FM Intercooler Kit
11-05-2016, 06:24 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2006
Location: Reading PA
Posts: 165
Total Cats: 56
FM Intercooler Kit
SOLD
Selling intercooler, pipes, silcone connectors and constant torque hose clamps. Why am I selling? I recently built my engine and want to run 15psi to 16psi. This intercooler drops about 3psi at 15psi so I'm upgrading to something that flows better. Up to 12 psi this intercooler flows enough to make 264hp at 12psi. Dyno plot in this thread, https://www.miataturbo.net/dynos-tim...-gt2560-89145/
This is a complete intake and intercooler system from the air filter to the throttle body. The kit was manufactured in 2002 for an FMII turbo kit when BEGi was making the intercoolers and pipes for FM. It will fit all NBs with a 2.5" compressor inlet. The pipes are steel. The original powder coat flaked off so I had all the pipes coated in gloss black, inside and outside. On the two pipes visible when the hood is raised, the welds are ground down for a seamless look. The throttle inlet pipe has a 3/8NPT fitting for a GM ATS. The compressor inlet pipe is designed for the OEM ECU, it has a hole for the OEM ATS and needs a MAF or a piece of 2.75" piping to mount the air filter. A filter will be included with the price. The pipes are designed for a recirculating BOV on the hot side of the engine. I am using a Turbosmart Kompact valve. If you need a BOV I can include my Kompact for an additional $75. Price is $350 shipped (w/o BOV), UPS Ground.to the contiguous 48 states.
Selling intercooler, pipes, silcone connectors and constant torque hose clamps. Why am I selling? I recently built my engine and want to run 15psi to 16psi. This intercooler drops about 3psi at 15psi so I'm upgrading to something that flows better. Up to 12 psi this intercooler flows enough to make 264hp at 12psi. Dyno plot in this thread, https://www.miataturbo.net/dynos-tim...-gt2560-89145/
This is a complete intake and intercooler system from the air filter to the throttle body. The kit was manufactured in 2002 for an FMII turbo kit when BEGi was making the intercoolers and pipes for FM. It will fit all NBs with a 2.5" compressor inlet. The pipes are steel. The original powder coat flaked off so I had all the pipes coated in gloss black, inside and outside. On the two pipes visible when the hood is raised, the welds are ground down for a seamless look. The throttle inlet pipe has a 3/8NPT fitting for a GM ATS. The compressor inlet pipe is designed for the OEM ECU, it has a hole for the OEM ATS and needs a MAF or a piece of 2.75" piping to mount the air filter. A filter will be included with the price. The pipes are designed for a recirculating BOV on the hot side of the engine. I am using a Turbosmart Kompact valve. If you need a BOV I can include my Kompact for an additional $75. Price is $350 shipped (w/o BOV), UPS Ground.to the contiguous 48 states.
Last edited by Ken Hill; 11-12-2016 at 05:07 PM. Reason: Parts sold
Reply
0
0
