BW S252 Turbo
8 Attachment(s)
Left from initial sale.
trying to make it easier to manage through individual posting. Barely used BW S252. No oil leaks or out of spec shaft play. Great turbo for a 1.8, never had the chance to run it past 12 PSI but it spools just as good as a BB turbo. Brand new is 1k Selling for $600 Shipped in the US. Specifications. Borg Warner S252 Turbo also known as the S200SX with 55 lbs/min flow rating ::Compressor:: (cold side) - Wheel: 52mm Inducer / 70mm Exducer w/ Extended Tip Technology - Housing: 3.00" air inlet / 2.50" charge pipe outlet ::Turbine:: (hot side) - Wheel: 69mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation) - Housing: Bullseye Power Stainless Steel 0.55 A/R T3 Exhaust Housing (Custom Ordered and was $400 by itself new) By extending the ends of the compressor wheel, BorgWarner has effectively increased the pressure ratio, efficiency and flow of the entire compressor. Another factor that increases the efficiency of the turbo as well as overall flow is the height of the compressor wheel blades. The BorgWarner extended tip version is over 20% taller than the standard 50 trim. The theory that the longer the air stays on the blades the more boost you can run and the more air it will flow thus improving the aerodynamics of the turbo. This extended tip compressor wheel is rated at more than 55 lbs/min vs. the standard 50 trim at only 49 lbs/min. Compressor Wheel Inducer - 52mm Compressor Wheel Exducer - 70mm Turbine Wheel Inducer - 69mm Turbine Wheel Exducer - 61mm |
I think faefae needs this.
|
Originally Posted by curly
(Post 875811)
I think faefae needs this.
|
I wish I could see a dyno plot of this or at least a boost log on a mazda 1.8:(
|
Originally Posted by 18psi
(Post 875816)
I wish I could see a dyno plot of this or at least a boost log on a mazda 1.8:(
|
Bump?
Come on this is a quality piece. |
Bamp
|
2 Attachment(s)
bump
some more details The S252 is most closely related to the GT3071R. It's rated at 55 lbs/min where the GT3071R is rated at 47lbs min. You can see in the link below where the compressor maps for both are overlayed. The S252 is in red while the GT3071R is in blue and you can see that overall it has better flow characteristics |
O.G is going to be a happy BW owner.
Thanks for the buy. |
i'm guessing this sold?
|
What was the spool at even 12psi like, Mus?
|
Originally Posted by blaen99
(Post 885748)
What was the spool at even 12psi like, Mus?
everybody that had a ride thought it was a BB turbo. between shifts wastegate stayed open, no boost lag. |
Buyer backed out.
4th of July special 550$ shipped in the US |
Nobody wants a fast miata?
bump |
How many miles are on this?
|
Good jehovah why must you tempt me with such things
|
Originally Posted by Dem768
(Post 901425)
How many miles are on this?
perfect condition you can still see the factory marks on the compressor wheel |
Originally Posted by viperormiata
(Post 901431)
Good jehovah why must you tempt me with such things
time to jump on this beast. Honastly 1/2 price of a GR30R but better performance. time to step it up a bit :) I really want to see what damage this does on a built motor. 24-26PSI. I know it made excellet power on a GTI my friend has. he saw 350ish WHP at something like 5800RPM before he leaned out and had to let off. |
Get this turbo, run 20+ psi, win at life.
I'll bet it will make an easy 400 without even pushing the boost too much. If I didn't have my 2876 already I'd get this in a heartbeat. |
Originally Posted by 18psi
(Post 901455)
Get this turbo, run 20+ psi, win at life.
I'll bet it will make an easy 400 without even pushing the boost too much. If I didn't have my 2876 already I'd get this in a heartbeat. Thanks for the input |
All times are GMT -4. The time now is 01:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands