AbsurdFlow Artech MS RS3 6UL Sparco goodies
#24
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: Cary, NC
Posts: 494
Total Cats: 6
Bump. Had a few people semi interested in the turbo setup but nobody committing. Just think, if someone buys my turbo setup, they are helping so many other people out by releasing the rest of the parts for sale! be a hero! buy my turbo setup!
#28
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: Cary, NC
Posts: 494
Total Cats: 6
Doward: You know you wannnnnaaaaaa. This thing is a blast. I just get more excitement out of the challenge of the actual build than just driving around in it.
ClubSport: Nothing has been sold. Stop spamming. I have clearly stated nothing will be sold until the turbo kit goes. You even quoted me saying something that alluded to that fact..
ClubSport: Nothing has been sold. Stop spamming. I have clearly stated nothing will be sold until the turbo kit goes. You even quoted me saying something that alluded to that fact..
#32
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: Cary, NC
Posts: 494
Total Cats: 6
So I just received payment fo the turbo/exhaust components. So the following is now for sale:
EMAIL PREFERRED FOR CONTACT, PM BOX GETS FULL TOO QUICKLY AND I LIKE HAVING WHOLE CONVERSATIONS SAVED
CBDAVIS@NCSU.EDU
-Buyer to cover shipping costs-
Sheesh those parts went fast...
Wheels/Tires (local pickup preferred, otherwise shipping costs covered by buyer)
$1000 (PENDING)
MS2
$500(SOLD)
Intercooler/Piping/BOV/Couplers
$200
550 Injectors (five-0)
$200(SOLD)
MTX-L
$150(SOLD)
Innovate G2 Analog boost gauge
$50(SOLD)
The rest of the car may be sold as a roller to someone local so it is all staying together for now.
EMAIL PREFERRED FOR CONTACT, PM BOX GETS FULL TOO QUICKLY AND I LIKE HAVING WHOLE CONVERSATIONS SAVED
CBDAVIS@NCSU.EDU
-Buyer to cover shipping costs-
Sheesh those parts went fast...
Wheels/Tires (local pickup preferred, otherwise shipping costs covered by buyer)
$1000 (PENDING)
MS2
$500(SOLD)
Intercooler/Piping/BOV/Couplers
$200
550 Injectors (five-0)
$200(SOLD)
MTX-L
$150(SOLD)
Innovate G2 Analog boost gauge
$50(SOLD)
The rest of the car may be sold as a roller to someone local so it is all staying together for now.
Last edited by rigidbigelsworth; 01-06-2014 at 10:10 AM.
#34
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: Cary, NC
Posts: 494
Total Cats: 6
Oh sorry I forgot to read your mind before I sold it to someone else. My fault.
Besides, your previous PM's included asking for the turbo kit MINUS the turbo,even though I made it VERY clear I would not be separating anything, Then no response for weeks..so my apologies for not considering you a serious buyer...
Oil/water lines for sale as well. CHRA fittings are staying with turbo, but lines are all available. Stainless oil feed -3AN, rubber oil drain with 45° -10AN and straight -10AN fittings, and silicone water lines with 90 degree fittings
(lines bought from Abe)
make me an offer
Besides, your previous PM's included asking for the turbo kit MINUS the turbo,even though I made it VERY clear I would not be separating anything, Then no response for weeks..so my apologies for not considering you a serious buyer...
Oil/water lines for sale as well. CHRA fittings are staying with turbo, but lines are all available. Stainless oil feed -3AN, rubber oil drain with 45° -10AN and straight -10AN fittings, and silicone water lines with 90 degree fittings
(lines bought from Abe)
make me an offer
#36
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: Cary, NC
Posts: 494
Total Cats: 6
No worries. Just didn't want people thinking you were mad because I screwed you over or something.
You could still buy the intercooler and piping since you know it will be a direct fit for this setup if you end up getting one elsewhere :P
Gauges, oil/water lines, IC/BOV/Piping (some additional couplers and tubes will come with it that were left over) all still for sale.
You could still buy the intercooler and piping since you know it will be a direct fit for this setup if you end up getting one elsewhere :P
Gauges, oil/water lines, IC/BOV/Piping (some additional couplers and tubes will come with it that were left over) all still for sale.
#37
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2010
Location: Cary, NC
Posts: 494
Total Cats: 6
Adding some pictures of what is remaining:
Oil lines:
feed -3 AN stainless
drain -10AN on silicone (one 90* one straight)
water: (2x) rubber hoses with 90* angles
(these are the parts Abe supplies in his kits)
Make me an offer, willing to split up pieces
Intercooler setup
CX racing cooler
greddy style BOV(worked fine for me at 14PSI)
AIT bung and sensor/wires
Piping mostly done for you already, Ill include a couple extra pieces of tubing and couplers
Make an offer
Headlight motors
Both work, just tested them yesterday
Make an offer
90-93 seat belts(No receivers)
I bought these when I needed to get rid of my 94 seats and buckles in favor of the 90-93 buckles and it turned out my 94 belts worked with the 90-93 buckles. The safety folded webbing is still in tact.
Make an offer
I have some stock wheels and tires with a lot of tread left I may part with, not desperate to sell these as I may need them to sell the car as a roller but if there is serious inerest I may part with them too.
Oil lines:
feed -3 AN stainless
drain -10AN on silicone (one 90* one straight)
water: (2x) rubber hoses with 90* angles
(these are the parts Abe supplies in his kits)
Make me an offer, willing to split up pieces
Intercooler setup
CX racing cooler
greddy style BOV(worked fine for me at 14PSI)
AIT bung and sensor/wires
Piping mostly done for you already, Ill include a couple extra pieces of tubing and couplers
Make an offer
Headlight motors
Both work, just tested them yesterday
Make an offer
90-93 seat belts(No receivers)
I bought these when I needed to get rid of my 94 seats and buckles in favor of the 90-93 buckles and it turned out my 94 belts worked with the 90-93 buckles. The safety folded webbing is still in tact.
Make an offer
I have some stock wheels and tires with a lot of tread left I may part with, not desperate to sell these as I may need them to sell the car as a roller but if there is serious inerest I may part with them too.
Thread
Thread Starter
Forum
Replies
Last Post
mikeflys1
Miata parts for sale/trade
15
10-27-2018 02:19 PM