2 Turbos, Megastim FS
#1
2 Turbos, Megastim FS
Build is done so Im looking to get rid of some extra parts.
First up is a saab turbo from a saab 9000 (I think, what I was told anyways)
The good: turbo is in pretty great shape. Shaft play is negligible. I had planned on using this one on my car, but the flanges are odd.
The bad: missing one of the clamp-plate things that holds the CHRA in the exhaust turbine housing.
Turbo will come disassembled (so you can clock it to your liking, will also save you some cursing later) but all hardware will be included sans banjo bolts and oil fittings and clamp plate thing
$70 plus shipping
Next is a T3 garrett M27 I bought used from ebay. Seller said it was off of an SR20 but I dont think so. To be honest its pretty knackered. There are cracks in the exhaust turbine housing, and it looks like its seen better days. Turbo has shaft play and will probably need a rebuild. Compressor housing may be alright, havent cracked it open to see.
The stampings on the plate read
756776
466954-2
0L0195F TBO357
raised lettering on the turbine housings read:
Exhaust: M4 A/R48 F45D87 DH4
Compressor: GARRETT M27 BCC1 A/R 42
$20 plus shipping
Megastim v2.21: used it a few times to flash software/tunes, havent used it since
$50 plus shipping
First up is a saab turbo from a saab 9000 (I think, what I was told anyways)
The good: turbo is in pretty great shape. Shaft play is negligible. I had planned on using this one on my car, but the flanges are odd.
The bad: missing one of the clamp-plate things that holds the CHRA in the exhaust turbine housing.
Turbo will come disassembled (so you can clock it to your liking, will also save you some cursing later) but all hardware will be included sans banjo bolts and oil fittings and clamp plate thing
$70 plus shipping
Next is a T3 garrett M27 I bought used from ebay. Seller said it was off of an SR20 but I dont think so. To be honest its pretty knackered. There are cracks in the exhaust turbine housing, and it looks like its seen better days. Turbo has shaft play and will probably need a rebuild. Compressor housing may be alright, havent cracked it open to see.
The stampings on the plate read
756776
466954-2
0L0195F TBO357
raised lettering on the turbine housings read:
Exhaust: M4 A/R48 F45D87 DH4
Compressor: GARRETT M27 BCC1 A/R 42
$20 plus shipping
Megastim v2.21: used it a few times to flash software/tunes, havent used it since
$50 plus shipping
Last edited by mellowout; 11-10-2012 at 12:26 AM.
Thread
Thread Starter
Forum
Replies
Last Post