1994 1.8 motor disassembled, 1994 manual trans, turbos
05-28-2008, 03:47 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
1994 1.8 motor disassembled, 1994 manual trans, turbos
I am getting rid of my miata and all of the stuff i have acquired over the years the list is as follows
1994 complete 1.8 motor totally taken apart, all head parts cleaned. This motor was from a 190k mileage car, nothing wrong with the motor at all, it was replaced by a turbo 2.0. I took the motor apart intending on rebuilding it and putting it in my 1990. the motor has everything, intake, injectors, you name it. Everything was in excellent condition, i checked the bores in the block, and they are all within spec, no major scratches, give it a good cleaning and hone job, and its ready to go. Please make an offer on any part or the whole package that you may want.
1994 manual trans from above car. Good working trans from what i was told.
MSD boost retard unit for the miata. I will take 30$ shipped
paxton (vortech) boost AFPR with a 10:1 plate installed i beleive. 20$ shipped
boost bypass valve from a volvo, with home made in line adapter 20$ shipped
Modified eclipse inner cooler, also known as the "Shintercooler" do a search on here, ( https://www.miataturbo.net/forum/sho...rcooler&page=3 see post 50)and you will see it. $30 shipped
td04 13g turbo from a Eagle Talon, good condition, bearings are good, also i will throw in another 13g that is taken apart, needs to be rebuilt. $40 shipped.
I have a 1.6 manafold flange from a stock manifold, that has had th tubes cut off, and the startings of a log type manafold with weld els. $45 shipped
I have a new oil feel line that is made to connect from the 13g to the miata. i cant remember the thread sizes. 20$ shipped
Thats all that i can think of right now, e-mail me if you want pics of anything, or want to make an offer.
adbradley@terracon.com
Adam
1994 complete 1.8 motor totally taken apart, all head parts cleaned. This motor was from a 190k mileage car, nothing wrong with the motor at all, it was replaced by a turbo 2.0. I took the motor apart intending on rebuilding it and putting it in my 1990. the motor has everything, intake, injectors, you name it. Everything was in excellent condition, i checked the bores in the block, and they are all within spec, no major scratches, give it a good cleaning and hone job, and its ready to go. Please make an offer on any part or the whole package that you may want.
1994 manual trans from above car. Good working trans from what i was told.
MSD boost retard unit for the miata. I will take 30$ shipped
paxton (vortech) boost AFPR with a 10:1 plate installed i beleive. 20$ shipped
boost bypass valve from a volvo, with home made in line adapter 20$ shipped
Modified eclipse inner cooler, also known as the "Shintercooler" do a search on here, ( https://www.miataturbo.net/forum/sho...rcooler&page=3 see post 50)and you will see it. $30 shipped
td04 13g turbo from a Eagle Talon, good condition, bearings are good, also i will throw in another 13g that is taken apart, needs to be rebuilt. $40 shipped.
I have a 1.6 manafold flange from a stock manifold, that has had th tubes cut off, and the startings of a log type manafold with weld els. $45 shipped
I have a new oil feel line that is made to connect from the 13g to the miata. i cant remember the thread sizes. 20$ shipped
Thats all that i can think of right now, e-mail me if you want pics of anything, or want to make an offer.
adbradley@terracon.com
Adam
Last edited by adbradley; 05-28-2008 at 06:33 PM.
Reply
0
0
05-30-2008, 01:57 AM
#8
not sure on that, looks like this, only black http://images.google.com/imgres?imgu...%3Den%26sa%3DN
Reply
0
0
06-08-2008, 10:01 AM
#9
Senior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
The MSD and all other parts are available. Please PM me with questions, image requests, or offers.. I would really like to get this stuff out of the garage. I am willing to let the trans go for $50
Reply
0
0
06-30-2008, 09:38 AM
#10
Senior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
I still have all of these items available. Please make me an offer, i really want to get this stuff out of my garage. I have a complete 1.8 engine taken apart, so any part you want, i have it.
Reply
0
0
07-05-2008, 11:18 AM
#14
Senior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
Ok here is a revised list with LOWER PRICES. I really want to get rid of this stuff!
1994 complete 1.8 motor totally taken apart, all head parts cleaned. This motor was from a 190k mileage car, nothing wrong with the motor at all, it was replaced by a turbo 2.0. I took the motor apart intending on rebuilding it and putting it in my 1990. the motor has everything, intake, injectors, you name it. Everything was in excellent condition, i checked the bores in the block, and they are all within spec, no major scratches, give it a good cleaning and hone job, and its ready to go. Please make an offer on any part or the whole package that you may want. The oil pump, water pump, and timing cover have been sold.
You can have the entire engine for $200 plus what ever shipping is to your area! Or get Parts, Block $40, Head $50, Crank $40, Cams $20, Valve Train $20, Pistons and rods $30, Valve Cover $20, Oil Pan $15, intake manifold $30, Fuel rail with stock injectors $35, starter unknown condition $10, Flywheel $20 (oil pump water pump timing cover $25 *sold*)
1994 manual trans from above car. Good working trans from what i was told. 50$
None of the above prices include shipping
MSD boost retard unit for the miata. I will take 20$ shipped *SOLD*
paxton (vortech) boost AFPR with a 10:1 plate installed i beleive. 15$ shipped
boost bypass valve from a volvo, with home made in line adapter 10$ shipped
Modified eclipse inner cooler, also known as the "Shintercooler" do a search on here, ( https://www.miataturbo.net/forum/show...rcooler&page=3 see post 50)and you will see it. $20 shipped
td04 13g turbo from a Eagle Talon, good condition, bearings are good, also i will throw in another 13g that is taken apart, needs to be rebuilt. *SOLD*
I have a 1.6 manafold flange from a stock manifold, that has had th tubes cut off, and the startings of a log type manafold with weld els. $25 shipped
I have a new oil feel line that is made to connect from the 13g to the miata. i cant remember the thread sizes. *sold*
e-mail me if you want pics of anything, or want to make an offer.
1994 complete 1.8 motor totally taken apart, all head parts cleaned. This motor was from a 190k mileage car, nothing wrong with the motor at all, it was replaced by a turbo 2.0. I took the motor apart intending on rebuilding it and putting it in my 1990. the motor has everything, intake, injectors, you name it. Everything was in excellent condition, i checked the bores in the block, and they are all within spec, no major scratches, give it a good cleaning and hone job, and its ready to go. Please make an offer on any part or the whole package that you may want. The oil pump, water pump, and timing cover have been sold.
You can have the entire engine for $200 plus what ever shipping is to your area! Or get Parts, Block $40, Head $50, Crank $40, Cams $20, Valve Train $20, Pistons and rods $30, Valve Cover $20, Oil Pan $15, intake manifold $30, Fuel rail with stock injectors $35, starter unknown condition $10, Flywheel $20 (oil pump water pump timing cover $25 *sold*)
1994 manual trans from above car. Good working trans from what i was told. 50$
None of the above prices include shipping
MSD boost retard unit for the miata. I will take 20$ shipped *SOLD*
paxton (vortech) boost AFPR with a 10:1 plate installed i beleive. 15$ shipped
boost bypass valve from a volvo, with home made in line adapter 10$ shipped
Modified eclipse inner cooler, also known as the "Shintercooler" do a search on here, ( https://www.miataturbo.net/forum/show...rcooler&page=3 see post 50)and you will see it. $20 shipped
td04 13g turbo from a Eagle Talon, good condition, bearings are good, also i will throw in another 13g that is taken apart, needs to be rebuilt. *SOLD*
I have a 1.6 manafold flange from a stock manifold, that has had th tubes cut off, and the startings of a log type manafold with weld els. $25 shipped
I have a new oil feel line that is made to connect from the 13g to the miata. i cant remember the thread sizes. *sold*
e-mail me if you want pics of anything, or want to make an offer.
Last edited by adbradley; 07-11-2008 at 02:08 PM.
Reply
0
0
07-13-2008, 12:22 AM
#19
Newb
Join Date: Feb 2008
Posts: 19
Total Cats: 0
Still have the 1.8 fuel rail and injectors? If so please tell me your Paypal account and I'll send the payment, thanks.
I'm at 12065 if you want to look up shipping costs.
Can't PM yet so please reply here or e-mail me at teamosoi76 AT yahoo.com. Thanks!
I'm at 12065 if you want to look up shipping costs.
Can't PM yet so please reply here or e-mail me at teamosoi76 AT yahoo.com. Thanks!
Reply
0
0
