Bolt in BIG BOY intercoolers - NA and NB Vibrant Cores! AFFORDABLE!
10 Attachment(s)
These are bolt on intercoolers for the NA and NB Miata. I bought one initially for my build and figured I could save you guys some money by knocking out a few of these all at once.
These intercoolers are direct bolt on! Material needs to be trimmed from the core support as shown below but can be installed in about 1 hour. They bolt up using factory mounting points already on the car. I really only recommend this size core if you are making over 250 at the wheels. With the use of couplers to accept the 2.5” inlet and outlet, hey are compatible with the Flyin Miata and the BEGi intercooler pipes. Covering the basics: -CORE INTENDED TO SUPPORT 550HP -Bolts to factory mounting points -Compatible with BEGi and FM ic pipe -Compatible with NA and NB Miata. NB with AC has been tested and it fits. Unknown if NA with AC will work but my assumption says yes. -Recommended for 250hp+ -Requires you to remove a small amount of material from your core support. -Fits with factory bumper unmodified. Intercooler specifications: Approx. Flow Rate for this intercooler: 725 CFM at 1.5PSi pressure drop Approx. HP Rating for this intercooler: 550 HP Core Width: 24" (Overall Width with End Tanks: 30") Core Height: 9.25" Core Thickness: 3.25" Inlet Diameter: 2.50" Outlet Diameter: 2.50" Inlet/Outlet Neck Location: Offset Big boy core that really says “I’m not flucking around”: https://www.miataturbo.net/attachmen...ine=1359989067 https://www.miataturbo.net/attachmen...ine=1359989067 Reinforced mounting points. Once bolted up you can really feel how solid the mounting is. This setup is ready for some abuse. https://www.miataturbo.net/attachmen...ine=1359989067 https://www.miataturbo.net/attachmen...ine=1359989067 https://www.miataturbo.net/attachmen...ine=1359989067 Price 300 shipped within the US. Please PM me for details. |
4 gone and one left.
|
i can't wait till this baby shows up at my door!!!!!
|
Payment sent. I can't pass up this opportunity.
I'm probably going to end up working during the weekend, but you're not far away. Text me and i'll drive up there. |
These look great. Hope they'll be around when I'm ready.
|
One more of these is now available. I'm actually working on a smaller version for a guy who decided to switch it up. So one more available guys!
|
Got the last one still?
I'm ready. |
Any interest in a 350hp version that requires no cutting?
|
Why would the 300 be without cutting but this one requires cutting? I might be but not now.
|
Originally Posted by Dot3
(Post 976997)
Why would the 300 be without cutting but this one requires cutting? I might be but not now.
350 = 20in CORE 550 = 26in CORE |
Oh sorry missed that. Yeah but if you have this when I start my build I might.
|
I'd be interested in the tree-fiddy core.
edit: first post! |
Originally Posted by Dem768
(Post 976973)
Any interest in a 350hp version that requires no cutting?
|
Any details on the smaller version? Thanks
|
Originally Posted by bubb
(Post 977314)
Any details on the smaller version? Thanks
Core Height: 6.5 Core Thickness: 3.25 Inlet Diameter: 2.5" Outlet Diameter: 2.5" Inlet/Outlet Location: Center Approx. Flow Rate for this intercooler: 520 CFM at 1.5PSi pressure drop Approx. HP Rating for this intercooler: 350 HP |
1 Attachment(s)
Alright guys – Snapped a picture of the bumper installed. I’ll grab some better pictures when my car is actually rolling again but this really gives you the idea on how well this IC really fills the grill. This is one of the 550HP cores btw.
https://www.miataturbo.net/attachmen...ine=1360590681 |
That looks good, looks clean with wall to wall intercooler.
|
You get my PM? I think this site has been having PM problems lately.
|
Originally Posted by Erat
(Post 977661)
You get my PM? I think this site has been having PM problems lately.
|
Is the 1 still left or are they all gone?
|
All times are GMT -4. The time now is 10:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands