1.6 parts. trans, block, head, etc
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: Cary, NC
Posts: 494
Total Cats: 6
1.6 parts. trans, block, head, etc
got some parts from a 90- 93 miata for sale. i pretty much just slapped some prices on there since its required. my prices may be way off so just make me an offer if your interested in anything
passenger side turn signal housing $30
AC compressor + 1 set of hardlines, condenser, evaporator $100 for everything
another AC compressor $50
Power steering pump, works great, just took it off to depower my rack. $50
stock shocks/springs (not including top hats) $50
transmission with 125k on it (includes shifter and ****) $200
flywheel/pressure plate/ clutch with 125k on them $100
1.6L head (needs exhaust valves replaced, includes cams, cam gears, HLA, valve cover, intake manifold, cam angle sensor, coil pack, plug wires, I took the head off the block, and didnt remove anything from it, so basically everything attached to the head is there. im willing to part if someone needs just cams, HLAs, intake manifold, throttle body, CAS, etc just ask)
one brand new exhaust valve (was told it had a burnt valve, ordered one, got the engine apart, and realized it needed four valves, the rod bearings were literally melted, and the previous owner tried rebuilding the engine and LEFT OUT THREE MAIN BEARINGS! idiot.. so im rebuilding the engine)
1.6 short block (the good one that had the crankshaft nose failure, so internals are fine)
AC and PS brackets that mount to the block $15 each
bracket for tensioner pulley $10
1.6 oilpan (and internals of oilpan, oil pickup tube and screen, shroud) $50
1.6 pistons/rods $50
bignose crank gear for timing belt $20
1.6 rear sway + endlinks $30
1.6 driver airbag (i think your not supposed to ship these? so might be local pickup only)
1.6 door handles/armrests $20
im currently rebuilding my engine, so i picked up a spare so i have everything except the crankshaft that failed (keyway stripped out, but all internals are still fine) so if you need any other engine parts not listed feel free to ask, im sure i forgot some things
post here of pm with any questions or offers.
Thanks
passenger side turn signal housing $30
AC compressor + 1 set of hardlines, condenser, evaporator $100 for everything
another AC compressor $50
Power steering pump, works great, just took it off to depower my rack. $50
stock shocks/springs (not including top hats) $50
transmission with 125k on it (includes shifter and ****) $200
flywheel/pressure plate/ clutch with 125k on them $100
1.6L head (needs exhaust valves replaced, includes cams, cam gears, HLA, valve cover, intake manifold, cam angle sensor, coil pack, plug wires, I took the head off the block, and didnt remove anything from it, so basically everything attached to the head is there. im willing to part if someone needs just cams, HLAs, intake manifold, throttle body, CAS, etc just ask)
one brand new exhaust valve (was told it had a burnt valve, ordered one, got the engine apart, and realized it needed four valves, the rod bearings were literally melted, and the previous owner tried rebuilding the engine and LEFT OUT THREE MAIN BEARINGS! idiot.. so im rebuilding the engine)
1.6 short block (the good one that had the crankshaft nose failure, so internals are fine)
AC and PS brackets that mount to the block $15 each
bracket for tensioner pulley $10
1.6 oilpan (and internals of oilpan, oil pickup tube and screen, shroud) $50
1.6 pistons/rods $50
bignose crank gear for timing belt $20
1.6 rear sway + endlinks $30
1.6 driver airbag (i think your not supposed to ship these? so might be local pickup only)
1.6 door handles/armrests $20
im currently rebuilding my engine, so i picked up a spare so i have everything except the crankshaft that failed (keyway stripped out, but all internals are still fine) so if you need any other engine parts not listed feel free to ask, im sure i forgot some things
post here of pm with any questions or offers.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM