Hard Dog SS Rollbar, Altezzas, FM turbo duals, FM high flow cat, etc.
10-06-2008, 11:42 PM
#1
Elite Member
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Houston, TX
Posts: 2,895
Total Cats: 0
Hard Dog SS Rollbar, Altezzas, FM turbo duals, FM high flow cat, etc.
For those of you that have seen my other thread here is the list of parts I do not need/want of the new aquisition. I have not figured out what I'm going to do with the car yet, and this is not a complete part out. Prices are all negotiable, but don't be an ***. Shipping not included.
Hard Dog Double Diagnol Stainless Rollbar - $850 local pick up preferred, I have no idea how to ship something this size.
FM High Flow Cat - $75 (the car is burning oil bad and the plugs looked terrible. I do not know the condition of the cat yet. Once I pull it off and check it out the price may go up)
FM Turbo Dual Exhaust (missing tips because they melted to the bumper) - $300 local pick up preferred
Racing Beat Rear Sway Bar w/Racing Beat Adjustable End Links - $100 (aka free end links w/ bar) *PENDING
Front Strut Tower Brace - $40 *PENDING
Altezza tail lights - FREE, send me your stock units and pay for shipping of these to you. *PENDING
I'll get pics of everything I can get to (car is pretty low) tomorrow. It's all on the car still so it will take me a few days to yank off what you want. I do take pay-pal.
Hard Dog Double Diagnol Stainless Rollbar - $850 local pick up preferred, I have no idea how to ship something this size.
FM High Flow Cat - $75 (the car is burning oil bad and the plugs looked terrible. I do not know the condition of the cat yet. Once I pull it off and check it out the price may go up)
FM Turbo Dual Exhaust (missing tips because they melted to the bumper) - $300 local pick up preferred
Racing Beat Rear Sway Bar w/Racing Beat Adjustable End Links - $100 (aka free end links w/ bar) *PENDING
Front Strut Tower Brace - $40 *PENDING
Altezza tail lights - FREE, send me your stock units and pay for shipping of these to you. *PENDING
I'll get pics of everything I can get to (car is pretty low) tomorrow. It's all on the car still so it will take me a few days to yank off what you want. I do take pay-pal.
Last edited by Arkmage; 10-08-2008 at 12:23 AM.
Reply
0
0
10-06-2008, 11:54 PM
#2
Elite Member
iTrader: (28)
Join Date: May 2008
Location: St. Augustine FL
Posts: 2,299
Total Cats: 2
well i have a smalll crack in the passenger side tail lights would you be willing to do that plus some cash and could you send me a pics? plus pics on the sway bas too!!!!? im interested in all those parts
Reply
0
0
10-07-2008, 09:50 AM
#5
Elite Member
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Houston, TX
Posts: 2,895
Total Cats: 0
turbobluemiata: Let me find out what a set of stock ones will cost me shipped and I'll let you know a price for the altezzas
Reply
0
0
10-07-2008, 09:57 AM
#6
Elite Member
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Houston, TX
Posts: 2,895
Total Cats: 0
Ehh... it looks like you can buy a set of these on ebay for $85 shipped, it will cost me $100+shipping for used stock lights. Ugg, I might just keep them for now unless someone wants to trade for good shape stock ones or pay more than market value for used parts 
*edit* reconsidering P51s offer, depends on crack size and appearance*
*edit* reconsidering P51s offer, depends on crack size and appearance*
Reply
0
0
10-08-2008, 12:06 AM
#9
Elite Member
Thread Starter
iTrader: (3)
Join Date: May 2006
Location: Houston, TX
Posts: 2,895
Total Cats: 0
Altezzas and Rear Sway are pending to P51.
Strut brace pending also.
FYI: These rollbars are considerably more than $850 new. Sending me PMs about how I'm asking for the "new bar price" and that I should "make an offer that's much lower" will do nothing but **** me off. A little lower is reasonable, but used powder coated bars go for $500 picked up around here (no shipping or waiting) so I feel $850 for the stainless is very fair.
*EDIT*
ADDING PICS AS REQUESTED... Dims are to help determine fit with turbo installed.
Strut brace pending also.
FYI: These rollbars are considerably more than $850 new. Sending me PMs about how I'm asking for the "new bar price" and that I should "make an offer that's much lower" will do nothing but **** me off. A little lower is reasonable, but used powder coated bars go for $500 picked up around here (no shipping or waiting) so I feel $850 for the stainless is very fair.
*EDIT*
ADDING PICS AS REQUESTED... Dims are to help determine fit with turbo installed.
Last edited by Arkmage; 10-08-2008 at 12:22 AM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Lincoln Logs
Dynos and timesheets
4
09-23-2015 12:26 PM
