I would be interested in a trade for a : MSpnp,roll bar,t25 manifold/dp, momo wrc/-r
|
I have a never installed, Braineack built, DIYPNP. It's an early build, I think a v1.1 board with the sequential injection module added.
I'd be using this on a non-Miata application. Can you tell me the distance between the mounting legs/stantions? |
Ok thanks for the offer, I will keep that in mind. I can measure it tomorrow. I will provide the distance from bolt hole to bolt hole on the apr legs(on bottom) as well as the inside edge to edge of the legs. The wing has 4 seperate square pads that can bolt to said holes witch provides the legs, say a 2" square base, 2 on both legs. I can measure the inside edges of said pads as well if needed. IIRC the legs should be either 32" center to center, or other location, I belive is 42". That would be center to center. I will confirm tomorrow.
|
Is the T25 manifold you are looking for need to be for a 1.6 still?
|
ok I got the measurements from inside edge to edge. Starting at the leading edge, 41.5, rear edge is 42". I was rushed out of the shop and didnt get the pcd of the mouting holes on the legs. But iirc that should be about 42" at the leading side, and 42.5" at the rear. With the pads on, the inside distance drops to 39.5".
Chili - yes 1.6er |
Originally Posted by brainzata
(Post 1218974)
ok I got the measurements from inside edge to edge. Starting at the leading edge, 41.5, rear edge is 42". I was rushed out of the shop and didnt get the pcd of the mouting holes on the legs. But iirc that should be about 42" at the leading side, and 42.5" at the rear. With the pads on, the inside distance drops to 39.5".
Chili - yes 1.6er |
What do you value it at? I'm not sure how much the old v's hold value when there are all of the newer editions. You can text me 925-360-3018
|
Originally Posted by brainzata
(Post 1219554)
What do you value it at? I'm not sure how much the old v's hold value when there are all of the newer editions. You can text me 925-360-3018
I'd be willing to add some cash to the deal but not a whole lot. Someone linked a vendor in this thread selling the same wing for $610 brand new with free shipping. Your pre-drilled mounts wouldn't be useful to me because I won't be using the wing on a Miata. |
I understand. I had agreed to Mr wob on 500, he ended up getting one locally. 500$ picked up.
|
If still available, please PM me.
|
PM'd
|
All times are GMT -4. The time now is 07:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands