01 LS part out. Now with 200% more race car parts
 

So Mobius' car is at my garage, and needs to be gone. We're slowly chopping off the damaged front and rear, but we're quickly getting to the interior portion which is still full of parts!

Let me know if there's anything you need from an NB2. No transmission, diff, engine, brakes, suspension, MS, or nifty race parts are for sale, they will all go into his next chassis.

But we do have tan carpet, tan soft top, tan seats, steering wheel, dash, lots of wiring components, doors, etc.

So far we've figured out the big stuff:

Seats: Good shape, driver obviously has a little more wear, passenger is in great shape. $150.

Carpets: $200+shipping

Softop: hoping not to ship, good shape glass window with defrost, 2 small pin hole leaks on either side, a piece of gorilla tape on the inside make them invisible and doesn't leak. $200.

Gauges: stock with 1xx,xxx miles. $75+shipping

Let me know what you need, and I'll give you a price.

Pics:

https://www.miataturbo.net/attachmen...ine=1430960383

https://www.miataturbo.net/attachmen...ine=1430960383

Again, roll bar not for sale!

Window switch??

We have one yes, I'm fairly certain it's for sale, seeing as those any donor car he buys should come with one.

Great, thanks. How about that little cap that covers the windshield wiper bolt?

Got one of those too, yup

Excellent, can you PM me some $ figures

Any of the bumper ducting/air damn stuff?

All toast, sorry.

Special edition badges on front fenders available?

Hmm, maybe I should clarify. This is not an '02 special edition with wood and badges and spiffy seats. It's an '01 se, which meant 16" wheels, sport brakes, 3.9 Torsen, and 6 speed. None of which are for sale.

I also have an 01 SE and it does have front fender badges and wood. Mobius's didnt?

01 se should have badges on front fenders (I think all special edition miatas have some form of these) and wood steering wheel, e-brake handle, shift knob, and dash trim. The 16" wheels should be chrome if original too. I looked in his build thread and its hard to tell but is his car an emerald green 01 ls maybe? I think the tan color is different from SE to LS cars so it might be worth clarifying for anyone interested in any of the tan interior bits.

Ah, LS is the term I was looking for. I knew it had a S in there somewhere.

Pics of the interior added! And title changed to 01 LS part out. Sorry.

Sent pm re: steering wheel.

Unless he buys a donor like mine, but I wouldn't exactly recommend that.

Good luck with all this. I can't wait to see what he builds next, but I know I've got a long wait ahead of me.

Steering wheel and window switch gone, let me know what else you need!

Passenger side seat sliders? To 94118.

Dammit giant post with new parts deleted! I'll make this breif and add more pics and descriptions later.

As the Mobius part out continues to evolve, Richard starts making decisions about what he wants to keep and what he wants to sell. What this means is that I get to add race car parts to the list!

First are his two good nickel gen 3 15x9 6uls with 225/45 Maxxis RC-1s mounted and balanced. You can still see the word "Maxxis" on the tread. $575 shipped. New they're $626+shipping+mount/balance. That's over 20% savings from new.

Next is most of his 1st gen TSE 11.75 brake kit. Calipers and brake lines are NOT included. But 4 hats, 4 rotors, brackets, TSE 5mm spacers and ebay 3mm spacers are included. All 4 hats are used, 2 rotors are brand new, 2 have the same wear as the tires above. All 4 are safety wired. New thats $375+$100(safety wire x4)+$250(x2 hats)+62(x2 rotors), $10 for ebay spacers(lol). So just under $800+shipping new. I'd like $650 shipped.

Would you sell just one 6UL (don't care with or without tire)? Would like to have a spare.

Only if they don't go as a set. We're a ways away from even removing the tires, much less seperating the wheels. Emilio says the 4th gen nickel is very close, I'm hoping people will realize they could have a 15x9 225/45 r-comp setup that's nearly new for $1325 instead of $1500.

That's fine, I could take it with a tire if you decide to separate. Just LMK. If not then no biggie. I certainly don't need 3 of them.

If he happens to decide to sell that rollbar cover... I'm interested

Do you have the tail lights?

I have the driver side, and the passenger wiring harness for a nb1-nb2 rail light conversion.

Are you willing to separate the passenger sliders from the seat?

Not at this point.

Brakes, ducts, and rotors moved to another thread:

https://www.miataturbo.net/miata-par...s-ducts-84343/

I'll try to keep this thread for the stock parts.

I'll also get pictures up eventually of many things in many threads, and I'll make another thread for the two 15x9 nickel 6uls with practically new RC-1s. Soon.

Wait, two 6ULs? What happened to the third?

What third do you keep talking about??? Entire passenger side of the car car was scrapped except brakes.

:facepalm:

Reading comprehension fail. The first time I read your post I saw gen 3 and just read "3 15x9 6ul with maxxis... "

Hur dur. OK.

I could use the seatbelt bolt covers if you have them and the wiper bolt covers if the other member didn't grab them.

Any chance Mobius still has a 4-rib 80mm Rotrex pulley???? I'm guessing you guys are keeping all that...

Correct. Keeping all that.

Here's some pics of the current state of the car. Actually it's completely stripped now, but this was yesterday before I did that.

heater box with a good heater core...

https://www.miataturbo.net/attachmen...ine=1431700613

blower motor, dash

https://www.miataturbo.net/attachmen...ine=1431700613

This is the trunk molding and windshield molding, both removed perfectly intact. They're going in the trash asap, they're constantly in my way.

https://www.miataturbo.net/attachmen...ine=1431700613

Not really much for sale in this picture. The engine harness is not for sale, the chassis harness and battery harness were removed intact, and are for sale.

https://www.miataturbo.net/attachmen...ine=1431700613

Here we have the bose single din radio, non-ac cross over tube, and gauges.

https://www.miataturbo.net/attachmen...ine=1431700613

Lastly a bunch of interior plastic pieces. Nothing interesting, but if you need a piece, I have it. Below these plastic pieces is the glass window soft top in ok condition. Rain rail has a crack, but it worked otherwise. Latches not included.

https://www.miataturbo.net/attachmen...ine=1431700613

Will take non-ac crossover tube. If it fits an NA.

Also, brakes posted here:

https://www.miataturbo.net/miata-par...ow-pics-84343/

wheels posted here:

https://www.miataturbo.net/miata-par...7/#post1231629

They are the same, AFAIK. Let me know the next time you're up here.

Will be up on thursday for other things. I'll stop by for the abs sensor and crossover tube.

I'm interested in the tan center console.

You have a PM good sir.

Window switch and wiper bolt cover arrived at my place in Canada yesterday. Swapped the tan switch housing for my black housing and it works great.

Thanks.