So Mobius' car is at my garage, and needs to be gone. We're slowly chopping off the damaged front and rear, but we're quickly getting to the interior portion which is still full of parts!

Let me know if there's anything you need from an NB2. No transmission, diff, engine, brakes, suspension, MS, or nifty race parts are for sale, they will all go into his next chassis.

But we do have tan carpet, tan soft top, tan seats, steering wheel, dash, lots of wiring components, doors, etc.

So far we've figured out the big stuff:

Seats: Good shape, driver obviously has a little more wear, passenger is in great shape. $150.

Carpets: $200+shipping

Softop: hoping not to ship, good shape glass window with defrost, 2 small pin hole leaks on either side, a piece of gorilla tape on the inside make them invisible and doesn't leak. $200.

Gauges: stock with 1xx,xxx miles. $75+shipping

Let me know what you need, and I'll give you a price.

Pics:





Again, roll bar not for sale!

 

Window switch??

 

We have one yes, I'm fairly certain it's for sale, seeing as those any donor car he buys should come with one.

 

Great, thanks. How about that little cap that covers the windshield wiper bolt?

 

Got one of those too, yup

 

Excellent, can you PM me some $ figures

 

Any of the bumper ducting/air damn stuff?

 

All toast, sorry.

 

Special edition badges on front fenders available?

 

Hmm, maybe I should clarify. This is not an '02 special edition with wood and badges and spiffy seats. It's an '01 se, which meant 16" wheels, sport brakes, 3.9 Torsen, and 6 speed. None of which are for sale.

 

I also have an 01 SE and it does have front fender badges and wood. Mobius's didnt?

 

01 se should have badges on front fenders (I think all special edition miatas have some form of these) and wood steering wheel, e-brake handle, shift ****, and dash trim. The 16" wheels should be chrome if original too. I looked in his build thread and its hard to tell but is his car an emerald green 01 ls maybe? I think the tan color is different from SE to LS cars so it might be worth clarifying for anyone interested in any of the tan interior bits.

 

Ah, LS is the term I was looking for. I knew it had a S in there somewhere.

 

Pics of the interior added! And title changed to 01 LS part out. Sorry.

 

Sent pm re: steering wheel.

 

Unless he buys a donor like mine, but I wouldn't exactly recommend that.

Good luck with all this. I can't wait to see what he builds next, but I know I've got a long wait ahead of me.

 

Steering wheel and window switch gone, let me know what else you need!

 

Passenger side seat sliders? To 94118.

 

Dammit giant post with new parts deleted! I'll make this breif and add more pics and descriptions later.

As the Mobius part out continues to evolve, Richard starts making decisions about what he wants to keep and what he wants to sell. What this means is that I get to add race car parts to the list!

First are his two good nickel gen 3 15x9 6uls with 225/45 Maxxis RC-1s mounted and balanced. You can still see the word "Maxxis" on the tread. $575 shipped. New they're $626+shipping+mount/balance. That's over 20% savings from new.

Next is most of his 1st gen TSE 11.75 brake kit. Calipers and brake lines are NOT included. But 4 hats, 4 rotors, brackets, TSE 5mm spacers and ebay 3mm spacers are included. All 4 hats are used, 2 rotors are brand new, 2 have the same wear as the tires above. All 4 are safety wired. New thats $375+$100(safety wire x4)+$250(x2 hats)+62(x2 rotors), $10 for ebay spacers(lol). So just under $800+shipping new. I'd like $650 shipped.

 

Would you sell just one 6UL (don't care with or without tire)? Would like to have a spare.