|
1991 part out
15 Attachment(s)
Parting out my 1.6, here is an incomplete list, any minor parts, especially body parts, lights, brackets, connectors, etc, just ask. All prices are obo and include shipping conus unless otherwise stated.
A dozen of hardtop latch bolts, $20 Striker plates with Frankenstein bolts, $45 Hardtop corner protectors, part # na01-r1-936a and na01-r1-946a, have two pairs, $20 each pair 1.8 front calipers (non-Sport) --- $100 shop manual, some loose pages but complete ---- $40 splash pan ---- $50 hood release cable ---- $20 cowl panel ---- $30 trunk lid ---- $50 rear bumper ---- $50 Frankenstein bolts with plates ---- $30 hood ---- $100 hood latch and bracket ---- $20 tail light ---- $40 each gas lid ---- $10 a/c control unit ---- $30 center console ---- $40 clutch pedal assembly ---- $30 glove box ---- $30 coil pack ---- $30 ECU ---- $40 radiator cooling fan ---- $50 gauge cluster ---- $35 ignition switch and lock cylinder ---- $50 steering column ---- $30 brake master cylinder and booster ---- $40 SOLD: engine hardtoptransmission brake proportioning valve Innovate MTX-L o2 sensor SuperMiata endlinks 15x8 UL wheels with shot Toyo R888 instrument cluster hood metal panel under steering column AWR motor mounts, 70 duro GarageStar wiper cowl in wrinkle black 1.8 open diff with 4.3 gears front bumper front bumper support front fenders manual steering rack front tow hook Enthuza 2.25" test pipe BMW VTPS Stratified MS2 PnP + GM IAT sensor, set up for VTPS Kirkey seats eccentric bolts Cobalt catback GarageStar radiator cooling panel 1.8 rear Sport calipers 1.8 front Carbotech XP8 pads doors SuperMiata radiator SuperMiata ss brake lines alternatorSuperMiata ss clutch line all control arms with IL Motorsports bushings FCM coilovers, 600/450 spring rates igniter Rubber protectors, na01-r1-864 and na01-r1-874 1.6 Miata automatic throttle body with a VTPS BossFrog double hoop roll bar + harness bar I/O Port rear braces Suzuki Cappuccino washer tank bottle top boot cover Lotus seats Coolant spacer with a 1.6 thermostat housing, thermostat, gaskets, bolts rear tow hook luggage rack Eibach FSB Raceland header headlight motors RennenMetal hard top brackets with hardware Maruha ss lower radiator pipe radio surround rear finish panel 1.8 diff carrier 1.8 driveshaft stock intake headlights |
Interested in the motor mounts if willing to ship
|
Read the op. :)
Originally Posted by mntech
(Post 1389521)
Interested in the motor mounts if willing to ship
|
How much for the oil pressure gauge and oil pressure sensor? Shipped to 79927
|
Originally Posted by Max Enrique
(Post 1389571)
How much for the oil pressure gauge and oil pressure sensor? Shipped to 79927
|
Motor mounts sold!
|
PM'd you
|
Payment sent for Wiper Cowl. :)
|
Wiper cowl sold!
|
Is that megasquirt for 90-93 with 1.6L?
|
Originally Posted by Frenchmanremy
(Post 1389621)
Is that megasquirt for 90-93 with 1.6L?
|
Added more pictures.
|
3 Attachment(s)
MS2 pictures.
|
Fat Cat Coilovers still available? Are they regular or V2? Also how many miles? Thanks
|
About 4k miles on the Fat Cats. The shocks are from an R-pkg, no idea regular/V2, Shaikh did a custom revalve for me to use at the Texas World Speedway, the coils are not adjustable.
Originally Posted by Lemonlyme
(Post 1390381)
Fat Cat Coilovers still available? Are they regular or V2? Also how many miles? Thanks
|
Price and info on the header? Also interested in the test pipe.
Also, what do you want for the shifter gasket boot thing. |
It is a Raceland header for a 1.6 engine, 1k miles max on it.
I have a local coming over this weekend to pick up some body panels and he may take the test pipe, will let you know if he does not. $20 for the shift boot insulator, it has about 5k miles on it.
Originally Posted by x_25
(Post 1390410)
Price and info on the header? Also interested in the test pipe.
Also, what do you want for the shifter gasket boot thing. |
Let me know on the test pipe. I will grab it and the boot if the other guy doesn't take them.
Would you be willing to ship the header? And if so, what would you be looking to get. I am in 07821. |
Let me pack the header over the weekend and I will get a shipping quote Monday.
Originally Posted by x_25
(Post 1390484)
Let me know on the test pipe. I will grab it and the boot if the other guy doesn't take them.
Would you be willing to ship the header? And if so, what would you be looking to get. I am in 07821. |
17 Attachment(s)
More pictures.
On the manual rack, one tie rod end is good, but the boot starts showing signs of cracking, the other one is no good. I would replace both anyway. Pulled the rear suspension out. The heat shield on the hubs is notched and flattened to accommodate 1.8 Sport rotors. Pulled all the brakes, see pictures for how much pad is left. The plastic part is from the wiper cowl. Front bumper, front bumper support, and front fenders are gone. |
PM sent about BMW VTPS
|
8 Attachment(s)
Some more pictures.
1.6 Miata automatic throttle body with a VTPS -- $90 BMW VTPS -- $40 Custom intake + IAT + heat shield I snagged from someone here a while ago -- $50 Ignition wires -- $20 Coilpack -- $45 . |
Stratified Megasquirt sold!
|
Bump for a great seller!
|
Hardtop and Kirkey seats are gone. FCM coils pending a local sale.
|
Cobalt catback sold!
|
Do you still have any body parts, i.e. tail light lens, headlights, front bumper, etc.....
|
Yes! Will post pictures of individual parts once I start taking them off the car. Front bumper and fenders are sold, everything else is available including headlights, tail lights, etc.
Originally Posted by coletrickle
(Post 1392966)
Do you still have any body parts, i.e. tail light lens, headlights, front bumper, etc.....
|
12 Attachment(s)
Pictures of the radiator cooling panel.
Air dam with custom mesh, 50 shipped. Wiffle balls with holes on each side, made of polyethylene, perfect to use as baffles in a meth tank to prevent meth from sloshing around, $20 per dozen shipped. |
Sport brakes
Do you still have the sport brakes? Any pics?
|
Originally Posted by BlackStarMIata
(Post 1393616)
Do you still have the sport brakes? Any pics?
|
Radiator cooling panel sold!
|
ttt, added more parts to the op
|
PM'ed
|
1.8 rear Sport brakes sold!
|
Bump, added the following:
SuperMiata ss brake lines ---- $75 SuperMiata radiator, brand new ---- $300SuperMiata ss clutch line ---- $20 coolant reroute spacer -- $70 Maruha ss lower radiator pipe ---- $50 Suzuki Cappuccino washer tank bottle -- $40 |
Bump for a good seller. Thanks for the sport brakes.
|
Pm coming your way
|
Radiator is sold!
|
11 Attachment(s)
More pictures:
SuperMiata ss brake and clutch lines, $95 rear finish panel, $100 + shipping speedo cable, $40 ignitor, $20 AiM Chron, $25 |
ss brake lines and clutch line sold!
|
You don't happen to have an alternator for the 1.6, do you?
|
Yes, I do! Will not be able to ship until Monday though.
Originally Posted by unixgeek
(Post 1398937)
You don't happen to have an alternator for the 1.6, do you?
|
Alternator and control arms sold!
|
I'm in need of a driver's side door, with quarter window and mirror intact (nothing else needed). Any chance you have one and would be willing to ship to 08840?
|
Both doors sold a while ago.
|
PMed about speedometer cable.
|
Speedo cable sold!
|
Bump, added more pictures to the op and added the following items:
Hardtop corner protectors, part # na01-r1-936a and na01-r1-946a, have two pairs, $20 each pair Rubber protectors, na01-r1-864 and na01-r1-874, $15 A dozen of hardtop latch bolts, $20 Striker plates with Frankenstein bolts, $45 RennenMetal hard top brackets with hardware, $60 Coolant spacer with Kia thermostat housing, both brand new, $90 Coolant spacer with a 1.6 thermostat housing, thermostat, gaskets, bolts, $90 |
Hi, Im in San Antonio. If the igniter (ignition control module) is still available for $20 shipped, I'll take it off your hands. Let me know, I'll send you payment right away via PayPal, thanks!
|
Igniter sold!
|
Coolant spacer with Kia housing and rubber protectors, na01-r1-864 and na01-r1-874, sold!
|
1.6 auto throttle body with VTPS sold!
|
2 Attachment(s)
Finally found the rear tow hook, never used, $35 shipped conus. I was to pm a couple folks about it but needed to clean my inbox and lost those messages, sorry.
|
Boss Frog roll bar and harness sold!
|
I/O Port rear braces sold!
|
PM sent/free bump
|
I'll take the ECU.
Is the glove box clean with no scratches? How much to ship to California? |
Originally Posted by joeyb
(Post 1424547)
I'll take the ECU.
Is the glove box clean with no scratches? How much to ship to California? |
What color and condition are the hood and trunk in? Mine have hail damage and have been looking into getting replacments.
|
| All times are GMT -4. The time now is 09:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands