Denso Injector rebuild kits
09-08-2014, 07:08 PM
#22
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2012
Location: Phoenix, AZ
Posts: 148
Total Cats: 8
Here are all the details and information that should answer your questions:
I feel that I am finally ready to offer injector cleaning services to the members of Clubprotege and Miataturbo, after spending some time learning to use the machine and trying different sets of injectors with it. Due to some limitations on my end and limitations of my machine, some things need to be noted:
1: I only have a very small stock of injector service parts, so full service can only be offered on certain injectors, which are anything I already offer kits for.
2: Due to the limitations of my machine, I will not be able to get accurate flow data for injectors of approx 450cc and larger since the test tubes will overflow. If I encounter this problem I will manually stop the machine at 5sec and calculate the flow rate from that time instead of the 15sec time set by the machine, but this is not exactly accurate since I cant stop the machine in the exact same point every time.
3: No side feed injectors can be currently serviced.
4: I may not have the required adapters to do a back-flush on all injectors
5: Any problems or limitations with my service will be notified by PM or email, and the appropriate action taken. Price adjustment, partial refund etc....
6: Flow bench test will be done 3 times before and 3 times after service. I calculate the average of the 3 runs to determine flow rating due to variables in the machine, fluid, and fluid temperature.
Pricing:
Full injector service pricing will be $14 per injector + $5.50 return shipping.
Injector cleaning only will be $11 per injector + $5.50 return shipping. **No service parts replaced**
A full set of injectors (4+) will include return shipping at no additional cost.
Full injector service pricing for locals will be $13 per injector
Injector cleaning only price for locals will be $10 per injector
Injector service details: ***Full service only
Check coil resistance
External cleaning
Flow bench
Remove Service parts***
Two 20-minute ultrasonic cleaning cycles
*Cycle includes injector held wide open and pulsed
Back flush injector***
Flow bench
Replace serviceable parts***
Bag/number all injectors and old service parts
Before/After results printout
Shipping and payment:
PM me for my shipping and payment information
All injectors should be completely dry of fuel and bagged for shipping.
I recommend using USPS small flat rate boxes for shipping
Please include your return address and screen name in the box so I know who they are for when they arrive.
Payment can be made by paypal once the injectors are ready to be shipped back. I will send a PM when they are ready.
I will send a PM with a tracking number after I receive payment.
Please allow 1-2 business days for injectors to be serviced before expecting a PM for completion of service.
Let me know if there are any other questions you guys may have.
I feel that I am finally ready to offer injector cleaning services to the members of Clubprotege and Miataturbo, after spending some time learning to use the machine and trying different sets of injectors with it. Due to some limitations on my end and limitations of my machine, some things need to be noted:
1: I only have a very small stock of injector service parts, so full service can only be offered on certain injectors, which are anything I already offer kits for.
2: Due to the limitations of my machine, I will not be able to get accurate flow data for injectors of approx 450cc and larger since the test tubes will overflow. If I encounter this problem I will manually stop the machine at 5sec and calculate the flow rate from that time instead of the 15sec time set by the machine, but this is not exactly accurate since I cant stop the machine in the exact same point every time.
3: No side feed injectors can be currently serviced.
4: I may not have the required adapters to do a back-flush on all injectors
5: Any problems or limitations with my service will be notified by PM or email, and the appropriate action taken. Price adjustment, partial refund etc....
6: Flow bench test will be done 3 times before and 3 times after service. I calculate the average of the 3 runs to determine flow rating due to variables in the machine, fluid, and fluid temperature.
Pricing:
Full injector service pricing will be $14 per injector + $5.50 return shipping.
Injector cleaning only will be $11 per injector + $5.50 return shipping. **No service parts replaced**
A full set of injectors (4+) will include return shipping at no additional cost.
Full injector service pricing for locals will be $13 per injector
Injector cleaning only price for locals will be $10 per injector
Injector service details: ***Full service only
Check coil resistance
External cleaning
Flow bench
Remove Service parts***
Two 20-minute ultrasonic cleaning cycles
*Cycle includes injector held wide open and pulsed
Back flush injector***
Flow bench
Replace serviceable parts***
Bag/number all injectors and old service parts
Before/After results printout
Shipping and payment:
PM me for my shipping and payment information
All injectors should be completely dry of fuel and bagged for shipping.
I recommend using USPS small flat rate boxes for shipping
Please include your return address and screen name in the box so I know who they are for when they arrive.
Payment can be made by paypal once the injectors are ready to be shipped back. I will send a PM when they are ready.
I will send a PM with a tracking number after I receive payment.
Please allow 1-2 business days for injectors to be serviced before expecting a PM for completion of service.
Let me know if there are any other questions you guys may have.
Reply
0
0
09-09-2014, 11:08 AM
#23
I can't PM yet, almost there... I have 8 323 GTX injectors but only need 4 that flow perfectly. Can I send 8 and have 4 fully serviced, then based on the outcome of the post-service flow testing have another one or 2 serviced as needed for the best possible set of 4? I'm in no hurry and would pay for as many are serviced of course. You can email me at lars1214@gmail.com or just reply in case anyone else would want similar service.
Reply
0
0
09-09-2014, 11:39 AM
#24
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2012
Location: Phoenix, AZ
Posts: 148
Total Cats: 8
I can't PM yet, almost there... I have 8 323 GTX injectors but only need 4 that flow perfectly. Can I send 8 and have 4 fully serviced, then based on the outcome of the post-service flow testing have another one or 2 serviced as needed for the best possible set of 4? I'm in no hurry and would pay for as many are serviced of course. You can email me at lars1214@gmail.com or just reply in case anyone else would want similar service.
Reply
0
0
11-13-2014, 12:37 PM
#28
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2012
Location: Phoenix, AZ
Posts: 148
Total Cats: 8
I can now service Mazda side feed injectors if anyone needs this done.
Full service for 6 injectors will be $84 with return shipping included.
Rebuild kits also available for all Miata injectors and K-series V6 injectors.
Full service for 6 injectors will be $84 with return shipping included.
Rebuild kits also available for all Miata injectors and K-series V6 injectors.
Reply
0
0
02-15-2015, 11:39 PM
#33
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2012
Location: Phoenix, AZ
Posts: 148
Total Cats: 8
Just a not for people that have bought kits and future customers:
When installing pintle caps its best to use something like petroleum jelly or some other lubricant to help slide it on otherwise they may split in half if they are forced on or another method is to use a heat gun to slightly soften the plastic so it will stretch over the cap.
When installing pintle caps its best to use something like petroleum jelly or some other lubricant to help slide it on otherwise they may split in half if they are forced on or another method is to use a heat gun to slightly soften the plastic so it will stretch over the cap.
Reply
0
0
03-03-2015, 09:38 PM
#34
Junior Member
Thread Starter
iTrader: (6)
Join Date: Feb 2012
Location: Phoenix, AZ
Posts: 148
Total Cats: 8
Since I have had a lot of PM's asking lately..... I do sell individual injector pieces for those of you running EV14/Supra/ID injectors and other applications that dont need full kits.
Reply
0
0
