FMII Manifold and GT2560R
#1
Elite Member
Thread Starter
iTrader: (33)
Join Date: Jan 2007
Location: Newnan, GA
Posts: 2,518
Total Cats: 30
FMII Manifold and GT2560R
I'm considering selling my FM manifold and my GT2560R so I can switch over to a new BEGi manfold and a GT2871R turbo.
The manifold is one of the older FM designs, and the GT2560R came with it as part of an FMII kit. I'm unsure of the actual mileage, but I've put 30k miles on it, and it's still in great condition. Spins great with the normal ball bearing movement. Has been water and oil cooled of course.
I would like $850 + 1/2 the actual cost of shipping (normally I include shipping, but this will have some weight, and I'm in the middle of an engine build, so not possible right now) for the pair, but if seperated, both must have confirmed buyers before the sale is final.
Price seperate:
FM Manifold: $250
GT2560R: $600
I'll get pics up if they are needed.
Please reply here as my inbox gets full rather quickly and I check this site constantly!
The manifold is one of the older FM designs, and the GT2560R came with it as part of an FMII kit. I'm unsure of the actual mileage, but I've put 30k miles on it, and it's still in great condition. Spins great with the normal ball bearing movement. Has been water and oil cooled of course.
I would like $850 + 1/2 the actual cost of shipping (normally I include shipping, but this will have some weight, and I'm in the middle of an engine build, so not possible right now) for the pair, but if seperated, both must have confirmed buyers before the sale is final.
Price seperate:
FM Manifold: $250
GT2560R: $600
I'll get pics up if they are needed.
Please reply here as my inbox gets full rather quickly and I check this site constantly!
#2
Junior Member
iTrader: (2)
Join Date: Aug 2006
Location: Louisville Kentucky
Posts: 222
Total Cats: 0
I'm interested in the manifold if you could email the pictures to my email twoscoopsofhooah@yahoo.com
#3
Elite Member
Thread Starter
iTrader: (33)
Join Date: Jan 2007
Location: Newnan, GA
Posts: 2,518
Total Cats: 30
How about pictures here?
I should add that the manifold is ready to have the EGR port either plugged or have another EGR fitting installed.
Also, the turbine outlet flange on the turbo has been made flat again. But it should be noted that one of the stud holes got stripped out, so it needs to be tapped for a 10mm stud. If you have a normal downpipe, that's not a problem, actually it's recommended, but the BEGi divorced gases downpipe will only fit 8mm studs, so if you have one of those or an 8mm only DP, I will include a new 10mm-8mm step stud.
Anyway, pictures:
I should add that the manifold is ready to have the EGR port either plugged or have another EGR fitting installed.
Also, the turbine outlet flange on the turbo has been made flat again. But it should be noted that one of the stud holes got stripped out, so it needs to be tapped for a 10mm stud. If you have a normal downpipe, that's not a problem, actually it's recommended, but the BEGi divorced gases downpipe will only fit 8mm studs, so if you have one of those or an 8mm only DP, I will include a new 10mm-8mm step stud.
Anyway, pictures:
#5
:bowr ofl:
:bowr ofl:
I knew you had the itch.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
:bowr ofl:
I knew you had the itch.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#6
Elite Member
Thread Starter
iTrader: (33)
Join Date: Jan 2007
Location: Newnan, GA
Posts: 2,518
Total Cats: 30
Well, I pm'd you back jerk-off, and I said we'd leave you buying the turbo a secret, but you f-ed that up. lol
Anyway, if TwoScoopsofHooah is serious about the manifold, we'll be all set.
However, I have to throw a curve out there though, the GT2871R I was lined up to buy tonight fell through because the turbine was an .86, and the guy lied to me and said he was 100% sure it was a .64. When I went to pick it up and saw .86 inside the inlet, I was mighty upset. I made him pay for my gas.
If it's ok with the potential buyers, I'd like to have at least my new turbo before I sell these items.
Anyway, if TwoScoopsofHooah is serious about the manifold, we'll be all set.
However, I have to throw a curve out there though, the GT2871R I was lined up to buy tonight fell through because the turbine was an .86, and the guy lied to me and said he was 100% sure it was a .64. When I went to pick it up and saw .86 inside the inlet, I was mighty upset. I made him pay for my gas.
If it's ok with the potential buyers, I'd like to have at least my new turbo before I sell these items.
#8
Elite Member
Thread Starter
iTrader: (33)
Join Date: Jan 2007
Location: Newnan, GA
Posts: 2,518
Total Cats: 30
Ah, you know you missed it!
Just set aside some money for the turbo! It's yours as long as I have someone for the manifold. If someone doesn't come along, we'll work something out so you can get them both.
Just set aside some money for the turbo! It's yours as long as I have someone for the manifold. If someone doesn't come along, we'll work something out so you can get them both.
#11
Man I should be a psychic. I knew this was coming.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#14
Elite Member
Thread Starter
iTrader: (33)
Join Date: Jan 2007
Location: Newnan, GA
Posts: 2,518
Total Cats: 30
It is and I am. I did get your PM asking about shipping. As soon as everything is squared away on my end I'll start taking care of that aspect. I'm sorry that it is taking longer than I expected, but it will be done soon.