91 Turbo Partout
 

Hey All,

My fiance wrecked my car yesterday. Spun it entering the freeway when she hit a patch of black ice and hit the center divider on the driver side. Bumper, fender, door, mirror, subframe, steering rack and radiator are all ruined. Everything else seems to be fine. I drove it home and it ran just fine. Didn't even over heat. I've been falling out of love with the car lately anyway. I haven't even autocrossed the thing in a year and a half. I really want to build a rally car so i'm going to use these funds to facilitate that.

Pics will trickle in of what I have and what I can take pictures of on the car. Parts will start coming off and shipping next week. Prices not including shipping unless otherwise stated. All parts for 1.6 unless otherwise noted.

Turbo Kit: Sold


Megasquirt II:
Sold

LC1 and Blue DB gauge:
Sold

Toyota Cops:
Not PNP, you'll have to wire in the weatherpack connector that I used. Comes with mounting bracket. Pics later today. 200 shipped
https://www.miataturbo.net/attachmen...ine=1325271021
https://www.miataturbo.net/attachmen...ine=1325271021

RX7 550cc Injectors:
Sold

Rear end:
Sold

Roll Bar:
Sold


Hard Dog Door Bars:
sold

Engine:
Sold

Trans:
5-speed. No grinds. Some bearing noise. 100 bucks

Suspension:
SD Revalved Bilsteins with 550 front, 350 rear springs. FCM Top hats, bumpstops, spring isolators, threaded collars. I love this suspension. Its the only thing that makes me want to fix and keep my car but I just need to keep focused on greener pastures. I'll get pics of the full coilover when I get them off. Here are pics of the shocks and the shock dyno. 1200 shipped obo
https://www.miataturbo.net/attachmen...ine=1324670579
https://www.miataturbo.net/attachmen...ine=1324670579
https://www.miataturbo.net/attachmen...ine=1328220820
https://www.miataturbo.net/attachmen...ine=1328220820

1.8 Brakes:
I will sell the Hawk HPS pads, rotors and caliper brakets for all 4 wheels for 150 bucks shipped. Pics next week when they're off the car.
https://www.miataturbo.net/attachmen...ine=1328220820

Front pad sample (~6mm on front pads still)
https://www.miataturbo.net/attachmen...ine=1328220820

Rear pad sample (~6.5mm on rear pads)
http://img.photobucket.com/albums/v6...r/DSC04050.jpg

Hardtop:
sold

Soft Top:
Purchased from ebay, dont remember the seller name. Its vinyl, has rain gutters above the windows (awesome) and is in great shape and fits great as well. Comes with frame. 200
Attachment 186287
Attachment 186288
Attachment 186289

There will be more bits and bobs as I get the car apart and post up little things here and there. Stay tuned for pics and updates. All prices OBO but low-ballers will be kicked squar in the nuts.

interested in LC1!!

Paypal via MP please!!

Any interest in parting the turbo from the kit? If so let me know

Very, very, very interested in the roll bar if you'll ship it.

We'll see about parting the turbo kit. I'd rather sell it whole. We'll see how interest in the various parts works out.

Viper, I may be interested in shipping the rollbar. I've seen it done many times.

As a reminder, most parts wont start coming off until next week.

Im a taker immediately for the turbo manifold. Money ready, tell me your price. Paypal paid within 24hr if price is good...

ill take the lc1 if the first guy backs out!

2nd claim on roll bar for localish pick up. Might have an interested buyer.

Wish I could afford the turbo setup, think I found a crack in my downpipe.

YHPM on engine, dibs

Also interested in the rollbar if the two yahoos above fall through.

Will meet you IRL for IRL pickup, yo!

I will take the door bars
pm sent!

I might be interested in the breaks if I have cash left over from my MS3X purchase.

Interested in the hardtop and passenger fender. YGPM

Also, how much for the hood and driver door?

Hey Guys,

There has been a ton of local interest in these parts. Locals definitely get first dibs. I've updated the original post with things that are pending sale or pretty much as good as sold.

Replied to some PMs.

Hrmmmm suspension.

I'm glad no one was hurt. We're going to miss you around here if you give up the turbo Miata bug.

i am interested in the brakes

driver fender and front bumper shipped to 07922?

Come on men, sell me the turbo manifold, please!! Im a serious buyer.

Que?!

Do you want the turbo and downpipe too? If so, then we can talk. The downpipe is worthless without this custom manifold. Also, unless you have fab skills, the manifold is useless without the downpipe.

ebomb21: the bumper and driver fender are ruined but there yours if you want them.

Happy Kwanzaa everybody.

Any idea on how much for the passenger fender? I am semi-local, Seattle.

50 bucks?

Sold, YGPM

The downpipe flange on a SR20 T25 is very different compared to the RB26DETT R33 T25 im using, the downpipe doesn't fit my turbo. I can confirm from the pictures you've taken the manifold would work in my application, though.

PM'd you on the MS.

injectors, something something something-2020's? I'll take em.

How much for the instrument cluster hood/ are all the clips in tact?

interested in the turbo setup, and i am in portland oregon... 93 miata.

Any updates on the roll bar? Also, if you're stripping this car down, I'd be interested in the carpet assuming it's in a good shape.

im also intrested in the turbo setup complete..how does the clutch, flywheel look ?? might have a need for that as well. thanks don

Pics of the rollbar going up in about an hour. Its finally not raining so I can put the top down and take pictures.

The carpet is alright, i'd say its worth about 30 bucks plus shipping to me. I'll snap pics of it as well.

dondescy: the clutch and flywheel are a 1.8 mazda value replacement and its never let me down even at 14psi of boost on the 1.6. 80 bucks plus shipping and its yours. Not sure when i'll have time to extract it though.

I've been trying to keep up on the PMs and emails so sorry if I haven't gotten back to you about something. Just send another PM/email and i'll get back to you this time. I just finished the GSR swap in my girlfriend's integra so my time is all getting focused on this car now until I get it finished.

First post updated with new pics and pics of the roll bar. Forgot to get a pic of the carpet, viper.

Dude, I was all excited for carnage pictures. Might wanna list the wheel and knob, those are popular items.

They are going in the GTX =P

The carnage is hardly noticable up top. Its mostly underneath. A pole shreaded one of the steering rack mounts both on the rack itself and the subframe. Pretty sure it bent the rack.

I just realized today something that has pissed me off most about the whole situation. There's still 3/4 tank of premium in that bastard! Since our integra now takes only premium (GSR swap) i'm going to get that shit out one way or another lol.

you need 6' of fuel line, vise grips, and a paperclip in the diagnostic box. Problem solved.

Edit: and if I don't see some f'ing pictures of some f'ing bent metal I'm going to be f'ing mad.

wayne_curr, please respond when you get a chance so we can coordinate Thursday. Your message box may be full?

Still wating on you to send your email for paypal?

He had a trip down to Portland (4.5hr drive) this weekend, give him some time to recover and answer a million emails.

Yes, thank you for giving them the heads up. I also had to go to work as soon as I got home so i've had no computer time today until now.

PMs and emails answered.

Have tail lights? No cracks, etc

I need a radio and the radio trim piece, do you still have them and how much? (it would be shipped to 92603)

Thanks- Joe

the springs on the coilovers look miss matched. can you tell me the length of both sets?

They are both 7" springs. Fronts are 550 and rears are 350.

Updated original post. Torsen swap and roll bar sold today.

Megasquirt buyer flaked so its still for sale. Cops, suspension, trans, 1.8 clutch assembly/flywheel, various interior parts, etc. If you need something off a 91 miata let me know, I probably still have it.

As far as the soft top goes, does it have everything I would need to replace mine? I'm assuming frame means all the moving parts? (sorry if that doesn't make sense)

It has everything you'd need except for the rain rail. I patched my rain rail up when I replaced this top and doubt it will last through another install. You might be able to reuse yours as well.

The rain rail is what channels the rain around the edge of the top into the gutters behind the seatbelt pillars. I replaced the old one because it was old and shitty.

What is a rain rail? Also why did you have to replace this one?

Very interested in it, I don't get home until end of the month so if it's still available then I'll hit you up. I want to make sure I need to replace mine first.

Pm sent on the MS.
Thanks.
Josh.

in my experience Rain Rails are very brittle and only last until you replace your top. But Anton managed to still reuse his.

Is the complete turbo kit mentionned in the first post sold???

Not yet but it has become less "complete" since i discovered the intercooler was destroyed in the accident. pm me if youre interested in working out a deal.

I am interested in the turbo set up. My email is mopiwrestler112@aol.com. Thanks.

Bump for a good guy. Picked up the Torsen and Rollbar from him at his place. Thanks again!

hey interested in the turbo kit if not already sold. email is xdeveto@gmail.com

Payment sent for turbo

Ok, turbo stuff sold. Engine sold.

Suspension, brakes, and soft top still for sale!

Bump for good seller.
Got stuff exactly when he said I would and the stuff was exactly as described. Real smooth

Bump, Super solid friend of mine. He is very honest and easy to deal with. Buy his parts!

Looking for passenger side head light cover. Shipped to 80013. will fit in one of the post office flat rate boxes....Let me know