throttle, lol as i mentioned in the first post, it will be until early next week when i start disassembly...but keep the want posts coming so i know who's who. |
my car will never be this clean. ever.
|
Hello im local i was wanting to see if you can give me a number to contact you about a couple of the items you have for sale of pm me and ill give you my number Thanks Ray (The other miata running the 3071 in palm beach)
|
i may have a buyer for your injectors can i have a priced shipped to 23061?
|
|
could u pm me a price for the whole car as is?
|
no big mystery my friend... $12,000 takes it.
in fact i'm supposed to show it on sat. to someone, we'll see what happens. My garage won't free up until monday or tue. (i have a TON of marble flooring and no room to dismantle until it's gone)... So you got till Mon/Tue to make up your mind. Even if i lower the price of the motor to $3900 (2.0 bored stroked built bottom end, billet oilpump gears, studded, ported&polished head cam gears, rebuilt valvetrain with high revv springs) even if i lower prices on the turbo, the tranny the rear etc...there's a slew of people waiting for half the parts already, i still make $15,000++ on the package by parting it...so 12,000 is a GIFT considering it's an ASSEMBLED and FINE TUNED MACHINE that can be driven anywhere RIGHT NOW. A rust free exc condition clean title (i'm the second owner have had the car over 5 years) car has every amenity except power steering. Any other questions, just email. |
What about that tial EWG and BOV? Model and pics? Thanks! Im interested.
|
steering wheel and hub gone?
|
fellas...nothing is gone yet...
car is still in one piece...soon it will come apart i will know more about specific model of parts like the WG/BOV once they are out, it's been a while since i bought them and don't remember everything off the top of my head. keep writing with what you want and i will go post by post and reply to you all once it comes apart. |
Cool, thanks for the update
|
I'm sitting in my garage with air wrench in hand and i got stage fright...
I can't get myself to do it... |
Don't do ettttt!!!!!
|
swear, i've sat here for an hour almost and just can't see myself wrenching it apart, it would go against everything i've worked for on this thing, and even though i know i can make a few grand more doing it, it's the principle of it...that i'm fighting against. Yesterday i drove the car all day, shopping for groceries, checked out a car show, etc...
it would be bad juju and worse karma for me to disassemble it i think if someone showed up with $11,500 right now i would give. |
Not that I want to torture you any more than you are already torturing yourself, but I would like some more information on the radio please. I am local to the Ft. Lauderdale area and would be able to pick it up from you. Can you please give me the model number. Thanks.
|
Let me know if you still want to part with steering wheel + hub and roll bar. Im local
|
keep me on the list of 6ul. shpping to 94080
|
Still have the steering wheel and hub available ? thanks
|
Price for just the head? Let me know if your willing to separate. Thanks
|
price on that little heatshield you have for the brake master cylinder?
oil filter relocate kit as well? give you a hard top for those 6ULs :x: |
I feel for you man. Timing really sucks. I paid 11000 for a turbo miata here in cali with not even a quarter of the stuff you have on this car a month ago. I would have flown out there in a heartbeat and bought yours for what you are asking. It would be a total shame to part this amazing machine out. Just put it in storage. You will be way happier with your decision in the long run. There are plenty of parts I would love off this car but I would rather see it stay intact. Good luck either way man. Just had to put my two cents in.
|
I would probably buy this for $11.5k, but what would I do with my NB. Damnit.
|
Originally Posted by dgmorr
(Post 656000)
I would probably buy this for $11.5k, but what would I do with my NB. Damnit.
|
Whats the absolute lowest youll go on the wheels, brakes and coilovers? I live in Miami so I can pick it up if the deal is too good to pass up. Cant PM due to post count so just reply or email me. Franky69er2@hotmail.com
|
Are you still parting this out? I'm interested in a few pieces.
|
if you wait a year, I would probably have enough money to buy that.
|
Originally Posted by x8mrxjohn8x
(Post 656420)
if you wait a year, I would probably have enough money to buy that.
|
Originally Posted by y8s
(Post 656466)
his for sale thread went up a year ago. dont be an asshole.
i would have probably sold it a year ago if it was priced at $11,500 like it is now... i've turned down 2 offers of 11K in this past year. |
We talked before. I am working feverishly to get my brother in Atlanta to buy this thing. He has cash. He is about to pull trigger on a new SLK (SL-GAY) so I am fighting an uphill battle here. BUT I am trying m8, this car deserves to LIVE!
|
Originally Posted by BAHKACK
(Post 656661)
We talked before. I am working feverishly to get my brother in Atlanta to buy this thing. He has cash. He is about to pull trigger on a new SLK (SL-GAY) so I am fighting an uphill battle here. BUT I am trying m8, this car deserves to LIVE!
|
I would love to have many parts here. I agree, put it away or sell the whole thing. It would be a shame otherwise.
|
Interested Pioneer system with Navigation let me khow, ship to CA 92708 send me email to craps10@hotmail.com. Thanks
|
if you just sold the head lmk i need one. Bump for good stuff
|
All times are GMT -4. The time now is 02:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands