Ed's 2004 Ti Mazdaspeed Miata Partout Thread
#1
Supporting Vendor
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,956
Total Cats: 1,008
Ed's 2004 Ti Mazdaspeed Miata Partout Thread
MUHAHAHAHAHAHAHA....
It's partout time.
2004 Mazdaspeed MX-5 with about 85k miles on the car. Aftermarket parts have way less miles on them.
*** THE FOLLOWING PARTS WERE DESTROYED IN THE ACCIDENT AND ARE NOT AVAILABLE ***
-Front and rear bumpers
-Passenger fender
-trunk (spoiler is good, and listed below)
-driver taillight
-Passenger rear control arms
Doing a separate feeler thread shortly for the drivetrain stuff. Haven't yet fully decided to sell but if there is interest it might motivate me to move it sooner.
I am throwing prices out there. If I'm way off, send me a price you think is more realistic. DO NOT ask me "what's the lowest you'll go" on a given part. If you want to make an offer, make an offer.
If a price is not listed as shipped, then it's plus shipping. You'll pay actual shipping. If it's a big item I'd rather not ship but send me a PM and we'll work it out.
PLEASE BE PATIENT WITH PULLING AND SHIPPING PARTS. The car is mostly complete, it's Christmas time, and I'm traveling over new year's. I'll try to get the parts pulled in a timely fashion and shipped, but expect most parts to arrive closer to the end of January unless I've told you otherwise via PM. If you need something sooner let me know and I'll see what I can do.
AEM EMS-4, PNP for MSM. $800 shipped. SOLD
Exterior Body parts available:
-driver side fender $250
-both doors, have tinted glass installed $250. if you want the door cards too (red insert) then $400 for passenger side, $325 for driver side as driver door card has some damage from PO's Recaro SPG rubbing it.
-MSM headlights (passenger has a nick in the bottom, can post pics later) $250 shipped driver side, $200 shipped passenger side, or $400 shipped for both
-driver side MSM taillight, and both pigtails for NB1 to NB2 taillight conversion $make offer
-rear spoiler $250 shipped
-a cracked Mazdaspeed badge from the back $free with another purchase
-rear lip (rear bumper is destroyed, but the lip part is fine) $150 shipped
-MSM hood $250 SOLD
Feel free to make offers...
Interior parts:
-Mazdaspeed stainless Door sill trim plates $115 shipped
-full carpet (some cuts to fit roll bar) $offer
-stock passenger seat $offer
-Dashboard, perfect condition except missing the far left eyeball vent. $350
-NB2 center console $200 shipped
-Heater core, just installed it the week before the accident, works perfect
-Mazdaspeed rear-view mirror $50 shipped
-HVAC controls SOLD
-Pedals SOLD
Chassis bits:
-MSM strut tower brace with mounts, tube removed, $115 shipped
-MSM front sway $60 SOLD
-MSM rear sway $150 shipped; $200 SOLD
-ALL THE BRAKES. Includes stainless steel braided lines. The lines have some abrasion through the outside plastic around the stainless from rubbing on something in front. Not sure what this is worth with the lines, What all do you need for this? Calipers, rotors? Do you need the hubs too? Make an offer on this.
Other random stuff:
-poly diff bushings, $50 shipped
-NRG FRP driver seat, side mounts are bent so you'll need new side mounts, $50
-There's going to be more here for sure... I just need to get it organized.
There will be photos of everything, and I'm just trying to throw this up there to see what people might be interested in. If you don't see a part listed, feel free to ask about it.
I SHOULD be able to get most of the stuff pulled and shipped next weekend.
It's partout time.
2004 Mazdaspeed MX-5 with about 85k miles on the car. Aftermarket parts have way less miles on them.
*** THE FOLLOWING PARTS WERE DESTROYED IN THE ACCIDENT AND ARE NOT AVAILABLE ***
-Front and rear bumpers
-Passenger fender
-trunk (spoiler is good, and listed below)
-driver taillight
-Passenger rear control arms
Doing a separate feeler thread shortly for the drivetrain stuff. Haven't yet fully decided to sell but if there is interest it might motivate me to move it sooner.
I am throwing prices out there. If I'm way off, send me a price you think is more realistic. DO NOT ask me "what's the lowest you'll go" on a given part. If you want to make an offer, make an offer.
If a price is not listed as shipped, then it's plus shipping. You'll pay actual shipping. If it's a big item I'd rather not ship but send me a PM and we'll work it out.
PLEASE BE PATIENT WITH PULLING AND SHIPPING PARTS. The car is mostly complete, it's Christmas time, and I'm traveling over new year's. I'll try to get the parts pulled in a timely fashion and shipped, but expect most parts to arrive closer to the end of January unless I've told you otherwise via PM. If you need something sooner let me know and I'll see what I can do.
AEM EMS-4, PNP for MSM. $800 shipped. SOLD
Exterior Body parts available:
-driver side fender $250
-both doors, have tinted glass installed $250. if you want the door cards too (red insert) then $400 for passenger side, $325 for driver side as driver door card has some damage from PO's Recaro SPG rubbing it.
-MSM headlights (passenger has a nick in the bottom, can post pics later) $250 shipped driver side, $200 shipped passenger side, or $400 shipped for both
-driver side MSM taillight, and both pigtails for NB1 to NB2 taillight conversion $make offer
-rear spoiler $250 shipped
-a cracked Mazdaspeed badge from the back $free with another purchase
-rear lip (rear bumper is destroyed, but the lip part is fine) $150 shipped
-MSM hood $250 SOLD
Feel free to make offers...
Interior parts:
-Mazdaspeed stainless Door sill trim plates $115 shipped
-full carpet (some cuts to fit roll bar) $offer
-stock passenger seat $offer
-Dashboard, perfect condition except missing the far left eyeball vent. $350
-NB2 center console $200 shipped
-Heater core, just installed it the week before the accident, works perfect
-Mazdaspeed rear-view mirror $50 shipped
-HVAC controls SOLD
-Pedals SOLD
Chassis bits:
-MSM strut tower brace with mounts, tube removed, $115 shipped
-MSM front sway $60 SOLD
-MSM rear sway $150 shipped; $200 SOLD
-ALL THE BRAKES. Includes stainless steel braided lines. The lines have some abrasion through the outside plastic around the stainless from rubbing on something in front. Not sure what this is worth with the lines, What all do you need for this? Calipers, rotors? Do you need the hubs too? Make an offer on this.
Other random stuff:
-poly diff bushings, $50 shipped
-NRG FRP driver seat, side mounts are bent so you'll need new side mounts, $50
-There's going to be more here for sure... I just need to get it organized.
There will be photos of everything, and I'm just trying to throw this up there to see what people might be interested in. If you don't see a part listed, feel free to ask about it.
I SHOULD be able to get most of the stuff pulled and shipped next weekend.
Last edited by turbofan; 12-12-2014 at 04:38 PM.
#2
Supporting Vendor
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,956
Total Cats: 1,008
Headlight pics. You'll notice that there's a little more plastic that needs repairing on the passenger side headlight, more than I noticed previously. I have dropped the price dramatically because of that.
Last edited by turbofan; 12-18-2014 at 10:44 PM.
#6
Supporting Vendor
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,956
Total Cats: 1,008
Added brakes. Make an offer. To upgrade to this brake kit you just need the calipers and rotors right? They are aggressive pads but I'm not 100% sure what's in there as they were done by the PO.
#8
Supporting Vendor
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,956
Total Cats: 1,008
Stock MSM with (I believe) hawk pads. DTC 60 seems to ring a bell? I think I have the box at home.
Going to do a harbor freight run tonight and take some more stuff apart. Will get some pics too.
Going to do a harbor freight run tonight and take some more stuff apart. Will get some pics too.