Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Miata parts for sale/trade (https://www.miataturbo.net/miata-parts-sale-trade-5/)
-   -   '93 Base Part Out (https://www.miataturbo.net/miata-parts-sale-trade-5/93-base-part-out-79490/)

Midtenn 06-12-2014 05:20 PM

'93 Base Part Out
 
30 Attachment(s)
I picked up this ’93 base trim with the intentions of putting it back together and selling it as a whole. Unfortunately a 14yr old kid with no mechanical guidance rebuilt the motor, so I don’t feel it’s worth the headache. The long block is probably only good for a core or a rebuild project. The body is pretty straight. The doors have multiple door dings, but don’t appear to have any major damage. The soft top is trash. Only thing worth saving is the frame. If you need a part and don’t see it listed below, let me know and I may have it in one of the boxes they gave me of parts. I am located in Murfreesboro, TN for any parts you would like to pick up. Contact me via PM or email (ishroadkill@hotmail.com)

AC Controls: $35.00 shipped
Alternator: $65.00 shipped
Axles: $50.00 + shipping
Clock Spring: $20.00 shipped
Control arm (Front Upper): $50.00ea + shipping
Control arm (Rear Upper): $10.00ea + shipping
Damper/Springs: $100.00 + shipping
Doors: $100.00ea (pick-up only)
ECU kick panel: $25.00 + shipping
Engine long block: $100.00 (pick-up only)
Rear bumper cover: $100.00 + shipping via Grey Hound
Rear finish panel: $125.00 + shipping
Hood: $150.00 (pick-up only)
Rear uprights: $30.00 + shipping
Pass. side seat: $75.00 + shipping
Drv. side seat: $50.00 + shipping
Speedo sender: $25.00 + shipping
Tail lights: $50.00ea + shipping
Transmission: $100.00 (pick-up only)
Pass side manual window regulator: $40.00 + shipping

Crappy cell phone pics:

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

https://www.miataturbo.net/attachmen...ine=1402608027

supercooper 06-12-2014 05:24 PM

How much dost thou think Shipping would be for the trunk and drivers side Fender shipped to 15038????

supercooper 06-12-2014 05:27 PM

It would take me 2 Tanks of gas to get there and back im thinking... Trying to see if shipping would be cheaper. haha

zerogt86 06-12-2014 08:36 PM

Are the tabs on the gauge hood broken?

Midtenn 06-12-2014 09:46 PM


Originally Posted by zerogt86 (Post 1139574)
Are the tabs on the gauge hood broken?

The gauge hood is already pending, but the tabs are still there

zerogt86 06-12-2014 09:47 PM


Originally Posted by Midtenn (Post 1139605)
The gauge hood is already pending, but the tabs are still there

Ok. If it falls through, please let me know!

curly 06-13-2014 11:52 PM

Can you verify the pulley hasn't slipped by checking mechanical TDC, and making sure it points to the T on the timing cover?

If it does, I want the pulley.

MercuryCross 06-14-2014 01:29 AM

what condition is the relay that connects the water temp fan switch and guage engine temp sensor on the back of the block by the firewall, is it good?

curly 06-14-2014 09:35 AM

You'll have to be more specific, as even I don't know what you're talking about.

Do you want the aluminum cover? Or some electrical relay that connects the temp gauge sensor and ECU temp sensor?

MercuryCross 06-14-2014 02:12 PM

The 2nd, it's the electrical relay

willardmiata 06-14-2014 07:22 PM

dash and steering rack
 
I would like to buy the dash and steering rack. My email lito_madrigal@yahoo.com i will pay for shipping.

Midtenn 06-14-2014 08:32 PM


Originally Posted by curly (Post 1139908)
Can you verify the pulley hasn't slipped by checking mechanical TDC, and making sure it points to the T on the timing cover?

If it does, I want the pulley.

I'll check it tomorrow when I pull the CAS sensor.


Originally Posted by MercuryCross (Post 1139922)
what condition is the relay that connects the water temp fan switch and guage engine temp sensor on the back of the block by the firewall, is it good?

Can you take a picture of what you need? I'm still a little confused.

Pocafocus 06-15-2014 12:33 AM

Do those fenders fit a 99?

Midtenn 06-15-2014 10:47 AM


Originally Posted by Pocafocus (Post 1140024)
Do those fenders fit a 99?

They will not.

Headlight motors, cam angle sensor, driver side regulator, coil pack, ignitor, and AFM are sold.

Monk 06-17-2014 10:12 AM

Dibs on steering will. Pm coming.

ScottyP3821 06-17-2014 01:21 PM

If you did decide to ship the hood. I am interested in the hood and fender shipped to 78132.

curly 06-17-2014 02:02 PM

Did you ever check on the pulley?

Midtenn 06-17-2014 02:52 PM


Originally Posted by curly (Post 1140774)
Did you ever check on the pulley?

Not yet. Its not looking good so far. I have to find a backing to check it against though.

dieselmiata 06-17-2014 02:59 PM

Is it worth your time/money to bother with a shipping quote for the passengers side seat belt receptacle shipped to 60073?

Midtenn 06-17-2014 08:31 PM


Originally Posted by dieselmiata (Post 1140803)
Is it worth your time/money to bother with a shipping quote for the passengers side seat belt receptacle shipped to 60073?

It is. $23 shipped.


All times are GMT -4. The time now is 05:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands