Notices
Miata parts for sale/trade Buy, trade or sell your Miata parts here.

Bunch of NB stuff - mspnp2, begi intake mani, injectors

Thread Tools
 
Search this Thread
 
Old Sep 20, 2015 | 05:27 PM
  #1  
mikeflys1's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Nov 2006
Posts: 359
Total Cats: 0
From: N/A
Default Bunch of NB stuff - mspnp2, begi intake mani, injectors

Sold off my '99 so here I am with all the turbo goodies:

MSPNP2

It was in the car a bit over a year. Not modded at all. I'll also send you my tunerstudio registration. $620 shipped (Sold)









Begi intake manifold setup ( Mazda Miata Intake Manifold 1999-2005 )

Includes ford 4.6 throttle body (65mm), tps, shortened throttle cable, bracket to remote mount the stock iac (its realllly basic but it gets the job done). TB was drilled/tapped for a pre-TB wastegate line. All you need is a tps pigtail, and ideally some forced induction. $650 shipped









A couple Bosch EV14 injector sets

One set is 850cc, direct fit for a miata. Used them about a month - I was a little overzealous and got these when I still had an MS1. Figured out I was better off with a more reasonable sized injector. $100 shipped (Sold)

Second set is 550cc. Need adapters for the harness (included) and spacers on the fuel rail (not included). These were on the car ~2.5 years. $80 shipped (Sold)









Also, I'm located in northwest CT if there's any local interest in anything.
Attached Thumbnails Bunch of NB stuff - mspnp2, begi intake mani, injectors-80-z4irwcg_549e0ba44ef07109aa878d275082f22fc3701afa.jpg   Bunch of NB stuff - mspnp2, begi intake mani, injectors-80-arw5agl_dfd8c335a0a83b879448454bfa5e208c90a4e8bc.jpg   Bunch of NB stuff - mspnp2, begi intake mani, injectors-80-nsvfvhj_1de1356b04576331ba97b99bd39c83c571a228e3.jpg   Bunch of NB stuff - mspnp2, begi intake mani, injectors-80-t9lafvz_cd4694f73e7851e4c2ec7d309e695582aba46a56.jpg   Bunch of NB stuff - mspnp2, begi intake mani, injectors-80-enamo4f_fa8204540cd0b26b3ee68391e3c11f896dbf33e7.jpg  

Bunch of NB stuff - mspnp2, begi intake mani, injectors-80-w442brr_7f688b61428fe048d2078f7f67877120c0217e83.jpg   Bunch of NB stuff - mspnp2, begi intake mani, injectors-80-fcyugav_adb0f5230b6950840737407c4176bb6f3b13460c.jpg  

Last edited by mikeflys1; Sep 25, 2015 at 07:27 AM.
Old Sep 20, 2015 | 05:31 PM
  #2  
wred's Avatar
Junior Member
iTrader: (1)
 
Joined: Nov 2013
Posts: 71
Total Cats: 8
Default

I'll take the 850cc injectors. Pm'd you.
Old Sep 21, 2015 | 12:19 AM
  #3  
ihiryu's Avatar
Junior Member
 
Joined: Jul 2013
Posts: 319
Total Cats: -11
From: TX
Default

If deal falls through I'll take the injectors
Old Sep 22, 2015 | 12:13 AM
  #4  
brucesin's Avatar
Newb
 
Joined: Jul 2015
Posts: 1
Total Cats: 0
From: Bay Area, CA
Default

Does the Megasquirt come with anything else?
Old Sep 22, 2015 | 06:40 AM
  #5  
mikeflys1's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Nov 2006
Posts: 359
Total Cats: 0
From: N/A
Default

Originally Posted by brucesin
Does the Megasquirt come with anything else?
The serial cable, a tunerstudio reg. and the connector for the accessory port (never used).
Old Sep 22, 2015 | 10:19 AM
  #6  
Mazduh's Avatar
Senior Member
 
Joined: Mar 2011
Posts: 697
Total Cats: 27
From: South Chicago
Default

Do the PNP units use the stock harness? My only experience is a rev built unit that came with a harness. Or does this unit not come with an included harness?
Old Sep 22, 2015 | 12:53 PM
  #7  
mikeflys1's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Nov 2006
Posts: 359
Total Cats: 0
From: N/A
Default

Originally Posted by Mazduh
Do the PNP units use the stock harness? My only experience is a rev built unit that came with a harness. Or does this unit not come with an included harness?
Yea, the stock harness plugs right into this one. There's also stock tunes available off the mspnp site to get it running initially.
Old Sep 28, 2015 | 06:37 AM
  #8  
mikeflys1's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Nov 2006
Posts: 359
Total Cats: 0
From: N/A
Default

Bump
Old Oct 5, 2015 | 06:57 PM
  #9  
mikeflys1's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Nov 2006
Posts: 359
Total Cats: 0
From: N/A
Default

Bump
Old Oct 14, 2015 | 07:20 PM
  #10  
mikeflys1's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Nov 2006
Posts: 359
Total Cats: 0
From: N/A
Default

One last bump
Old Oct 15, 2015 | 12:06 AM
  #11  
psyber_0ptix's Avatar
Elite Member
iTrader: (4)
 
Joined: Mar 2012
Posts: 4,648
Total Cats: 544
From: Northern VA
Default

Does this manifold actually help with anything? Do they have any Dyno numbers comparing it to stock or squaretop?
Old Oct 17, 2015 | 09:56 AM
  #12  
mikeflys1's Avatar
Thread Starter
Junior Member
iTrader: (2)
 
Joined: Nov 2006
Posts: 359
Total Cats: 0
From: N/A
Default

Originally Posted by psyber_0ptix
Does this manifold actually help with anything? Do they have any Dyno numbers comparing it to stock or squaretop?
Top end certainly felt a lot better, but I don't have before/after numbers for it on mine.

Begi claims between 20-30whp increase with the stipulation that it be above 270whp already and running >14psi.
Old May 1, 2016 | 09:51 AM
  #13  
bawward's Avatar
Junior Member
iTrader: (3)
 
Joined: Oct 2015
Posts: 329
Total Cats: 22
From: Steamboat Springs, CO
Default

.
Reply
Leave a poscat -1 Leave a negcat
Old Oct 27, 2018 | 01:36 AM
  #14  
freakaccident's Avatar
Newb
 
Joined: Feb 2017
Posts: 27
Total Cats: 4
Default

Anyone have the part number for the filter for this? I don't know how to search for it. I tried multiple times. This thread is large. Help a brother out. Thanks.

EDIT - I lost the stupid filter again and now I am taking a road trip. I have screen filter over the 3d pipe but I can't have that for a road trip going down the Tail of the Dragon. It's a long trip from my home.
Old Oct 27, 2018 | 07:43 AM
  #15  
sixshooter's Avatar
Moderator
iTrader: (12)
 
Joined: Nov 2008
Posts: 22,155
Total Cats: 3,536
From: Tampa, Florida
Default

Originally Posted by freakaccident
Anyone have the part number for the filter for this? I don't know how to search for it. I tried multiple times. This thread is large. Help a brother out. Thanks.

EDIT - I lost the stupid filter again and now I am taking a road trip. I have screen filter over the 3d pipe but I can't have that for a road trip going down the Tail of the Dragon. It's a long trip from my home.
What thread do you think you are in? Maybe that's why you can't find anything.
Old Oct 27, 2018 | 02:19 PM
  #16  
Savington's Avatar
Former Vendor
iTrader: (31)
 
Joined: Nov 2006
Posts: 15,442
Total Cats: 2,106
From: Sunnyvale, CA
Default

@IB Nolan, how many utags in threads that were needlessly bumped due to the new "scrolling" feature will it take for your team to remove it from the site?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
irodd
Miata parts for sale/trade
2
Nov 20, 2017 09:58 PM
braddock01
Miata parts for sale/trade
2
Feb 21, 2017 01:53 PM
irodd
Miata parts for sale/trade
0
Apr 9, 2016 08:26 PM
HardHitter
Miata parts for sale/trade
0
Dec 14, 2013 12:22 PM




All times are GMT -4. The time now is 12:43 AM.