1.8 Axles, MSM Bumper Lip, 99 Cyl Head, Plus lots more added
#1
Supporting Vendor
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Enthuza Cat, 1.8 Axles, MSM Bumper Lip, Headlamps, and more
Garage clearing out:
1.8 Axles, Later model 1-piece design that won't rub on 3" exhaust, Non ABS. Axle nuts included, if you want to re-use used axle nuts (which most people do); I paid $200 + ship, $150
MSM rear bumper lip, very hard to find, velocity red with minor scratches, it's still on the bumper so I should have all the hardware and what not; $150
SOLDBP4W 99/00 Cylinder Head
no cams, missing 1 lifter, looks usable to me, perfect for a GRM Challenge build. I received this item as part of a trade deal and have no knowledge of its origins, so I'll just sell it stupid cheap. Picture gallery: Yfrog Album
Local inspection welcomed. $90
I have some other items I need to put my hands on and I'll list. I'm pretty sure I have some extra NB intake manifolds and fuel rails, and who knows what else. I'll work on getting some pics in the next day or two.
Prices listed do not include shipping. FedEX will probably be the least costly method for these large items. Shipping from zip 30548.
1.8 Axles, Later model 1-piece design that won't rub on 3" exhaust, Non ABS. Axle nuts included, if you want to re-use used axle nuts (which most people do); I paid $200 + ship, $150
MSM rear bumper lip, very hard to find, velocity red with minor scratches, it's still on the bumper so I should have all the hardware and what not; $150
SOLD
no cams, missing 1 lifter, looks usable to me, perfect for a GRM Challenge build. I received this item as part of a trade deal and have no knowledge of its origins, so I'll just sell it stupid cheap. Picture gallery: Yfrog Album
Local inspection welcomed. $90
I have some other items I need to put my hands on and I'll list. I'm pretty sure I have some extra NB intake manifolds and fuel rails, and who knows what else. I'll work on getting some pics in the next day or two.
Prices listed do not include shipping. FedEX will probably be the least costly method for these large items. Shipping from zip 30548.
__________________
91 Turbo | 10AE Turbo | 01 Track Rat | #323 Mazda Champcar
Chief of Floor Sweeping, DIYAutoTune.com & AMP EFI
Crew Chief, Car Owner & Least Valuable Driver, HongNorrthRacing
Last edited by Ben; 12-01-2009 at 04:37 PM.
#11
Supporting Vendor
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Random brake parts. Appears to be a set of 1.6 brackets + (1) 1.8 front bracket + (1) rear caliper. $15 + shipping
1.6 Cat Converter by Enthuza. Jason made this to mate my 2.5" TurboTony downpipe and 3" Enthuza exhaust. I literally only ran it for the emissions sniff test, and took it back off. Half off at $75
Axle as mentioned earlier. 1 pictured, but both included.
NA8 cam cover. I spent several hours cleaning it up, painting (it's texture black, not gray), and polishing. Looks much better in person than in a sun washed out photo. $75
NA8 cam cover 2. This one has the gear-area removed and was powdercoated black. Overall pretty nice, the speckles you see are dust. $50
SOLDNB tail lamps, 99/00 style. Will fit all NB's though if you wanted to convert an 01+ to the older style. $50/ea or $80/pr.
SOLDNB Intake Mani, from a 23K mile 01 motor, $75
NB fuel rail, sorry I know it's hard to see through the plastic, but I didn't want to break the seal. $10
Spare tire from my 99, never used, $10
Pics of the MSM rear lip
1.6 Cat Converter by Enthuza. Jason made this to mate my 2.5" TurboTony downpipe and 3" Enthuza exhaust. I literally only ran it for the emissions sniff test, and took it back off. Half off at $75
Axle as mentioned earlier. 1 pictured, but both included.
NA8 cam cover. I spent several hours cleaning it up, painting (it's texture black, not gray), and polishing. Looks much better in person than in a sun washed out photo. $75
NA8 cam cover 2. This one has the gear-area removed and was powdercoated black. Overall pretty nice, the speckles you see are dust. $50
SOLD
SOLD
NB fuel rail, sorry I know it's hard to see through the plastic, but I didn't want to break the seal. $10
Spare tire from my 99, never used, $10
Pics of the MSM rear lip
__________________
91 Turbo | 10AE Turbo | 01 Track Rat | #323 Mazda Champcar
Chief of Floor Sweeping, DIYAutoTune.com & AMP EFI
Crew Chief, Car Owner & Least Valuable Driver, HongNorrthRacing
Last edited by Ben; 11-25-2009 at 09:27 AM.
#13
Supporting Vendor
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
I would classify them as "very good to excellent." I only hesitate to say perfect because they are used parts, but they look extremely nice for used parts. I'll take some huge size close ups if you want.
Which reminds me that I have some headlamps too.
99/00 used, good condition passenger side headlamp, no broken tabs, no accident damage, slight hazing only on top that I'd imagine would polish out; $100
99/00 brand new oem mazda pass side headlamp, as perfect as it gets because it's still in the box; $175
Which reminds me that I have some headlamps too.
99/00 used, good condition passenger side headlamp, no broken tabs, no accident damage, slight hazing only on top that I'd imagine would polish out; $100
99/00 brand new oem mazda pass side headlamp, as perfect as it gets because it's still in the box; $175
#14
Supporting Vendor
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
Parts I'll have available soon:
99/00 10AE front bumper cover with foglamps and factory spoiler. Factory spoiler has a little damage, but looks ok, especially from a couple feet. Foglamps included. Waiting for my painter to get to painting my MSM bumper before I take it off.
Complete 3.90 Torsen II diff and another set of non-abs 1-piece axles. Basically a complete 1.8 torsen diff swap, minus a driveshaft. Waiting for delivery of my 3.6 OS-G MSM diff before I pull it.
Should be just a few weeks on both parts.
99/00 10AE front bumper cover with foglamps and factory spoiler. Factory spoiler has a little damage, but looks ok, especially from a couple feet. Foglamps included. Waiting for my painter to get to painting my MSM bumper before I take it off.
Complete 3.90 Torsen II diff and another set of non-abs 1-piece axles. Basically a complete 1.8 torsen diff swap, minus a driveshaft. Waiting for delivery of my 3.6 OS-G MSM diff before I pull it.
Should be just a few weeks on both parts.
#17
Supporting Vendor
Thread Starter
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
PM sent Stein. Sorry for late reply, damn DSL was out all day today. But, for my troubles, I'm happy to report that AT&T gave me a service credit of *nearly* $5. Whoo hoo. I'm supersizing next time I go to McD's.
L tail pending to Stein
Cyl head w/ manifold pending to Rennkafer
L tail pending to Stein
Cyl head w/ manifold pending to Rennkafer