Notices
Miata parts for sale/trade Buy, trade or sell your Miata parts here.

94 R part out

Thread Tools
 
Search this Thread
 
Old Feb 6, 2012 | 05:20 PM
  #1  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default 94 R part out

Pretty much anything that doesn't entail drivetrain or suspension for sale.

Hard top, black, SOLD It is a $300 hard top. Some chips, one rear latch broken off, has inside front and side latches, rear defroster and full headliner. Seals are bad and were "repaired" with some sealant. No shipping.

Rear finish panel, black $150. Pretty much perfect. No chips or cracks, paint scuffed off inside the license plate area about 1/8" x 1/4". I hate shipping these things. I'd have to figure out a shipping cost.

Pics to be posted along with more parts, but throw up what you are looking for and I'll likely have it.

Radio surround SOLD
Gauge Bezel SOLD

I also have other NA and NB parts left over from seven other part-outs but very few motor parts.

NB trans $100 picked up, $150 + shipping if you want it shipped.

NB top hats SOLD, bump stops included if you want them

Lots of parts. Let me know what you want.

Last edited by Stein; Feb 10, 2012 at 02:38 PM.
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 07:03 PM
  #2  
gearhead_318's Avatar
Elite Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 3,966
Total Cats: 21
From: SoCal
Default

I'll take the hard top if you decide to ship, I'll pay shipping.
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 08:14 PM
  #3  
gearhead_318's Avatar
Elite Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 3,966
Total Cats: 21
From: SoCal
Default

Also looking for a front lip, I PM'd a guy on CR.net, but his isn't perfect and I'd prefer to buy from MT users.
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 08:17 PM
  #4  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Originally Posted by Gearhead_318
Also looking for a front lip, I PM'd a guy on CR.net, but his isn't perfect and I'd prefer to buy from MT users.
I will get pics tonight.
Leave a poscat 1 Leave a negcat
Old Feb 6, 2012 | 09:17 PM
  #5  
dstn2bdoa's Avatar
Senior Member
iTrader: (18)
 
Joined: May 2008
Posts: 988
Total Cats: 8
From: Big Bear Ca
Default

Guage cluster hood for my 90. Shipped to 92314.
Dumb friend broke mine trying to get his fat *** out of my car.
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 10:04 PM
  #6  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Originally Posted by dstn2bdoa
Guage cluster hood for my 90. Shipped to 92314.
Dumb friend broke mine trying to get his fat *** out of my car.
I understand that 90-93 is different from 94-97. Sorry, I can't help on that unless I am mistaken.
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 10:26 PM
  #7  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

94 Rear tail lights. $40 each shipped, buy both for $70 shipped.



94 Gauge Hood, perfect, all clips intact and present SOLD




Universal power antenna. SOLD



Black 94 Finish Panel. Cleaned up a bit. No chips or cracks, paint is fair. Would come back OK with a buff $150. I have shipped two, ate one due to shipping damage and hate shipping these so I would have to figure shipping cost.





Radio Bezel, good condition, all intact, SOLD



94R front chin spoiler. Has scuffs but not cracked our gouged. Would sand out nicely if you want to paint it. Cheaper than I found used elsewhere. SOLD





Underside



Metal sill plates with plastic carpet edge covers Nice used condition. SOLD



Lots more stuff, let me know what you are looking for.
Attached Thumbnails 94 R part out-img-20120206-00043.jpg   94 R part out-img-20120206-00041.jpg   94 R part out-img-20120206-00042.jpg   94 R part out-img-20120206-00044.jpg   94 R part out-img-20120206-00039.jpg  

94 R part out-img-20120206-00038.jpg   94 R part out-img-20120206-00037.jpg   94 R part out-img-20120206-00053.jpg   94 R part out-img-20120206-00046.jpg   94 R part out-img-20120206-00045.jpg  

94 R part out-img-20120206-00048.jpg   94 R part out-img-20120206-00054.jpg  

Last edited by Stein; Feb 16, 2012 at 08:43 AM.
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 10:52 PM
  #8  
kenzo42's Avatar
Elite Member
iTrader: (6)
 
Joined: Sep 2007
Posts: 2,017
Total Cats: 13
From: CA
Default

I know you mentioned no suspension, but:

1) R tie rods?
2) rear sway bar?
3) 15" bbs wheels?
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 11:18 PM
  #9  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Originally Posted by kenzo42
I know you mentioned no suspension, but:

1) R tie rods?
2) rear sway bar?
3) 15" bbs wheels?
1) keeping
2) keeping
3) didn't have. I do have some very SWEET 17 x 7.5 and 16 x 7 Superior wheels that came on it, though. I'm sure you would be interested in this fine DUAL staggered (width AND diameter) setup. Don't make me post pics. I don't want to blow up mt.net with all of the traffic.
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 11:22 PM
  #10  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Let me make it a bit easier. If it is in this pic, for sure it's not for sale, along with some additional parts that aren't pictured.



Every bit of that pic is going into the SAAB.
Attached Thumbnails 94 R part out-img_6843.jpg  
Leave a poscat 1 Leave a negcat
Old Feb 6, 2012 | 11:30 PM
  #11  
chpmnsws6's Avatar
Elite Member
iTrader: (12)
 
Joined: Apr 2008
Posts: 2,712
Total Cats: 25
From: Springfield IL
Default

What about the entire dash minus the cluster?

I'm tempted to just ditch this 90-93 dash in favor of the newer one.

The door sill plates- Aluminum? Will they cover the areas that get scratched to hell from the 6 point harness?

Just pay extra for insurance when shipping the finish panel so if they crack it playing football with it, its worth your time to collect.
Leave a poscat 0 Leave a negcat
Old Feb 6, 2012 | 11:49 PM
  #12  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Originally Posted by chpmnsws6
What about the entire dash minus the cluster?

I'm tempted to just ditch this 90-93 dash in favor of the newer one.
I can make you a deal. If you aren't in a hurry, I'll meet you in St Louis the next time I'm in town and have my truck and you can have it. Free delivery. You can buy me a beer if you want. They have zero resale value.

Originally Posted by chpmnsws6
The door sill plates- Aluminum? Will they cover the areas that get scratched to hell from the 6 point harness?
Yes, they are aluminum and they do wrap around the first ledge but not the complete outer ledge. I can get a pic on the car if you are interested. That said, I may have to see if they fit an NB now for the very same reason, lol.

Originally Posted by chpmnsws6
Just pay extra for insurance when shipping the finish panel so if they crack it playing football with it, its worth your time to collect.
Hopefully a local that wants it comes through this week. Makes all of my issues go away.
Leave a poscat 0 Leave a negcat
Old Feb 7, 2012 | 12:01 AM
  #13  
chpmnsws6's Avatar
Elite Member
iTrader: (12)
 
Joined: Apr 2008
Posts: 2,712
Total Cats: 25
From: Springfield IL
Default

That's cool, I can meet you down there sometime. Need to anyway. Let me know what you want for the gauge hood, radio surround and door cards (to get rid of my huge handles on the 90). If you don't end up with the sill plates on the NB, let me know.

Again, no rush on any of it. If weather stays the way it is, the car MIGHT come out, but its perfectly drivable as is. I'll have to ask around the hospital about good food in the STL area.... We NEVER head down that way.
Leave a poscat 0 Leave a negcat
Old Feb 7, 2012 | 12:06 AM
  #14  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Door cars were both missing when I got it. Sorry.

I do have two pull handles that were bolted in even tough the door panels were missing. I don't know if the spacing is the same 90-93 and 94-97 or not. I can bring them along as well.
Leave a poscat 0 Leave a negcat
Old Feb 7, 2012 | 12:44 AM
  #15  
btabor's Avatar
Senior Member
iTrader: (3)
 
Joined: Oct 2008
Posts: 610
Total Cats: 12
From: Indianapolis
Default

Im interested on the hardtop. I would like to see some pictures first. If I like it I'll drive to Nebraska and pick it up!
Leave a poscat 0 Leave a negcat
Old Feb 7, 2012 | 08:46 AM
  #16  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Originally Posted by btabor
Im interested on the hardtop. I would like to see some pictures first. If I like it I'll drive to Nebraska and pick it up!
I'll take some and email them to you tonight, as well as post them here.
Leave a poscat 0 Leave a negcat
Old Feb 7, 2012 | 03:32 PM
  #17  
kjr50's Avatar
Junior Member
iTrader: (5)
 
Joined: Jul 2008
Posts: 86
Total Cats: 0
From: CA
Default

R-pkg trunk lid spoiler? How's the conds, hardware, and shippped to biz add(91710)?
Leave a poscat 0 Leave a negcat
Old Feb 7, 2012 | 03:56 PM
  #18  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Radio bezel, gauge hood, projector headlights, TSI's and manual mirrors all sold.
Leave a poscat 0 Leave a negcat
Old Feb 7, 2012 | 04:00 PM
  #19  
Stein's Avatar
Thread Starter
Elite Member
iTrader: (46)
 
Joined: Dec 2007
Posts: 4,729
Total Cats: 166
From: Nebraska
Default

Originally Posted by kjr50
R-pkg trunk lid spoiler? How's the conds, hardware, and shippped to biz add(91710)?
Condition of the spoiler itself is good. No cracks or damage. Condition of the paint? Well, you will need to sand and respray. Sometime in its life the owner splatter painted the black spoiler with silver paint.

It would come with all necessary hardware required to mount it. I'll include the third brake light with the sale at no charge. $100 shipped.
Leave a poscat 0 Leave a negcat
Old Feb 7, 2012 | 04:06 PM
  #20  
TwoScoopsofHooah's Avatar
Junior Member
iTrader: (2)
 
Joined: Aug 2006
Posts: 222
Total Cats: 0
From: Louisville Kentucky
Default

Would you happen to have side mirrors?
Leave a poscat 0 Leave a negcat



All times are GMT -4. The time now is 12:17 PM.