Bunch of parts for sale
The first of many to come(the packrat that I am...)
1024x768 pics: Hag's Spring 2009 Garage Sale HiRes pics: Hag's Spring 2009 Garage Sale Prices: * K&N Cold air intake for 1.6L - used for about 2K miles - $125 * Billet aluminum 1.75" diameter fire extinguisher rollbar mount clamp and plate (fire extinguisher and ext holder NOT included) - $40 * NEW ARP head studs - $SOLD * NEW Begi ceramic coated1.6L turbo exh manifold - (cost $409 + $75 for coating) - $425 * Bipes ACU for timing retard(not sure which rev, I believe 1.5) - $125 * CF head light lids(driver's side ducted) - $SOLD * 90-97 center console(pwr window switch NOT included) - shift boot has some small tears fyi - $20 * 90-97 pwr window switch - $SOLD * FM ceramic coated 1.6L turbo exh manifold(newer design) - ceramic coating has dulled and is flaking off in a few spots, but still better than rust - $375 * FM SS turbo DUAL exhaust - $475 * FM SS turbo SINGLE tip exhaust - $375 * FM voodoo box - $225 * NEW FM turbine outlet ceramic coated and NO interference with turbo WG flapper - opens 100% w/no contact - $250(cost $325 w/coating) * NEW FM SS downpipe(not pictured here) for a 1.8L - $200($20 less than cost) * OEM stock rubber motor mounts in good condition(appears low mileage)- $SOLD * Okuyama/Carbing triangle shock tower brace - can use some cleaning and polishing, but in great condition - BEST STB on the market - $350 shipped in cont. US. * 90-97 power windows - everything you need except for the switch - $SOLD * RS Aizawa HL lids - one in unpainted FRP, the other painted w/ a few small imperfections - matches the '90-93 Crystal white perfectly. Mesh screens can be replaced using hot glue - $250 for both(cost over $350 new w/shipping and does not include mesh) * NEW Moss motors SS cowl cover w/mesh insert - $90 * NEW Sparco Pulsar 310mmx260mm steering wheel - suede w/integrated lap timer memory. This item has not been made for several years and as of 2 years ago it was near impossible to find. Cost $369 new - $350 FIRM. * Sparco Ring D-cut 330mm steering wheel - leather in perfect condition $SOLD * Mazdaspeed black horn button - $SOLD |
How much for the okuyama brace?
|
Originally Posted by minime
(Post 389057)
* Okuyama/Carbing triangle shock tower brace - can use some cleaning and polishing, but in great condition - BEST STB on the market.
|
PM me with a price on the STB, assuming it works with turbo setups.
|
DOH, forgot to put a price for it - sorry fellas. I bought it for $375, but prices have gone up the last couple years - check REV9 Autosport
The only difference between that bar and mine is the integrated Brake MC stopper - oh wait, that was the RSA unit - this is the same one that is currently sold under Carbing/Okuyama. I would sell it for $350 shipped anywhere in the continental US. |
With regard to turbo clearance - it cleared my FM turbo system no problem(new style system with compressor outlet clocked DOWN. I don't remember how much room was above the turbo to allow for a compressor pipe/tube.
|
No PMs? I know you are asking $350 for the Okuyama brace. If you let it go for $250 shipped I'm interested.
|
|
LOL, imitation is the best form of flattery. Seriously though, this brace is the friggin sheit. It is SUPER light, VERY strong and it is a work of art with beautiful welds. The only reason I am selling it is because I have too much crap and not enough $ :), plus I am putting MiniMe completely back to stock because I need a car to leave @ the airport and I don't want it stolen so most of the goodies are coming off the car. I actually have two more of these braces(did I mention I am a packrat/parts-whore?). One of them is the RSA version in anodized orange/gold and the other is the same as this one, but I may end up putting it on the BRG and sell the DIY 3-pt CF brace that Moti created a few years ago.
I posted this several times on m.net over the years - it is the BEST STB on the market, no question: initial impressions: MX-5 Miata Forum - View Single Post - Inexpensive shock tower brace "This brace looks great, is super light, and it WORKS. After installing it, I found that MOST of the squeaks, rattles, and groans on my '93 were eliminated and a almost ALL of them were gone after driving around for a couple days and then re-torquing the connector bolts. Also, this brace took care of the 65mph shimmy, something the FM brace could not." MX-5 Miata Forum - View Single Post - 2-pt shock tower brace vs 3-pt vs unconventional |
How much for the CF headlight lid shipped to the UK
|
I agree it's the best brace on the market. I have the 2nd best, the SC version. It's not completely triangulated.
|
Oh wow, I have three bites on the CF lids - one guy is local and the other two are in Europe. Punch, you are #2 in line behind the local guy - if he does not buy them by tonight I will find out how much it will cost to ship to UK. Shoot me an email(it is listed @ the top of the picture pages).
|
i'm interested in the CF headlight lids (both) and the ARP head studs. maybe we can work a deal or something. get some more posts so you can PM lol
EDIT: I'm in the USA lol |
ok, I enabled PM's - fire away
|
Wow, I REALLY want that brace.
A little rich for my blood right now, but I'm working on it. |
still says you are blocking PM's
|
my bad, I had "receive pm's from contacts or moderators only" checked
|
I've sent you an email with my UK postcode.
Cheers |
pm'd
|
pm'd
Sorry, Double post. |
All times are GMT -4. The time now is 10:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands