FS: assembled MS2 for 1.6L plus more - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


Miata parts for sale/trade Buy, trade or sell your Miata parts here.

Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 09-02-2012, 05:53 PM   #1
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default FS: assembled MS2 for 1.6L plus more

So, last year, I built an MS2 based megasquirt, following all the threads here to the letter. Included all the recommended mods, etc. (see list below), and right about when I finished it, my son was born, and my day job got incredibly busy. So, once I finished it, I had hooked up it up to the JimStim v1.5 and to my laptop and installed the MS2extra firmware. It seemed to communicate ok except that the tach signal would not sync so I couldn't properly test everything. I am 99% sure that this issue was due to a crappy serial to USB cable adaptor that I was using. But, I just completely lost any chance I had at time to troubleshoot it. So here I am a year later, and the car has since been sold (no time to even make it to open track days) and I'm only now finally getting around to putting the MS2 up for sale as well. I did not build the harness cable, but everything is there, so you will have to build that part, and recheck everything before installing in your car, but everything you need should be included.

Assembled MS2 on a v3.0 board
PWM IAC modkit
Fan control relay mod
Boost control modkit
I also did the latest ignition circuit mods per all the threads discussing it
23" wiring bundle, plus female harness connector for 1.6L
IAT kit, unused, including steel bung
JimStim v1.5

Unused Innovate MTX-L wideband w/ integrated guage


I have about $600 into all these components, plus build time. I'm willing to pack it all up and ship it to someone in the lower 48 states for $500.
Keep in mind, while I'm 99% sure it is just fine, it will be the buyer's responsibility to confirm, and finish sorting everyhting out. I won't be able to help. If I had time to do it for you, I wouldn't be selling it in the first place
I can provide pics of everything if you send me your email address, but if you aren't interested in exactly what is described above, then don't bother asking for pics.

I also have the following items that I'll be putting up for sale soon as well, but would be willing to work out a package deal.
pair of Momo Start fixed back race seats with NA miata seat tracks already installed. (note they are same model seat, but different years, so they look slightly different)
G-force 6-pt harnesses, that go with the seats above

RX7 injectors, I believe they are 460cc, but its been awhile since I've looked.

All items are located in Westland, MI in the Metro Detroit area.

Please contact me by email rarasvt (at) gmail dot com or by PM here.

Fwiw, I'm looking for a Canon EOS T4i, so that would be about the only thing I'd be interested in for trade, except maybe firearms from the local guys.
Rara is offline   Reply With Quote
Old 09-02-2012, 05:54 PM   #2
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

eh, sorry for the difficult to read formatting.
Rara is offline   Reply With Quote
Old 09-02-2012, 10:04 PM   #3
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

Just to be clear the $500 is shipped with everything I have for the ms2 including the brand new in box mtx-l wideband. And because I'm a nice guy ill offer the used rx7 injectors to whever buys the ms2 for an extra $40, which IIRC is pretty cheap.
Rara is offline   Reply With Quote
Old 09-03-2012, 06:10 AM   #4
Junior Member
iTrader: (1)
 
Join Date: Aug 2009
Location: Hawaii
Posts: 82
Total Cats: -1
Default

Price on the seats and harness?
Too big to ship or what?
thejman808 is offline   Reply With Quote
Old 09-03-2012, 08:37 AM   #5
Newb
 
Join Date: Jun 2012
Posts: 34
Total Cats: 0
Default

hi sorry i cant pm you.
but can you pm me some pic of both side of the board.
also will you post to australia?
thank you
taocle is offline   Reply With Quote
Old 09-03-2012, 10:41 AM   #6
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

Justin, I would be willing to do $500 also for the seats and harnesses together, not including shipping. Shipping is possible but tends to be difficult and very expensive. Send me an email at the address I listed and I can send pics of the seats, and depending where you are, we might be able to work something out for delivery.

Tao, send me an email to the address listed above, and I will respond with detail pics. I will consider posting to Australia, but you would be responsible for any shipping costs or taxes etc. My sister lives in Melbourne, so I can check with her on how its done properly.
Rara is offline   Reply With Quote
Old 09-03-2012, 12:17 PM   #7
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

fyi, I just checked, and I was wrong on the injectors, they are 550cc, the red top ones.
Rara is offline   Reply With Quote
Old 09-03-2012, 06:15 PM   #8
Newb
 
Join Date: Jun 2012
Posts: 34
Total Cats: 0
Default

[email protected]
thank you.
taocle is offline   Reply With Quote
Old 09-03-2012, 11:18 PM   #9
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

email sent.
Rara is offline   Reply With Quote
Old 09-04-2012, 04:27 PM   #10
Junior Member
 
Join Date: Aug 2012
Location: Santa Fe, NM
Posts: 99
Total Cats: -24
Default

Pm sent about Ms
coltonr is offline   Reply With Quote
Old 09-04-2012, 04:45 PM   #11
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

Lots of interest, but no cash in hand... All emails and PMS replied to.
Rara is offline   Reply With Quote
Old 09-05-2012, 06:03 PM   #12
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

fyi, injectors are sold. Everything else is still available until I have money in-hand...
Rara is offline   Reply With Quote
Old 09-07-2012, 05:21 PM   #13
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

ugh, I hate it when people flake...

Anyway, I'll take $450 shipped (cont. US) if someone buys it this weekend.
Don't forget, this is a full MS2, w/ all the miata specific mods including boost control, fully built, you just need to build the harness adaptor (parts included) and verify everything works correctly. Stim for troubleshooting and an Innovate MTX-L wideband (new in box) are both included...
Rara is offline   Reply With Quote
Old 09-16-2012, 11:21 AM   #14
Newb
 
Join Date: Jun 2012
Posts: 34
Total Cats: 0
Default

450$ shipped to aus then I'll take it
taocle is offline   Reply With Quote
Old 09-19-2012, 01:21 AM   #15
Newb
Thread Starter
 
Join Date: May 2011
Location: metro Detroit
Posts: 44
Total Cats: 0
Default

MS2 and wideband are sold, thanks.

I do still have the seats and harnesses available, I also have a tire trailer with locking box on it too for any local autoX/open track guys. I'll eventually get around to making a seperate thread with proper pics, etc, unless someone takes advantage of me being busy and comes to buy it all cheap, lol.
Rara is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Raleigh: Fiberglass headlight scope, 1.6L ECU, AFM, Hardtop latches, more bigmackloud Miata parts for sale/trade 13 09-22-2017 01:34 PM
91 1.6l turbo complete part out. Tony the Tiger Miata parts for sale/trade 63 12-29-2016 03:23 AM
Need help - Stock Balancer and Fastforward overlay pulleys Frank_and_Beans Supercharger Discussion 13 09-12-2016 09:17 PM
OTS Bilstein to motorsports ASN conversion stoves Suspension, Brakes, Drivetrain 5 04-21-2016 04:00 PM
Back to Stock Part Out!! Turbo Parts, MS2 Enhanced 01-05, Suspension, and MOAR! StratoBlue1109 Miata parts for sale/trade 16 10-02-2015 10:39 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 09:11 AM.