Another 3.63 ring and pinion set
This is the last piece I have (for this week) :laugh:
In perfect condition and with 70k miles on it. I am asking the usual, 450$ shipped anywhere in the world. |
I'll take it just as long as it doesnt get lost in the mail
|
It's yours then. You have a pm.
|
SOLD thanks
|
So fast every time! I don't even get a chance to check my paypal balance before it's gone :vash:
|
Originally Posted by JStoops
(Post 1395025)
So fast every time! I don't even get a chance to check my paypal balance before it's gone :vash:
good seller |
Wow $450... Here in Aus I bought one for $5 :-P
Thats like 32cents given our dollar is so crap at the moment. |
Yea, we looked into this before and shipping was $445 LOL you could make some money if you could get them shipped to the us cheap!
|
Originally Posted by HHammerly
(Post 1397004)
Yea, we looked into this before and shipping was $445 LOL you could make some money if you could get them shipped to the us cheap!
|
I will have another set next week. :)
|
Originally Posted by shuiend
(Post 1397096)
Yep the shipping from Aussieland to the US killed it being viable to move a few over.
|
Originally Posted by ridethecliche
(Post 1397243)
Might be worth it to get a container full and ship it over that way hahaaha.
|
whats the weight of the package? it should not be more than $150 to ship via regular mail service.
|
Now to resell and profit - just kidding! Thanks man :bigtu:
|
Thanks for the feedback :D
|
Originally Posted by gianic
(Post 1397391)
Thanks for the feedback :D
|
so 12-14 lbs box roughly.
I ship packages from USA to Australia via USPS and UPS and its about $100-120 for that kind of weight. It cant be much more going back the other way into USA. If a good source of 3.63 can be found, there is money to be made. |
Originally Posted by borka
(Post 1397431)
so 12-14 lbs box roughly.
I ship packages from USA to Australia via USPS and UPS and its about $100-120 for that kind of weight. It cant be much more going back the other way into USA. If a good source of 3.63 can be found, there is money to be made. |
Sadly postage in Australia is a bit of a rip. We pay out the wahzoo for just local, or interstate postage... let alone trying to send something overseas.
|
Don't worry guys , I will have two more sets next week for ya.
|
Wish I knew this before, I've been to Victoria twice and my wife has status with the airlines. That means we can check 3 70# bags for free, I am going to bring crappy clothes and toss them next time.
She does business there sometimes, we may get to go again. I will definitely fill my bags with 3.63 R&P's to the weight limit. |
Originally Posted by sonofthehill
(Post 1397682)
Wish I knew this before, I've been to Victoria twice and my wife has status with the airlines. That means we can check 3 70# bags for free, I am going to bring crappy clothes and toss them next time.
She does business there sometimes, we may get to go again. I will definitely fill my bags with 3.63 R&P's to the weight limit. |
Would installing these gear into an open diff turn it into Torsen ? Or are these mainly being installed into existing Torsen ?
|
Originally Posted by phocup
(Post 1398404)
Would installing these gear into an open diff turn it into Torsen ? Or are these mainly being installed into existing Torsen ?
|
It just makes 1st gear usable in a 6 speed, instead of only for towing up a steep grade.
|
Got it. Thanks!
|
Originally Posted by sonofthehill
(Post 1398407)
It just makes 1st gear usable in a 6 speed, instead of only for towing up a steep grade.
|
Originally Posted by phocup
(Post 1398404)
Would installing these gear into an open diff turn it into Torsen ? Or are these mainly being installed into existing Torsen ?
|
Originally Posted by phocup
(Post 1398404)
Would installing these gear into an open diff turn it into Torsen ? Or are these mainly being installed into existing Torsen ?
Some of the torsen ratio differentials often go for less than the others depending on what things are like around you. It's possible to get whatever it is you find near you that's cheap and a proven torsen and then swap this ratio in if that's your longer term goal anyway. If you have questions on how to tell a torsen from an open differential, there are a few good write ups on miata.net. See:https://www.miata.net/garage/diffguide/ |
|
Hmm .. guess it was noob enough a question to be considered trolling. LOL. Appreciate the knowledge though. Thanks.
|
I have one 3.63 set in stock guys and i can ship ASAP at same price 450$ shipped.
Also if you are interested I have in stock two sets of 3.72 ring and pinion for 350$ shipped, from 6spd NC. It fits perfectly in the NB case but you will need some spacers for the perfect adjustment. |
These dudes may have hurt the demand. I suspect if they keep up with demand used 3.6s will be in the $300s. I could be completely wrong as well.
MFactory Competition Products - Performance Driveline Components |
Nice I wonder what the Top speeds in each gear would be with a 3.3 on a 6spd. Might be a bit to tall for a Peaky 1.8 motor though.
|
Originally Posted by Johnny wangwang
(Post 1400447)
Nice I wonder what the Top speeds in each gear would be with a 3.3 on a 6spd. Might be a bit to tall for a Peaky 1.8 motor though.
|
The 3.63 is SOLD. Thanks.
|
Originally Posted by shuiend
(Post 1400452)
The numbers are in the other thread for that.
|
Don't worry, the 3.3's will be sold out by the time you get there. search gearset
|
I thought the purpose of lower gears was top end, not acceleration?
|
FPM, there are like 5 of those units left. I doubt that the blip is going to do anything to affect prices of the 3.6. Unless they're something that are in constant supply anyway.
Originally Posted by MstrBlk
(Post 1400520)
I thought the purpose of lower gears was top end, not acceleration?
You can accelerate plenty fast if you have the HP to back it up. |
While I keep staring at that shopping cart and thinking how nice it'd be to cruise at something around 2900 I'll have to exhibit some self control and pass. Would be interested in a group buy though if the price came down a bit.
Somebody please buy the last one so the check mark goes away.... :giggle: |
$625 shipped isn't that bad...I think the 636 will be what I want though.
|
To put it in perspective, the 3.63 gears new from Mazda run you in the $525-575 range.
|
I'll live with the 3.9 for now and watch for a set of 3.63 along the way. I have too much other crap to put together.
|
The 3.63 is the perfect gear for me with the 6speed and 300whp. It is still pulling at 150mph with plenty of room to go faster than I need to go well above that. It also cruises at a really nice RPM at 80mph compared to stock 4.10 gears. It isn't so tall that I need to downshift to make enough power to run up to 90mph to pass another car quickly. And first gear is definitely useful and needed with the 3.63's where it wasn't previously.
|
who will be the man with balls big enough to top out a 6spd 3.63 car? :naughty:
|
Got another 3.63 for sale? I'm hankerin for one.
|
Originally Posted by sixshooter
(Post 1400694)
The 3.63 is the perfect gear for me with the 6speed and 300whp. It is still pulling at 150mph with plenty of room to go faster than I need to go well above that. It also cruises at a really nice RPM at 80mph compared to stock 4.10 gears. It isn't so tall that I need to downshift to make enough power to run up to 90mph to pass another car quickly. And first gear is definitely useful and needed with the 3.63's where it wasn't previously.
|
Originally Posted by Philly Miata
(Post 1401314)
Got another 3.63 for sale? I'm hankerin for one.
|
Originally Posted by MiataMan00
(Post 1401311)
who will be the man with balls big enough to top out a 6spd 3.63 car? :naughty:
|
Hey, definitely interested in a set, I'm doing an exhaustive 1.8 swap into my 90, including a 6 spd. I'm still learning about a lot of this stuff, so my question is, before I take this to a shop to have the gears swapped, is there anything else i should make sure I have to replace in the diff when it gets rebuilt? Wear items or i read something about crush sleeves? I'm doing my homework but requesting a little if possible.
|
So until now the priority is like this.
1. Philly Miata 2. bahurd 3. 4. The sets are now 4 and I will have them in my hands this week or the next. Price stays the same 450$ shipped anywhere in the world. |
Payment sent to the man in the tsarouchia.
|
I only hit 150.x mph at Daytona last time with the 3.63s. I was having other technical problems so I wasn't making full power, only about 250whp. I had plenty of gear left to go faster.
It made me want a full cage rather than a rollbar and door bars. |
Only one set left for the preorder.
1. Philly Miata 2. bahurd 3. Colipto 4. |
I'm in for the fourth set. Group buy price? :naughty:
|
Originally Posted by konmo
(Post 1401501)
I'm in for the fourth set. Group buy price? :naughty:
1. Philly Miata 2. bahurd 3. Colipto 4. konmo As I said I expect the sets this week or the next so please be patient guys! Have a good turbo day :skid: |
Ok guys I am dispatching tomorrow Philly Miata's set. I am expecting the rest this week and will be ready for shipping.
I am having a 5th set next week so feel free to fill with your name on the list. 1. Philly Miata 2. bahurd 3. Colipto 4. konmo 5. |
:party:
|
My heart was broken by the 3.3. Ill take your last 3.6
5. Farpolemiddle eating fucking crow. shoot me your paypal. |
All times are GMT -4. The time now is 01:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands