Enthuza Cat, 1.8 Axles, MSM Bumper Lip, Headlamps, and more
 

Garage clearing out:

1.8 Axles, Later model 1-piece design that won't rub on 3" exhaust, Non ABS. Axle nuts included, if you want to re-use used axle nuts (which most people do); I paid $200 + ship, $150

MSM rear bumper lip, very hard to find, velocity red with minor scratches, it's still on the bumper so I should have all the hardware and what not; $150

SOLD BP4W 99/00 Cylinder Head
http://img695.imageshack.us/img695/4066/44698053.jpg

no cams, missing 1 lifter, looks usable to me, perfect for a GRM Challenge build. I received this item as part of a trade deal and have no knowledge of its origins, so I'll just sell it stupid cheap. Picture gallery: Yfrog Album
Local inspection welcomed. $90


I have some other items I need to put my hands on and I'll list. I'm pretty sure I have some extra NB intake manifolds and fuel rails, and who knows what else. I'll work on getting some pics in the next day or two.
Prices listed do not include shipping. FedEX will probably be the least costly method for these large items. Shipping from zip 30548.

You have a PM about the head, Ben.

To answer the question I got in PM on the cyl head, the circled area in the pic in the photo album is showing the (1) missing lifter.

if ren dont take the head im intrested! can i get a shipping quote to 60172

thanks

Does the $150 include the bumper the lip is attached to?

The bumper has some damage, would be fine for a race car. Sure, absolutely it's included for a local buyer. Cost of shipping would be well over $100 and not worth it.

I'll take the head... can you get a shipping quote to 94545 and your Paypal info in a PM to me? You mentioned intake manifolds... have one that fits this head?

Thanks

Can you get pics of the bumper & lip? I have contacts in Atlanta that can help me out with shipping.

Yeah, I will.

Thanks

Random brake parts. Appears to be a set of 1.6 brackets + (1) 1.8 front bracket + (1) rear caliper. $15 + shipping
http://img12.imageshack.us/img12/1736/pict0001eip.jpg

1.6 Cat Converter by Enthuza. Jason made this to mate my 2.5" TurboTony downpipe and 3" Enthuza exhaust. I literally only ran it for the emissions sniff test, and took it back off. Half off at $75
http://img252.imageshack.us/img252/9054/pict0002ev.jpg

Axle as mentioned earlier. 1 pictured, but both included.
http://img23.imageshack.us/img23/9196/pict0003ro.jpg

NA8 cam cover. I spent several hours cleaning it up, painting (it's texture black, not gray), and polishing. Looks much better in person than in a sun washed out photo. $75
http://img43.imageshack.us/img43/3845/pict0004wi.jpg


NA8 cam cover 2. This one has the gear-area removed and was powdercoated black. Overall pretty nice, the speckles you see are dust. $50
http://img509.imageshack.us/img509/1189/pict0006nh.jpg

SOLD NB tail lamps, 99/00 style. Will fit all NB's though if you wanted to convert an 01+ to the older style. $50/ea or $80/pr.
http://img12.imageshack.us/img12/35/pict0007gt.jpg

SOLD NB Intake Mani, from a 23K mile 01 motor, $75
http://img121.imageshack.us/img121/5117/pict0008a.jpg
http://img12.imageshack.us/img12/8/pict0017ch.jpg

NB fuel rail, sorry I know it's hard to see through the plastic, but I didn't want to break the seal. $10
http://img509.imageshack.us/img509/4373/pict0009kq.jpg

Spare tire from my 99, never used, $10
http://img257.imageshack.us/img257/7708/pict0010vw.jpg

Pics of the MSM rear lip
http://img252.imageshack.us/img252/5586/pict0011b.jpg
http://img121.imageshack.us/img121/6299/pict0012b.jpg
http://img23.imageshack.us/img23/5804/pict0013g.jpg
http://img509.imageshack.us/img509/1016/pict0014q.jpg
http://img257.imageshack.us/img257/1672/pict0015y.jpg

I'll take the left NB tail lamp for sure. I want to check the right one on my car tonight to see if I just want to do the pair. They look perfect, yes?

I would classify them as "very good to excellent." I only hesitate to say perfect because they are used parts, but they look extremely nice for used parts. I'll take some huge size close ups if you want.

Which reminds me that I have some headlamps too.

99/00 used, good condition passenger side headlamp, no broken tabs, no accident damage, slight hazing only on top that I'd imagine would polish out; $100
99/00 brand new oem mazda pass side headlamp, as perfect as it gets because it's still in the box; $175

Parts I'll have available soon:

99/00 10AE front bumper cover with foglamps and factory spoiler. Factory spoiler has a little damage, but looks ok, especially from a couple feet. Foglamps included. Waiting for my painter to get to painting my MSM bumper before I take it off.

Complete 3.90 Torsen II diff and another set of non-abs 1-piece axles. Basically a complete 1.8 torsen diff swap, minus a driveshaft. Waiting for delivery of my 3.6 OS-G MSM diff before I pull it.

Should be just a few weeks on both parts.

OK. Let me look at mine. If the passenger side is rough, I'll take both. Want them to match.

My right side is pretty good, so I'll take the left (driver's side) for $50 shipped. Paypal OK? PM me your info.

PM sent Stein. Sorry for late reply, damn DSL was out all day today. But, for my troubles, I'm happy to report that AT&T gave me a service credit of *nearly* $5. Whoo hoo. I'm supersizing next time I go to McD's.

L tail pending to Stein
Cyl head w/ manifold pending to Rennkafer

Paypal sent.

Ben, do you have any front LCA's laying around?

I had nearly a full set but gave them all away.

Both tails sold, head/intake mani pending, axles pending.

I assume one to me? Sent paypal last Friday. Haven't heard anything since.

Yessir, one was to you. I'll have boxes from uline late this afternoon and ship this evening or tomorrow.

Paypal sent for head/mani, thanks for your patience Ben.

Buyer never paid for axles, so I guess they're still available.

Cyl head and intake manifold now sold. Ships tonight.

cyl head ships? not being picked up? wat?

Yup, the very first person to contact me about it made payment at the 0 hour. Your boy Ferdi was next in line, and actually scheduled to come see it today.

damn :(

Was wondering if your Torsen is still up for grabs once you get your os giken in. If so, do you know how much you'll be wanting for it?

Which Torsen? The MSM Bosch unit is spoken for. The 3.909 Torsen II pumpkin that's coming out of the car is available, or I should say will be available after the swap.

It will be a few weeks. The car is going to the PRI show in Orlando, and I've got enough little projects to keep me occupied before I start with big projects.

Also, all items paid for are indeed shipped.

valve covers, axles, 1.6 cat, msm lip, headlamps still available

OBO on remaining items...

Hi,

do you still have the rear MSM lip?
If so, would you be willing to send it to the netherlands?

If so, you have a deal!

I cannot send PM yet here, so maybe you can send me an email? g.vanderstappen@zonnet.nl

I dunno, I think shipping will probably be insanely expensive.

even with shipment i am most likely still interested. These MSM parts are really expensive here.

and with the current exchange rate, it makes it cheaper...

I am also looking foor the MSM front lip, could you help me with that?

Used pass headlamp sold.

Lazy, I sent you an email earlier today.

Necro bump. Still have axles, MSM lip, cat, cam covers. Which surprises me.
Reasonable offers considered/accepted. Need money for Flex!

do you have a pic of the front of the na8 cam cover 2. Is it nice and flush, or cut with a hacksaw/grinder?

I could get a pic for you if you'd like. I bought the cover as it sits, so I don't know how it was cut. They did do a pretty good job with the cut though; it's smooth save for 1 small imperfection I saw. I bought it from someone else on this board a year or three ago. Don't remember who it was though.

It's not ugly or embarrassing or anything. I'd rock it, but I have that stupid NB cam angle sensor to deal with.

If you don't mind. I just had a cover bead blasted but it's the rectangle type that doesn't cover the cam gears. I like the rounded one like you have better. I just didn't want to hassle with removing the extra metal.

N/P. It's not going to Pebble Beach, but it is a nice looking piece. I doubt you'd be dissatisfied.

I'll get whatever pics and answer my PMs this evening.

Help this man clear some garage space bump.

Hi,
will sent you a PM for the msm rearlip.

Wow I got 2 PMs on this today. Long gone guys.

Actually I still have the axles if anyone needs a set. They've been in my garage for probably 4 years. I'm sure someone needs them...

how cheap? you know I scavenge...