Notices
Miata parts for sale/trade Buy, trade or sell your Miata parts here.

BEGI 1.8 Log Manifold $289

Thread Tools
 
Search this Thread
 
Old Jul 4, 2012 | 07:33 PM
  #1  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default BEGI 1.8 Log Manifold $289

Hi,

Had this for sale with some other items but things did not work out on the Manifold.

These parts were on my 2002 Miata. I'm building the engine so my car is all apart and I want to take advantage of more than 12 psi so I want more flow


Selling - 1.9 BEGI log manifold with an male EGR tube for other years so this combo should be universal like a soldier.

The EGR tube is needed if you dont have a 99. This manifold has the female EGR bung. Female bungs are only found on some mans. True story bro.

Selling because I'm thinking of going to an S4 system. . It was fine before I took my car apart and has no cracks.

I will be around tomorrow but after that I'm gone until Tuesday the 9th then Tuesday the 9th afternoon I'm gone again until the 16th so please be aware. First come first served, I can only mail it tomorrow or maybe the 9th but for sure on the 16th/17th.

Shipping is about $45 from the great white north. The manifold will be frozed all up being from Canada so allow a few days for it to thaw before installing as to avoid thermal shock.

Asking $289 with the EGR and I'll throw in some glacial Alberta water, though it might melt in transit - cannot confirm the PPM of Calcium or Phosphorus in the water but if you have a gas spectrometer its so easy to tell.
Attached Thumbnails BEGI 1.8   Log Manifold 9-img_1256.jpg   BEGI 1.8   Log Manifold 9-img_1249.jpg   BEGI 1.8   Log Manifold 9-img_1252.jpg  

Last edited by Landrew; Jul 7, 2012 at 01:47 AM.
Leave a poscat 0 Leave a negcat
Old Jul 4, 2012 | 08:07 PM
  #2  
soviet's Avatar
Elite Member
iTrader: (10)
 
Joined: Jan 2010
Posts: 3,493
Total Cats: 269
From: VA
Default

don't need no stinkin' EGR.

Originally Posted by soviet
Poor man's EGR plug for 99-00 manifold. BEGI charges $27.50 for this plug. Or you can use a Doorman 090055 oil drain plug for less than $3....




It doesn't fit all the way in so I might cut off a few mm to make it a flush fit. But probably not nessesary.
Leave a poscat 0 Leave a negcat
Old Jul 4, 2012 | 08:17 PM
  #3  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default

You are so wrong. Suppose in your grandmas will she insists that a percentage of combustion gasses needs to recirculate in cars you own or your cut from the estate but you want a miata (you couldn't purchase one when she was alive because she no like the gays) so then you want to turbo it because you and Anderson Cooper are ok now. What will you do, you'll save hundreds (need that extra $$ to travel to get
"married" in some weird state) and buy my EGR lovin manifold that's what!
Leave a poscat 0 Leave a negcat
Old Jul 4, 2012 | 09:41 PM
  #4  
absRTP's Avatar
Senior Member
iTrader: (12)
 
Joined: Sep 2009
Posts: 516
Total Cats: 0
From: -
Default

Can I have a price for the manifold shipped within Canada

Postal code : J7V 8A7


Thanks

**
How comes now it is $20 more expensive ? then two weeks ago?
Leave a poscat 0 Leave a negcat
Old Jul 4, 2012 | 10:38 PM
  #5  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default

It's still boxed with a drilled oil pan and an AN fitting included. Care for any of that also? If not I'll get an online quote without.

The EGR fitting is now included so I thought I'd reflect that plus summer rates.
Leave a poscat 0 Leave a negcat
Old Jul 4, 2012 | 11:15 PM
  #6  
absRTP's Avatar
Senior Member
iTrader: (12)
 
Joined: Sep 2009
Posts: 516
Total Cats: 0
From: -
Default

Don't need anything else, I'm swapping a B6T for a 2002 BP, I only need the exhaust manifold. Don't need the EGR fitting
Leave a poscat 0 Leave a negcat
Old Jul 4, 2012 | 11:31 PM
  #7  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default

Canada Post says $23 for its weight and dimensions when boxed/wrapped in cardboard.
Leave a poscat 0 Leave a negcat
Old Jul 7, 2012 | 01:11 AM
  #8  
arbinshire's Avatar
Junior Member
 
Joined: Sep 2007
Posts: 83
Total Cats: 2
Default

Originally Posted by Landrew
Suppose in your grandmas will she insists that a percentage of combustion gasses needs to recirculate in cars you own or your cut from the estate but you want a miata
Would violate the rule against perpetuities as it could conceivably occur after 21 years of a measuring life. So, you can tell grandma's will to shove it. See?

$275 without EGR shipped to 82070?
Leave a poscat 0 Leave a negcat
Old Jul 7, 2012 | 01:42 AM
  #9  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default

Shipping is too high a cost to me up here for that offer.

Last edited by Landrew; Jul 7, 2012 at 02:04 AM.
Leave a poscat 0 Leave a negcat
Old Jul 13, 2012 | 02:51 AM
  #10  
dhyde9's Avatar
Newb
 
Joined: Oct 2011
Posts: 27
Total Cats: 0
Default

Originally Posted by Landrew
You are so wrong. Suppose in your grandmas will she insists that a percentage of combustion gasses needs to recirculate in cars you own or your cut from the estate but you want a miata (you couldn't purchase one when she was alive because she no like the gays) so then you want to turbo it because you and Anderson Cooper are ok now. What will you do, you'll save hundreds (need that extra $$ to travel to get
"married" in some weird state) and buy my EGR lovin manifold that's what!
I just want to say... that was an excellent point and it shouldn't go unnoticed. You've persuaded me to the ways of exhaust gas re-circulation.
Leave a poscat 0 Leave a negcat
Old Jul 30, 2012 | 12:15 AM
  #11  
phee's Avatar
Newb
 
Joined: Jul 2012
Posts: 14
Total Cats: -1
From: GA
Default

does the NB manifold fit an NA 1.8? if so, how much shipped to 30080?
Leave a poscat 0 Leave a negcat
Old Jul 30, 2012 | 03:14 PM
  #12  
MiataKeith's Avatar
Junior Member
 
Joined: May 2012
Posts: 73
Total Cats: 11
Default

Still have the tapped oil pan?
Leave a poscat 0 Leave a negcat
Old Jul 31, 2012 | 11:32 AM
  #13  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default

Originally Posted by phee
does the NB manifold fit an NA 1.8? if so, how much shipped to 30080?
I'ts about $40 to ship from Canada so make it $315.
Leave a poscat 0 Leave a negcat
Old Jul 31, 2012 | 11:34 AM
  #14  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default

Originally Posted by MiataKeith
Still have the tapped oil pan?
Yes but we found out the hard way after taking the box to shipper that they want a ridiculous amount for it, like $60 US. Your better off looking local I'd think
Leave a poscat 0 Leave a negcat
Old Sep 18, 2012 | 05:04 PM
  #15  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default

Bump $270 with EGR.


Sorry I cant edit my original post
Leave a poscat 0 Leave a negcat
Old Sep 19, 2012 | 05:58 AM
  #16  
Frank_and_Beans's Avatar
Junior Member
iTrader: (10)
 
Joined: Jun 2011
Posts: 299
Total Cats: 3
From: Detroit Burbs
Default

Does it have a T3 or T25 flange?
Leave a poscat 0 Leave a negcat
Old Sep 19, 2012 | 08:54 AM
  #17  
Landrew's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Sep 2009
Posts: 1,193
Total Cats: 29
From: Edmonton, AB, Canada
Default

T25
Leave a poscat 0 Leave a negcat
Old Sep 22, 2012 | 12:33 PM
  #18  
phillyb's Avatar
Senior Member
iTrader: (8)
 
Joined: Sep 2010
Posts: 1,127
Total Cats: 9
From: misery
Default

cute shoes
Leave a poscat 0 Leave a negcat
Old Sep 29, 2012 | 11:25 AM
  #19  
phillyb's Avatar
Senior Member
iTrader: (8)
 
Joined: Sep 2010
Posts: 1,127
Total Cats: 9
From: misery
Default

is this still available?
Leave a poscat 0 Leave a negcat
Old Sep 29, 2012 | 12:20 PM
  #20  
Faeflora's Avatar
Elite Member
iTrader: (2)
 
Joined: Jan 2007
Posts: 8,682
Total Cats: 130
From: Los Angeles, CA
Default

Originally Posted by Landrew
You are so wrong. Suppose in your grandmas will she insists that a percentage of combustion gasses needs to recirculate in cars you own or your cut from the estate but you want a miata (you couldn't purchase one when she was alive because she no like the gays) so then you want to turbo it because you and Anderson Cooper are ok now. What will you do, you'll save hundreds (need that extra $$ to travel to get
"married" in some weird state) and buy my EGR lovin manifold that's what!

I want to fucky you.

How much just for a pint of glacial water? Does it have Giardia?
Leave a poscat 0 Leave a negcat



All times are GMT -4. The time now is 03:46 PM.