Originally Posted by Kyuss
(Post 781966)
sent you a pm and email. will take the frame rail stiffeners, fm sway bar, trunk lip spoiler if still avail. Brake kit. Front strut support with brake master support? Do you still have the cops you made in your build?
PM me the details for payment/availability thanks SpenceChristopher@yahoo.com
Originally Posted by Kyuss
(Post 781975)
Did you do a coolant re-route? What mods are required to set up that intake?
|
Originally Posted by djp0623
(Post 781514)
How much for the gauge and sender (assuming sender thread size is same as miata) Is that the 2" gauge?
|
Email sent, add the coolant re route to my list.
|
More stuff gone! Main list has been updated....
I appologize once again if I have missed someones email or pm. It's not intentional, I just can keep up :giggle: . If I have'nt responded, please send me another message, preferably a email. Thanks! |
Man your car was definitely one of my wants but I'm near and dear with the nb so I couldn't pull the trigger. So tragic to see it come to this.
|
I sound like a broken record, but more stuff gone
AND original post has been updated! Thanks for making this a fairly quick process guys! |
Decided it would be easier to consolidate the list....here's what I have left, damn this went fast!
LSD Rear End w/ Delrin Mounts WITH AXLES (1.8 rear with rx7 clutch packs) $500 1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) $250 Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)$250 Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) $200 Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece Stock Guage Cluster $30 Center Console $30 Triangle Windows $25 Drop in Windows $50 Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $50 Door Panels $50 Radiator w/ fan(Custom Aluminum) 24"x19"x3" $150 Flyin Miata Sway Bar $75 Stock Rear Sway Bar $Free 1.8L Brake Setup, rotors, calipers, brackets, ebc red pads, stainless braided lines $300 1.6L Ignition Coil $50 Ignitor $20 Plug Wires $20 Smoked Stock Tail Lights $50 Sheet Metal Frame Rails w/ Hardware $75 Brake Master Cylinder and Booster $50 1.8L Drive Shaft $50 OBO Rear Bumper $Free with a purchase of 50 or more, lol Rear Finishing panel (No cracks) $40 Trunk Lid $20 Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something |
How much would shipping be for the rear sway to 35802?
|
PM and email sent for the brakes.
|
Originally Posted by djp0623
(Post 784408)
How much would shipping be for the rear sway to 35802?
|
Originally Posted by Cspence
(Post 784821)
Not really looking to ship it...mostly posted it for free to the local guys, otherwise in the dumpster it goes :giggle:
|
Bump for a super cool guy!
|
Can I use OEM fans on the radiator and if so, will you seperate them? I need a radiator for my daily.
|
Originally Posted by hustler
(Post 785205)
Can I use OEM fans on the radiator and if so, will you seperate them? I need a radiator for my daily.
On another note, tonight was the last time I'll ever see the miata :facepalm:, but I had a few good laughs with these guys that spoke about 4 words of english lmao https://www.miataturbo.net/attachmen...ine=1318985033 https://www.miataturbo.net/attachmen...ine=1318985033 https://www.miataturbo.net/attachmen...ine=1318985033 https://www.miataturbo.net/attachmen...ine=1318985033 |
:sadwavey:
|
PM sent
|
LSD Rear End w/ Delrin Mounts WITH AXLES (1.8 rear with rx7 clutch packs) SOLD! $500
1.8L Tranny (Grinds a little on 1 - 2 shifts if driving spiritedly, otherwise its fine) $250 Wheel Spacers (Motorsport Tech) 30mm - 2.8#s and 19mm - 2.05#s with the adapter nuts (Includes custom install tool and acorn nuts)$250 Hood (Stock aluminum polished with Z34 Vent and molded barn doors, not astetically perfect) $200 Guage Panel (Custom Cspence Special ) $40 or $75 including the center console to dash trim piece Stock Guage Cluster $30 Center Console $30 Triangle Windows FREE WITH DOORS Drop in Windows $FREE WITH DOORS Gutted Doors (Easy way to drop some weight, still have mounting spots for speakers) $FREE Door Panels $COME WITH DOORS FOR FREE Radiator w/ fan(Custom Aluminum) 24"x19"x3" $150 Flyin Miata Sway Bar $75 Stock Rear Sway Bar $Free 1.8L Brake Setup, rotors, calipers, brackets, ebc red pads, stainless braided lines $300 1.6L Ignition Coil $50 Ignitor $20 Plug Wires $20 Smoked Stock Tail Lights $50 Sheet Metal Frame Rails w/ Hardware $75 Brake Master Cylinder and Booster $50 1.8L Drive Shaft SOLD! $50 OBO Rear Finishing panel (No cracks) $40 Trunk Lid $FREE - Pick it up or it goes in the trash Flyin Miata Clutch Override Switch Free to someone that comes (in person) and buys something |
That is an epic way to transport a miata. if only I could get to the track like that.
|
Email sent i think.
|
Post 57 updated....door setup is free to the first person that picks it up otherwise its getting scrapped...trunk lid is about to get tossed, last call!
|
All times are GMT -4. The time now is 04:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands