1.8 motor
Thread Starter
Junior Member
iTrader: (6)
Joined: Jun 2011
Posts: 348
Total Cats: -107
From: Bonita springs florida
1.8 motor
1996 with 160k starts right up and runs good.....no smoking and compresson tested as follows on the motor when warm with fully charged battery
cyl 1 176
cyl 2 181
cyl 3 179
cyl 4 175
some lifter noise on a cold start sometimes
would recommend a new timing belt water pump and front and rear seals before installing. do the usual cleaning and maintenance expected to be done when buying a used motor and you will have yourself a good motor for a long time
motor will be sold with exhaust manifold and intake manifold. everything from valve cover to oil pan. coil wires cas.....pretty much everything exsept the ac compressor and alternator and ps pump.
valve cover is pitted and could use paint and or cleaning
LOCAL PICK UP $450
5 spd transmission also available for additional $200
I can also ship at additional charge
cyl 1 176
cyl 2 181
cyl 3 179
cyl 4 175
some lifter noise on a cold start sometimes
would recommend a new timing belt water pump and front and rear seals before installing. do the usual cleaning and maintenance expected to be done when buying a used motor and you will have yourself a good motor for a long time
motor will be sold with exhaust manifold and intake manifold. everything from valve cover to oil pan. coil wires cas.....pretty much everything exsept the ac compressor and alternator and ps pump.
valve cover is pitted and could use paint and or cleaning
LOCAL PICK UP $450
5 spd transmission also available for additional $200
I can also ship at additional charge
0
1996 with 160k starts right up and runs good.....no smoking and compresson tested as follows on the motor when warm with fully charged battery
cyl 1 176
cyl 2 181
cyl 3 179
cyl 4 175
some lifter noise on a cold start sometimes
would recommend a new timing belt water pump and front and rear seals before installing. do the usual cleaning and maintenance expected to be done when buying a used motor and you will have yourself a good motor for a long time
motor will be sold with exhaust manifold and intake manifold. everything from valve cover to oil pan. coil wires cas.....pretty much everything exsept the ac compressor and alternator and ps pump.
valve cover is pitted and could use paint and or cleaning
LOCAL PICK UP $450
5 spd transmission also available for additional $200
I can also ship at additional charge
cyl 1 176
cyl 2 181
cyl 3 179
cyl 4 175
some lifter noise on a cold start sometimes
would recommend a new timing belt water pump and front and rear seals before installing. do the usual cleaning and maintenance expected to be done when buying a used motor and you will have yourself a good motor for a long time
motor will be sold with exhaust manifold and intake manifold. everything from valve cover to oil pan. coil wires cas.....pretty much everything exsept the ac compressor and alternator and ps pump.
valve cover is pitted and could use paint and or cleaning
LOCAL PICK UP $450
5 spd transmission also available for additional $200
I can also ship at additional charge
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
Sep 30, 2015 02:44 PM
