1.6L Megan Racing Manifold +T25 $100+shipping
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Jan 2008
Location: Waterford, MI
Posts: 59
Total Cats: 0
1.6L Megan Racing Manifold +T25 $100+shipping
If the price is to high let me know.
The manifold is clean doesn't look like its been mounted. T25 has a small (less than 1/16in) amount of axial shaft play but none sideways, also has the waste gate welded shut and needs the clamping ring that holds on the exhaust side.
I will also trade towards a 1.8l manifold.
Sorry about the poor pics, if you need better let me know and I'll see what I can do.
The manifold is clean doesn't look like its been mounted. T25 has a small (less than 1/16in) amount of axial shaft play but none sideways, also has the waste gate welded shut and needs the clamping ring that holds on the exhaust side.
I will also trade towards a 1.8l manifold.
Sorry about the poor pics, if you need better let me know and I'll see what I can do.
Last edited by tonybennett3000; 01-14-2009 at 11:20 PM.
#13
DragonsMaw- If you have a mig and you can weld and fit pipes anywhat, build one. If you do a 1/4 *** decent job you'll have a bullet proof manifold. Where as with this one you will have to brace it, reweld all the welds, then reweld again when it cracks, etc. In the long run, it will actually be easier and less time to just make a new one.
#17
Junior Member
Thread Starter
iTrader: (4)
Join Date: Jan 2008
Location: Waterford, MI
Posts: 59
Total Cats: 0
turbo w/o welded wastegate is not for sale, gotta have one to put on my car when I finally do get a manifold that fits : )
I'd also rather just let the whole thing go together.
I'd also rather just let the whole thing go together.
Last edited by tonybennett3000; 01-15-2009 at 07:14 PM.
#18
Elite Member
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
Look at that awsome design, 1 STRAIGHT into 4 Then 90* into the turbo. 2 and 3 are in the middle of nowhere 90* into 1 and 4.
I had a Megan header on my Prelude, and it held up fine and looked great for 2 years or so. Of course thats not a turbo manifold, so I cant say. I would imagine braced up it would probably work for a while.
I had a Megan header on my Prelude, and it held up fine and looked great for 2 years or so. Of course thats not a turbo manifold, so I cant say. I would imagine braced up it would probably work for a while.